相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A thermogravimetric assessment of the tri-combustion process for coal, biomass and polyethylene
Liao Xinjie et al.
FUEL (2021)
Thermohydraulic performance optimization of cooling system of an electric arc furnace operated with nanofluid: A CFD study
Ali Akbar Ahmadi et al.
JOURNAL OF CLEANER PRODUCTION (2021)
An overview on engineering the surface area and porosity of biochar
Lijian Leng et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2021)
Effect of the temperature on the spent coffee grounds torrefaction process in a continuous pilot-scale reactor
M. Barbanera et al.
FUEL (2020)
Pyrolysis of single biomass particle using three-dimensional Computational Fluid Dynamics modelling
W. A. M. K. P. Wickramaarachchi et al.
RENEWABLE ENERGY (2020)
Advanced design optimization of combustion equipment for biomass combustion
Joseph D. Smith et al.
RENEWABLE ENERGY (2020)
Combustion models for biomass: A review
Garikai T. Marangwanda et al.
ENERGY REPORTS (2020)
Optimizing the torrefaction of pigeon pea stalk (cajanus cajan) using response surface methodology (RSM) and characterization of solid, liquid and gaseous products
Rishikesh Kumar Singh et al.
RENEWABLE ENERGY (2020)
Combustion behaviour of biochars thermally pretreated via torrefaction, slow pyrolysis, or hydrothermal carbonisation and co-fired with pulverised coal
Lichun Chen et al.
RENEWABLE ENERGY (2020)
Numerical simulation of combustion behaviors of hydrochar derived from low-rank coal in the raceway of blast furnace
Cuiliu Zhang et al.
FUEL (2020)
On the self-heating behavior of upgraded biochar pellets blended with pyrolysis oil: Effects of process parameters
Lorenzo Riva et al.
FUEL (2020)
Use of Biochar for Sustainable Ferrous Metallurgy
Lei Ye et al.
JOM (2019)
Numerical simulation of circulating fluidized bed oxy-fuel combustion with Dense Discrete Phase Model
Ying Wu et al.
FUEL PROCESSING TECHNOLOGY (2019)
Review on Modeling and Simulation of the Electric Arc Furnace (EAF)
Hans-Juergen Odenthal et al.
STEEL RESEARCH INTERNATIONAL (2018)
CFD simulation of sugarcane bagasse combustion in an industrial grate boiler
Fabian Andrey Diaz-Mateus et al.
Dyna-Colombia (2018)
Discrete phase numerical model and experimental study of hybrid nanofluid heat transfer and pressure drop in plate heat exchanger
Atul Bhattad et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)
A review of the hydrothermal carbonization of biomass waste for hydrochar formation: Process conditions, fundamentals, and physicochemical properties
Tengfei Wang et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Acceleration of Carburization and Melting of Reduced Iron in Iron Ore Carbon Composite Using Different Types of Carbonaceous Materials
Taichi Murakami et al.
ISIJ INTERNATIONAL (2017)
Comparative numerical analysis and optimization in downhole combustion chamber of thermal spallation drilling
Zehao Lyu et al.
APPLIED THERMAL ENGINEERING (2017)
Increasing the sustainability of steel production in the electric arc furnace by substituting fossil coal with biochar agglomerates
T. Demus et al.
IRONMAKING & STEELMAKING (2016)
CFD modeling of carbon combustion and electrode radiation in an electric arc furnace
Cemil Yigit et al.
APPLIED THERMAL ENGINEERING (2015)
Pyrolysis and Combustion Kinetics of Raw and Carbonized Cottonwood and Switchgrass Agroforests
Sammy Sadaka et al.
BioResources (2015)
Effects of Particle Shrinkage and Devolatilization Models on High-Temperature Biomass Pyrolysis and Gasification
Xiaoke Ku et al.
ENERGY & FUELS (2015)
Chars from agricultural wastes as greener fuels for electric arc furnaces
B. Fidalgo et al.
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2015)
Development of Low-Emission Integrated Steelmaking Process
Sharif Jahanshahi et al.
JOURNAL OF SUSTAINABLE METALLURGY (2015)
THE SIMULATION OF BIOGAS COMBUSTION IN A MILD BURNER
M. M. Noor et al.
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES (2014)
Computational Fluid Dynamics Modeling on the Air-Firing and Oxy-fuel Combustion of Dried Victorian Brown Coal
Jian Zhang et al.
ENERGY & FUELS (2013)
Kinetic models for the oxy-fuel combustion of coal and coal/biomass blend chars obtained in N2 and CO2 atmospheres
M. V. Gil et al.
ENERGY (2012)
Recycling Agricultural Waste from Palm Shells during Electric Arc Furnace Steelmaking
Nur Farhana M. Yunos et al.
ENERGY & FUELS (2012)
Biomass as a Source of Renewable Carbon for Iron and Steelmaking
Terry Norgate et al.
ISIJ INTERNATIONAL (2012)
Validation of an effervescent spray model with secondary atomization and its application to modeling of a large-scale furnace
Jakub Broukal et al.
APPLIED THERMAL ENGINEERING (2011)
Structural Transformation of Agricultural Waste/Coke Blends and Their Implications during High Temperature Processes
Nur Farhana Mohd Yunos et al.
ISIJ INTERNATIONAL (2011)
Process Modeling and Optimization of a Submerged Arc Furnace for Phosphorus Production
Emile Scheepers et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2010)
Modelling the combustion of pulverized biomass in an industrial combustion test furnace
L. Ma et al.
FUEL (2007)
Smelting reduction reactions by solid carbon using induction furnace:: foaming behaviour and kinetics of FeO reduction in CaO-SiO2-FeO slag
B. Bhoi et al.
IRONMAKING & STEELMAKING (2006)
Computational fluid-dynamics simulation of postcombustion in the electric-arc furnace
Y Li et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2003)
分享论文
