☆ 4.6 Article

Effect of the incorporation of NaOH-treated wood aggregates on thermal and mechanical properties of plaster mortar

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Valorization of Posidonia-Oceanica leaves for the building insulation sector

Insaf Mehrez et al.

Summary: A new bio-composite material made from Posidonia-Oceanica leaves is proposed for building thermal insulation. Results show that the fiber loading has a significant impact on the mechanical and thermal characteristics, and alkali treatment can improve the compressive and flexural strength of the bio-composites. The proposed bio-composite has low thermal conductivity and acceptable mechanical performances, making it a suitable option for thermal insulation material.

JOURNAL OF COMPOSITE MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Thermal insulation potential of wood-cereal straws/plaster composite

Insaf Mehrez et al.

Summary: This study investigates the use of low-cost natural fibers (wood fiber and straw fiber) loaded in plaster for thermal insulation applications in buildings. The results show that this composite material can reduce thermal conductivity and thermal capacity while also reducing the weight of the material.

CASE STUDIES IN CONSTRUCTION MATERIALS (2022)

添加到收藏夹

Article Construction & Building Technology

Preparation and characterization of expanded perlite/wood-magnesium composites as building insulation materials

Yunfei Lin et al.

Summary: A novel thermal insulation composite composed of expanded perlite (EP)/wood-magnesium (EPWMC) was prepared to improve strength and water resistance, reduce thickness swelling, and broaden the scope of use in wet conditions. The composites also exhibited excellent flame retardant and smoke suppression properties, making them ideal building insulation materials for exterior or interior walls.

ENERGY AND BUILDINGS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Utilization of decayed wood for polyvinyl chloride/wood flour composites

Shengbo Ge et al.

Summary: The study found that decayed wood plastic composites with chitosan exhibited better properties than decayed wood plastic composites without any additive, and even better than sound wood plastic composites. Adding chitosan to decayed wood powder and PVC improved the performance of the DWPC, reaching the level of sound wood plastic composites. This work proposed a novel green strategy for utilizing decayed wood for making polyvinyl chloride/wood flour composites.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Construction & Building Technology

Effect of forced convection on the hygrothermal performance of a wood frame wall with wood fibre insulation

Nora Schjoth Bunkholt et al.

Summary: This study investigates the moisture conditions in wood-frame walls with wood fibre thermal insulation, finding that wood fibre insulation has the benefit of distributing and absorbing moisture, while the use of an exterior air barrier with high thermal resistance can reduce moisture levels in the wall construction, thus reducing the risk of mold growth.

BUILDING AND ENVIRONMENT (2021)

添加到收藏夹

Article Materials Science, Composites

Wood/polyimide composite via a rapid substitution compositing method for extreme temperature conditions

Ku Ren et al.

Summary: This study successfully synthesized a wood/polyimide composite with superior performance compared to natural wood by utilizing microwave-assisted deep eutectic solvent pretreatment and polyimide impregnation. The composite exhibited enhanced thermal stability, strength, and flame-retardant properties, making it a promising material for applications in extreme environments.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Construction & Building Technology

Mechanical properties of lightweight gypsum composites comprised of seagrass Posidonia oceanica and pine (Pinus sylvestris) wood fibers

Aldi Kuqo et al.

Summary: The addition of 1 to 6 wt% fibers can decrease the density of gypsum plaster while improving flexural and compression strength. Different fibers have varying effects on mechanical properties and impact resistance.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Wood-reinforced composites by stereolithography with the stress whitening behavior

Shuyang Zhang et al.

Summary: In this study, poplar wood flour at different concentrations was incorporated into a methacrylate-based resin via solution blending to fabricate wood-reinforced composites using SLA 3D printing. The addition of wood flour improved the tensile strength and Young's modulus of the printed composites, while causing stress whitening during uniaxial drawing. This research demonstrates the potential of using wood flour in SLA 3D printed WPC to reinforce products with a modest loading amount.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article

Mechanical and microstructural evaluation of aluminium matrix composite reinforced with wood particles

Peter Omoniyi et al.

Journal of King Saud University, Engineering Sciences (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Analysis on mechanical properties of wood plastic composite

K. Bhaskar et al.

Summary: Wood-plastic composites (WPC) are composites made by blending wood particles/flour with polymers, with mechanical properties depending on matrix, reinforcements, coupling agents, and lubricants. The project studies the physical properties of WPC by varying polymer blend proportions.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Effect of functional mineral additive on processability and material properties of wood-fiber reinforced poly(lactic acid) (PLA) composites

T. Ozyhar et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

添加到收藏夹

Review Materials Science, Characterization & Testing

A state-of-the-art review on particulate wood polymer composites: Processing, properties and applications

Mohammad Z. R. Khan et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Materials Science, Composites

Production of sustainable wood-plastic composites from the nonmetals in waste printed circuit boards: Excellent physical performance achieved by solid-state shear milling

Shuangqiao Yang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Construction & Building Technology

The recycling potential of wood waste into wood-wool/cement composite

F. Berger et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Polymer Science

Effects of mercerization in the chemical and morphological properties of amazon piassava

Viviane Rebelo et al.

POLIMEROS-CIENCIA E TECNOLOGIA (2019)

添加到收藏夹

Review Automation & Control Systems

A review of important considerations in the compression molding process of short natural fiber composites

Jamiluddin Jaafar et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental study of high-performance autoclaved aerated concrete produced with recycled wood fibre and rubber powder

Tingshu He et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Eco-efficient acoustic and thermal conditioning using false ceiling plates made from plaster and wood waste

M. A. Pedreno-Rojas et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Article Construction & Building Technology

Effect of wet blue chrome shaving and buffing dust of leather industry on the thermal conductivity of cement and plaster based materials

H. Lakrafli et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

添加到收藏夹

Article Agricultural Engineering

Morphological and crystalline characterization of NaOH and NaOCl treated Agave americana L. fiber

Asma El Oudiani Ben Sghaier et al.

INDUSTRIAL CROPS AND PRODUCTS (2012)

添加到收藏夹

Article Chemistry, Applied

Crystal transition from cellulose I to cellulose II in NaOH treated Agave americana L. fibre

A. El Oudiani et al.

CARBOHYDRATE POLYMERS (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effect of chemical treatments of wood fibers on the physical strength of polypropylene based composites

Jae Gyoung Gwon et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2010)

添加到收藏夹

Article Materials Science, Composites

Moisture Absorption Behavior of Wood/Plastic Composites Made with Ultrasound-Assisted Alkali-Treated Wood Particulates

Wei-Ping Chang et al.

COMPOSITE INTERFACES (2009)

添加到收藏夹

Article Acoustics

Transmission of sonic booms into a rectangular room with a plaster-wood wall using a modal - Interaction model

Marcel C. Remillieux et al.

JOURNAL OF SOUND AND VIBRATION (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tensile behaviours of the coir fibre and related composites after NaOH treatment

Huang Gu

MATERIALS & DESIGN (2009)

添加到收藏夹

Article Materials Science, Composites

Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites

M Jacob et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2004)

添加到收藏夹

Article Materials Science, Composites

Effect of the defect concentration on the impact fatigue endurance of untreated and alkali treated Jute-vinylester composites under normal and liquid nitrogen atmosphere

BK Sarkar et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2004)

添加到收藏夹

Article Materials Science, Composites

Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites

S Mishra et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Article Materials Science, Composites

Influence of processing and chemical treatment of flax fibres on their composites

I Van de Weyenberg et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.