Critical insights into anaerobic co-digestion of wheat straw with food waste and cattle manure: Synergistic effects on biogas yield and kinetic modeling

In this study, four batch assays were performed to ensure the synergic effects of co-digestion and find out the best inoculums to substrate ratio (ISR), carbon to nitrogen ratio (C:N), and total solid (TS) percentage in sequence. The co-digestion of three feedstocks had a 20% higher biogas yield (416 mL/gVS added) than mono-digestion with 21% volatile solids (VS) degradation. The ISR of 2 leads to the highest biogas yield (431 mL/gVS added) and VS removal (30.3%) over other ISRs (0.5, 1.0, 2.5) studied. The lower ISR (<2) tended to have lower pH due to insufficient anaerobes inside the digester. The C:N 35 (with ISR 2) yielded 17.4% higher biogas (443.5 mL/gVS added) than mono-digestion and was the highest among the C:N ratios studied with 36.6% VS removal. The VFA, alkalinity, and pH in C:N 35 assay were more stable than in other C:N assays. In the fourth batch assay, varying TS% (5, 7.5, 10, 12.5) were used with optimized ISR (2) and C:N (35). Higher TS% (10 and 12.5) had some lag phase but later achieved higher biogas production. The 12.5% TS assay achieved 80% higher biogas yield (679 mL/gVS added) over mono-digestion, i.e., highest among the TS% studied, with 48% VS removal. In conclusion, co-digestion of mixed feedstocks with ISR 2, C:N 35, and TS 12.5% could degrade almost half of the substrate available for biodegradation. Further biodegradation may require pretreatment of the recalcitrant WS. Modified Gompertz, first-order, transference, and logistic models were used for kinetic study and curve fitting of experimental data. For the optimized batch assays, the estimated specific rate constants were 0.08, 0.12, 0.083, and 0.084. The data fits well in all the models, with the coefficient of discrimination (R2) ranging from 0.882 to 0.999.

Automated summary

The co-digestion of three feedstocks resulted in a 20% higher biogas yield compared to mono-digestion. An inoculum to substrate ratio (ISR) of 2, a carbon to nitrogen ratio (C:N) of 35, and a total solid (TS) percentage of 12.5% were found to be optimal.