4.5 Review

Adsorbent Coatings for Adsorption Heat Transformation: From Synthesis to Application

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Adsorption heat conversion and storage in closed systems: What have we learned over the past decade of this century?

Yu. I. Aristov

Summary: This review article addresses recent results and current trends in adsorption heat conversion/storage in closed systems. It focuses on the development of new adsorbents and cycles, improvement of adsorption dynamics, and other topical issues, aiming to highlight the current progress, research trends, and existing gaps in the technology involved.

ENERGY (2022)

Article Thermodynamics

Thermal performance improvement of AHP using corrugated heat exchanger by dip-coating method with mass recovery

Fang He et al.

Summary: This study focuses on enhancing the cooling performance of adsorption heat pumps. A filling method called dip-coating method is introduced to improve the heat transfer and packing density of the corrugated heat exchanger (HEX). The experimental results show that the dip-coating method can effectively enhance the COP and SCP of the heat pump cooling system.

ENERGY (2022)

Article Engineering, Environmental

Experimental study of 3D-structured adsorbent composites with improved heat and mass transfer for adsorption heat pumps

Marc Scherle et al.

Summary: The optimal balance of heat transfer, mass transfer, and adsorption capacity is crucial for improving the performance of adsorption heat pumps. In this study, 3D-structuring of adsorbent composites was used to reduce heat and mass transfer resistance and enhance the performance of adsorption heat pumps. The introduction of thermally conductive aluminum ribs and mass transfer channels intensified heat and mass transfer kinetics without significantly reducing volumetric adsorption capacity. Experimental results revealed a 5% performance improvement after introducing mass transfer channels, a 42% improvement upon addition of 3D-printed aluminum ribs, and an 85% improvement when both channels and ribs were applied compared to non-structured composites.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Green & Sustainable Science & Technology

Facile synthesis of Al-based MOF and its applications in desiccant coated heat exchangers

Lurong Ge et al.

Summary: This study investigates the application of Metal-Organic Frameworks (MOFs) in desiccant coated heat exchangers (DCHEs) and finds that Al-based MOFs exhibit high adsorption capacity and moderate regeneration temperature. Experimental results show that MOF coated heat exchangers have excellent dehumidification performance and cycling stability, with the dehumidification capacity being 2-3 times higher than that of traditional silica gel coated heat exchangers under most test conditions. This research provides a reference for the design of MOF-based dehumidification systems.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Article Energy & Fuels

An Industrial Approach for the Optimization of a New Performing Coated Adsorber for Adsorption Heat Pumps

Luigi Calabrese et al.

Summary: This study investigates the optimization of a new coating formulation using an industrially focused research approach for adsorbent design. A new compact heat exchanger design was developed, and its performance was tested in a laboratory under realistic conditions.

ENERGIES (2022)

Article Chemistry, Physical

Adsorption of Non-Steroidal Anti-Inflammatory Drugs on Alginate-Carbon Composites-Equilibrium and Kinetics

Malgorzata Wasilewska et al.

Summary: In this study, alginate-carbon composites with different active carbon content were synthesized and analyzed by various techniques. The obtained materials show potential as adsorbents for removing organic pollutants from water. The immobilization effect of activated carbon in calcium alginate was investigated, and the textural properties, morphology, and adsorption properties of the materials were studied.

MATERIALS (2022)

Article Thermodynamics

Experimental testing of wire finned heat exchanger coated with aluminium fumarate MOF material for adsorption desalination application

Majdi M. Saleh et al.

Summary: This study investigates the performance of a coated wire wound finned tube heat exchanger using aluminium fumarate as a new adsorbent material. Results show that the coated heat exchanger outperforms the packed heat exchanger in adsorption cooling and desalination applications.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2022)

Article Chemistry, Multidisciplinary

Producing cold from heat with aluminum carboxylate-based metal-organic frameworks

Effrosyni Gkaniatsou et al.

Summary: As worldwide cooling energy demands continue to rise, thermally driven cooling technology provides an alternative solution to electric heat pumps. By utilizing water-stable microporous aluminum-carboxylate-based metal-organic frameworks (Al-MOFs) as sorbents, high thermal efficiency and specific cooling power can be achieved in typical cooling scenarios.

