相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Numerical Investigation of Tapered Flow Field Configurations for Enhanced Polymer Electrolyte Membrane Fuel Cell Performance
Yulin Wang et al.
APPLIED ENERGY (2022)
Numerical simulation and visualization study of a new tapered-slope serpentine flow field in proton exchange membrane fuel cell
Haozhong Huang et al.
ENERGY (2022)
Modeling, design, materials and fabrication of bipolar plates for proton exchange membrane fuel cell: A review
Kangning Xiong et al.
APPLIED ENERGY (2021)
The effect of cathode channel blockages on the enhanced mass transfer and performance of PEMFC
Yonghua Cai et al.
ENERGY (2021)
Experimental investigation and optimization of proton exchange membrane fuel cell using different flow fields
Aezid-Ul-Hassan Najmi et al.
ENERGY (2021)
Improved energy performance of a PEM fuel cell by introducing discontinuous S-shaped and crescent ribs into flowing channels
Pengcheng Dong et al.
ENERGY (2021)
Performance study on a stepped flow field design for bipolar plate in PEMFC
Xi Chen et al.
ENERGY REPORTS (2021)
Biomimetic flow fields for proton exchange membrane fuel cells: A review of design trends
A. Iranzo et al.
ENERGY (2020)
Design and optimization of bio-inspired wave-like channel for a PEM fuel cell applying genetic algorithm
Genchun Cai et al.
ENERGY (2020)
Numerical analysis of global and local performance variations of proton exchange membrane fuel cell with different bend layouts and flow directions
Xian-Wen Zhang et al.
ENERGY (2020)
Computational fluid dynamics study of 3-pass serpentine flow field configuration on proton exchange membrane fuel cell performance
Venkateswarlu Velisala et al.
INTERNATIONAL JOURNAL OF AMBIENT ENERGY (2020)
A numerical investigation of the performance of Polymer Electrolyte Membrane fuel cell with the converging-diverging flow field using two-phase flow modeling
P. Havaej
ENERGY (2019)
Numerical investigation of obstacle's effect on the performance of proton-exchange membrane fuel cell: studying the shape of obstacles
A. A. Ebrahimzadeh et al.
HELIYON (2019)
An investigation into the effect of manifold geometry on uniformity of temperature distribution in a PEMFC stack
Amir Amirfazli et al.
ENERGY (2018)
An investigation of the PEM fuel cells performance with partially restricted cathode flow channels and metal foam as a flow distributor
E. Afshari et al.
ENERGY (2017)
Effect of flow field with converging and diverging channels on proton exchange membrane fuel cell performance
Navid Zehtabiyan-Rezaie et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Novel convergent-divergent serpentine flow fields effect on PEM fuel cell performance
Mohammad Ziauddin Chowdhury et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Numerical analysis of modified parallel flow field designs for fuel cells
B. H. Lim et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Enhanced gas flow uniformity across parallel channel cathode flow field of Proton Exchange Membrane fuel cells
Mohammad Sajid Hossain et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Evaluation and analysis of internal flow field uniformity in grain stack based on multi zone model of porous media
Hao Zhang et al.
10TH INTERNATIONAL SYMPOSIUM ON HEATING, VENTILATION AND AIR CONDITIONING, ISHVAC2017 (2017)
Application of computational fluid dynamics to the analysis of geometrical features in PEM fuel cells flow fields with the aid of impedance spectroscopy
Andrea Baricci et al.
APPLIED ENERGY (2017)
1D+3D two-phase flow numerical model of a proton exchange membrane fuel cell
Rui B. Ferreira et al.
APPLIED ENERGY (2017)
Numerical investigation on a novel zigzag-shaped flow channel design for cooling plates of PEM fuel cells
Ebrahim Afshari et al.
JOURNAL OF THE ENERGY INSTITUTE (2017)
A review on water fault diagnosis of PEMFC associated with the pressure drop
Pucheng Pei et al.
APPLIED ENERGY (2016)
An experimental and simulation study of novel channel designs for open-cathode high-temperature polymer electrolyte membrane fuel cells
Sobi Thomas et al.
APPLIED ENERGY (2016)
Multidisciplinary approaches to metallic bipolar plate design with bypass flow fields through deformable gas diffusion media of polymer electrolyte fuel cells
Ah-Reum Kim et al.
ENERGY (2016)
Comparison of the performance and EIS (electrochemical impedance spectroscopy) response of an activated PEMFC (proton exchange membrane fuel cell) under low and high thermal and pressure stresses
Mohammad Zhiani et al.
ENERGY (2016)
A numerical investigation of serpentine flow channel with different bend sizes in polymer electrolyte membrane fuel cells
Leila Rostami et al.
ENERGY (2016)
Influences of bipolar plate channel blockages on PEM fuel cell performances
Hadi Heidary et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Protective coatings on stainless steel bipolar plates for proton exchange membrane (PEM) electrolysers
A. S. Gago et al.
JOURNAL OF POWER SOURCES (2016)
High performance polymeric bipolar plate based on polypropylene/graphite/graphene/nano-carbon black composites for PEM fuel cells
Ali Adloo et al.
RENEWABLE ENERGY (2016)
A three-dimensional numerical investigation of trapezoid baffles effect on non-isothermal reactant transport and cell net power in a PEMFC
Shiang-Wuu Perng et al.
APPLIED ENERGY (2015)
The effects of channel depth on the performance of miniature proton exchange membrane fuel cells with serpentine-type flow fields
Dyi-Huey Chang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Optimization of Parallel and Serpentine Configurations for Polymer Electrolyte Membrane Fuel Cells
N. Guo et al.
FUEL CELLS (2014)
Optimal design and operational tests of a high-temperature PEM fuel cell for a combined heat and power unit
Felix Barreras et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
Proton exchange membrane fuel cell modeling with diffusion layer-based and sands-based capillary pressure correlations: Comparative study
Xiao-Dong Wang et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2014)
Numerical investigation of the coupled water and thermal management in PEM fuel cell
Tao-Feng Cao et al.
APPLIED ENERGY (2013)
Non-equilibrium two-phase model of the air-cathode of a PEM fuel cell based on GDL experimental water transport characteristics
Bladimir Ramos-Alvarado et al.
JOURNAL OF POWER SOURCES (2013)
A three-dimensional modeling of transport phenomena of proton exchange membrane fuel cells with various flow fields
Han-Chieh Chiu et al.
APPLIED ENERGY (2012)
Water droplet accumulation and motion in PEM (Proton Exchange Membrane) fuel cell mini-channels
J. G. Carton et al.
ENERGY (2012)
Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review
A. P. Manso et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Three-dimensional numerical analysis of proton exchange membrane fuel cell
Nader Pourmahmoud et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2011)
Numerical investigations on liquid water removal from the porous gas diffusion layer by reactant flow
Jae Wan Park et al.
APPLIED ENERGY (2010)
An inverse geometry design problem for optimization of single serpentine flow field of PEM fuel cell
Xiao-Dong Wang et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Numerical model for the performance prediction of a PEM fuel cell. Model results and experimental validation
Alfredo Iranzo et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Water dynamics in nafion fuel cell membranes: The effects of confinement and structural changes on the hydrogen bond network
David E. Moilanen et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2007)
On the effectiveness of Leverett approach for describing the water transport in fuel cell diffusion media
E. C. Kumbur et al.
JOURNAL OF POWER SOURCES (2007)
Ex situ visualization of liquid water transport in PEM fuel cell gas diffusion layers
S Litster et al.
JOURNAL OF POWER SOURCES (2006)
Review of bipolar plates in PEM fuel cells: Flow-field designs
XG Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2005)