CELL REPORTS PHYSICAL SCIENCE (2022)

Review Thermodynamics

Desiccant coated heat exchanger and its applications

L. H. Zhao et al.

Summary: This paper provides an overview of the fundamental knowledge and research progress on desiccant coated heat exchangers (DCHE) for dehumidification and cooling. It compares different dehumidification processes and operation modes of DCHE, analyzes its performance, and discusses its potential applications in various fields. Further research is needed to optimize the performance of DCHE through desiccant coating selection and heat exchanger structure design.

INTERNATIONAL JOURNAL OF REFRIGERATION (2021)

Review Green & Sustainable Science & Technology

Adsorption heat pumps for heating applications

Joana M. Pinheiro et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Article Energy & Fuels

Experimentally Measured Thermal Masses of Adsorption Heat Exchangers

Kyle R. Gluesenkamp et al.

ENERGIES (2020)

Article Thermodynamics

Lab-scale sorption chiller comparison of FAM-Z02 coating and pellets

C. McCague et al.

APPLIED THERMAL ENGINEERING (2020)

Article Energy & Fuels

Advanced Adsorbent Materials for Waste Energy Recovery

Lucio Bonaccorsi et al.

ENERGIES (2020)

Review Materials Science, Multidisciplinary

Recent Developments in Coating Technologies for Adsorption Heat Pumps: A Review

Angela Capri et al.

COATINGS (2020)

Article Thermodynamics

Synthesis and characterization of silica gel composite with polymer binders for adsorption cooling applications

Mohamed M. Younes et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2019)

Article Thermodynamics

Characterization of transport limitations in SAPO-34 adsorbent coatings for adsorption heat pumps

Jens Ammann et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Article Thermodynamics

Sorption rate enhancement in SAPO-34 zeolite by directed mass transfer channels

Jens Ammann et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Article Energy & Fuels

Water adsorption equilibrium and dynamics of LICL/MWCNT/PVA composite for adsorptive heat storage

Vincenza Brancato et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Article Nanoscience & Nanotechnology

High-Power Adsorption Heat Pumps Using Magnetically Aligned Zeolite Structures

Jens Ammann et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Thermodynamics

Adsorptive heat storage and amplification: New cycles and adsorbents

L. G. Gordeeva et al.

ENERGY (2019)

Article Thermodynamics

Effective thermal conductivity of packed bed adsorbers: Part 1-Experimental study

Mina Rouhani et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Energy & Fuels

Composite LiCl/MWCNT as advanced water sorbent for thermal energy storage: Sorption dynamics

Alexandra D. Grekova et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Article Thermodynamics

MOF-801 as a promising material for adsorption cooling: Equilibrium and dynamics of water adsorption

M. V. Solovyeva et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Article Multidisciplinary Sciences

Metal-Organic Frameworks as advanced moisture sorbents for energy-efficient high temperature cooling

Shuqing Cui et al.

SCIENTIFIC REPORTS (2018)

Article Engineering, Chemical

A Functional Full-Scale Heat Exchanger Coated with Aluminum Fumarate Metal-Organic Framework for Adsorption Heat Transformation

Harry Kummer et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

Article Thermodynamics

Insights from modeling dynamics of water sorption in spherical particles for adsorption heat pumps

A. I. Radu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Article Thermodynamics

Dynamic optimization of adsorptive chillers: Compact layer vs. bed of loose grains

I. S. Girnik et al.

APPLIED THERMAL ENGINEERING (2017)

Article Engineering, Environmental

Ionic liquid as a new binder for activated carbon based consolidated composite adsorbents

Animesh Pal et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Article Thermodynamics

Consolidated adsorbent containing graphite flakes for heat-driven water sorption cooling systems

Khorshid Fayazmanesh et al.

APPLIED THERMAL ENGINEERING (2017)

Article Green & Sustainable Science & Technology

Silicone composite foams for adsorption heat pump applications

L. Calabrese et al.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2017)

Review Green & Sustainable Science & Technology

Adsorptive transformation and storage of renewable heat: Review of current trends in adsorption dynamics

Yuri I. Aristov

RENEWABLE ENERGY (2017)

Article Green & Sustainable Science & Technology

A novel adsorption module with fiber heat exchangers: Performance analysis based on driving temperature differences

Ursula Wittstadt et al.

RENEWABLE ENERGY (2017)

Article Thermodynamics

Thermally driven refrigeration by methanol adsorption on coatings of HKUST-1 and MIL-101(Cr)

Harry Kummer et al.

APPLIED THERMAL ENGINEERING (2017)

Article Thermodynamics

Effect of improving thermal conductivity of the adsorbent on performance of adsorption cooling system

Ahmed A. Askalany et al.

APPLIED THERMAL ENGINEERING (2017)

Article Thermodynamics

A study on consolidated composite adsorbents for cooling application

Ibrahim I. El-Sharkawy et al.

APPLIED THERMAL ENGINEERING (2016)

Article Thermodynamics

Dynamics study of ethanol adsorption on microporous activated carbon for adsorptive cooling applications

Vincenza Brancato et al.

APPLIED THERMAL ENGINEERING (2016)

Article Thermodynamics

Performance of adsorbent-embedded heat exchangers using binder-coating method

Ang Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Article Thermodynamics

SAPO-34 coated adsorbent heat exchanger for adsorption chillers

Angelo Freni et al.

APPLIED THERMAL ENGINEERING (2015)

Article Thermodynamics

Experimental study on silica gel-LiCl composite desiccants for desiccant coated heat exchanger

X. Zheng et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2015)

Article Thermodynamics

Zeolites direct synthesis on heat exchangers for adsorption heat pumps

Lucio Bonaccorsi et al.

APPLIED THERMAL ENGINEERING (2013)

Article Thermodynamics

Synthesis of SAPO-34 on graphite foams for adsorber heat exchangers

Lucio Bonaccorsi et al.

APPLIED THERMAL ENGINEERING (2013)

Article Computer Science, Interdisciplinary Applications

Systematic mesh development for 3D CFD simulation of fixed beds: Contact points study

Anthony G. Dixon et al.

COMPUTERS & CHEMICAL ENGINEERING (2013)

Article Thermodynamics

Measurement of thermal conductivity and heat pipe effect in hydrophilic and hydrophobic carbon papers

Yun Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)

Article Chemistry, Applied

Hydrothermal and microwave synthesis of SAPO (CHA) zeolites on aluminium foams for heat pumping applications

Lucio Bonaccorsi et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2013)

Article Chemistry, Multidisciplinary

High performance metal-organic-framework coatings obtained via thermal gradient synthesis

Felix Jeremias et al.

CHEMICAL COMMUNICATIONS (2012)

Article Thermodynamics

Anisotropic thermal conductivity and permeability of compacted expanded natural graphite

L. W. Wang et al.

APPLIED THERMAL ENGINEERING (2010)

Article Thermodynamics

The use of metal piece additives to enhance heat transfer rate through an unconsolidated adsorbent bed

Hasan Demir et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2010)

Article Chemistry, Applied

A compact layer of alumina modified by CaCl2: The influence of composition and porous structure on water transport

Ivan S. Glaznev et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2010)

Article Thermodynamics

Kinetics of water adsorption in microporous aluminophosphate layers for regenerative heat exchangers

Hendrik van Heyden et al.

APPLIED THERMAL ENGINEERING (2009)

Article Materials Science, Multidisciplinary

Influence of concentration of pore forming agent on porosity of SiO2 ceramic from rice husk ash

N. R. A. Manap et al.

MATERIALS RESEARCH INNOVATIONS (2009)

Article Thermodynamics

Micro and miniature heat pipes - Electronic component coolers

L. L. Vasiliev

APPLIED THERMAL ENGINEERING (2008)

Article Thermodynamics

An advanced solid sorption chiller using SWS-1Ll

A. Freni et al.

APPLIED THERMAL ENGINEERING (2007)

Article Thermodynamics

Non-isothermal adsorption kinetics of water vapour into a consolidated zeolite layer

B. Dawoud et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

Article Materials Science, Ceramics

Porosity and pore size control in starch consolidation casting of oxide ceramics - Achievements and problems

Eva Gregorova et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)

Article Materials Science, Ceramics

Preparation of macroporous alumina ceramics using wheat particles as gelling and pore forming agent

K. Prabhakaran et al.

CERAMICS INTERNATIONAL (2007)

Article Chemistry, Applied

Zeolite coated copper foams for heat pumping applications

L Bonaccorsi et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2006)

Article Chemistry, Applied

Synthesis of thick zeolite 4A coatings on stainless steel

L Bonaccorsi et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2004)

Article Thermodynamics

Effects of metal mass on the performance of adsorption heat pumps utilizing zeolite 4A coatings synthesized on heat exchanger tubes

M Tatlier et al.

INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2000)