4.5 Article

A Numerical Study on Heat Transfer Characteristics of a Novel Rectangular Grooved Microchannel with Al2O3/Water Nanofluids

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Effects of regular triangular prisms on thermal and hydraulic characteristics in a minichannel heat sink

Zhen Chen et al.

Summary: This study investigates the effects of triangular prisms on thermal and hydraulic characteristics in micro/mini-channel heat sinks. The results show that heat sinks with backward triangular prisms perform the best in terms of heating wall temperature uniformity, Nusselt number, and friction coefficient. These findings are important for improving the cooling efficiency of high heat flux devices.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Article Thermodynamics

Influence of transient heat flux on boiling flow pattern in a straight microchannel applied in concentrator photovoltaic systems

Hao Yu et al.

Summary: The transient flow and phase change phenomenon in a microchannel with deionized water were studied, and it was found that different heat flux increases led to different flow pattern evolutions, with higher heat flux increases having a deeper impact on phase change.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Article Physics, Multidisciplinary

Exploring the impact of magnetic dipole on the radiative nanofluid flow over a stretching sheet by means of KKL model

Manish Anand

Summary: This study focuses on the rheological properties of nanofluids using the Koo-Kleinstreuer-Li model. The numerical results show that increasing the radiation parameter improves the thermal profile, while increasing the Biot number enhances the thermal boundary layer region. Additionally, an increase in the space-dependent internal heat sink/source parameter deteriorates the rate of heat transfer.

PRAMANA-JOURNAL OF PHYSICS (2021)

Article Engineering, Chemical

Impact of Binary Chemical Reaction and Activation Energy on Heat and Mass Transfer of Marangoni Driven Boundary Layer Flow of a Non-Newtonian Nanofluid

Ramanahalli Jayadevamurthy Punith Gowda et al.

Summary: Studied the steady Marangoni driven boundary layer flow, heat and mass transfer characteristics of a nanofluid, results showed that increasing Marangoni number improves velocity gradient and reduces heat transfer, while increasing porosity parameter reduces velocity gradient and improves heat transfer, Nusselt number decreases as porosity parameter increases.

PROCESSES (2021)

Article Thermodynamics

Inspection of convective heat transfer and KKL correlation for simulation of nanofluid flow over a curved stretching sheet

R. Naveen Kumar et al.

Summary: The study focuses on the flow of nanofluid over a curved stretching sheet, discussing heat and mass transfer, activation energy, and the use of CuO with waterbased nanofluid in the model. By utilizing the Koo-Kleinstreuer-Li (KKL) model, the viscosity and effective thermal conductivity of the fluid suspended by nanoparticles are examined. The results reveal the impact of non-dimensional parameters on thermal gradient and mass transfer in the nanofluid flow.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Article Mathematics, Applied

Exploration of Arrhenius activation energy on hybrid nanofluid flow over a curved stretchable surface

R. S. Varun Kumar et al.

Summary: Heat transfer is crucial for the success of multi-scale production, with thermal properties achieved through continuous phase liquids. Increasing the values of Biot number and heat source/sink parameter can improve thermal gradient. Hybrid nanofluid demonstrates higher heat transfer rate compared to nanoliquid for improved values of heat source/sink parameter.

ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK (2021)

Article Nanoscience & Nanotechnology

Magnetized flow of sutterby nanofluid through cattaneo-christov theory of heat diffusion and stefan blowing condition

R. J. Punith Gowda et al.

Summary: In this research, the Stefan blowing phenomenon in electrically conducting Sutterby material flow over a stretchable rotating disk is demonstrated. The CC model and Buongiorno model are adopted to analyze energy diffusion and evaluate the involvement of nanoparticles. The re-structured system of partial differential expressions is solved using RKF process to communicate the solution of velocity, thermal and solutal fields, with results showing the influence of Stefan blowing factor on velocity gradients and nanomaterial speed, as well as the impact of magnetic parameter values on liquid velocity and temperature.

APPLIED NANOSCIENCE (2021)

Article Multidisciplinary Sciences

Two-phase flow of dusty fluid with suspended hybrid nanoparticles over a stretching cylinder with modified Fourier heat flux

R. S. Varun Kumar et al.

Summary: This study examines the influence of hybrid nanoparticles on dusty liquid flow through a stretching cylinder using the modified Fourier heat flux law and a two-phase model. The results indicate that an increase in particle mass concentration leads to a decrease in velocity and thermal gradient, while an increase in the curvature parameter enhances velocity and thermal gradient within the boundary. The use of appropriate similarity variables allows for the numerical solution of the nonlinear ODEs through the Runge-Kutta-Fehlberg method.

SN APPLIED SCIENCES (2021)

Article Thermodynamics

Study on the flow and heat dissipation of water-based alumina nanofluids in microchannels

Chunquan Li et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

Article Thermodynamics

Numerical investigation of laminar convective heat transfer and pressure drop of water-based Al2O3 nanofluids in a microchannel

Xiaojun Shi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2018)

Article Thermodynamics

Thermal conductivity and viscosity models of metallic oxides nanofluids

Omer A. Alawi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Article Thermodynamics

Effects of different geometric structures on fluid flow and heat transfer performance in microchannel heat sinks

G. D. Xia et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Article Thermodynamics

CFD modeling (comparing single and two-phase approaches) on thermal performance of Al2o3/water nanofluid in mini-channel heat sink

Mostafa Keshavarz Moraveji et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)

Article Mechanics

Two phase mixed convection Al2O3-water nanofluid flow in an annulus

R. Mokhtari Moghari et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2011)

Article Thermodynamics

Comparative analysis of single and two-phase models for CFD studies of nanofluid heat transfer

M. Akbari et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2011)

Article Chemistry, Multidisciplinary

Effect of nanofluids on thin film evaporation in microchannels

Jun-Jie Zhao et al.

JOURNAL OF NANOPARTICLE RESEARCH (2011)

Article Thermodynamics

Numerical study of convective heat transfer of nanofluids in a circular tube two-phase model versus single-phase model

M. Haghshenas Fard et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2010)

Article Thermodynamics

Laminar periodic flow and heat transfer in square channel with 45° inline baffles on two opposite walls

Pongjet Promvonge et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2010)

Article Thermodynamics

Three dimensional numerical analyses and optimization of offset strip-fin microchannel heat sinks

Fangjun Hong et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2009)

Article Thermodynamics

Heat transfer enhancement using Al2O3-water nanofluid for an electronic liquid cooling system

Cong Tam Nguyen et al.

APPLIED THERMAL ENGINEERING (2007)

Article Thermodynamics

Assessment of the effectiveness of nanofluids for single-phase and two-phase heat transfer in micro-channels

Jaeseon Lee et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)

Article Engineering, Electrical & Electronic

Numerical study of turbulent heat transfer and pressure drop characteristics in a water-cooled minichannel heat sink

X. L. Xie et al.

JOURNAL OF ELECTRONIC PACKAGING (2007)

Article Thermodynamics

Numerical investigation of nanofluid laminar convective heat transfer through a circular tube

S. Zeinali Heris et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2007)

Article Thermodynamics

Averaging approach for microchannel heat sinks subject to the uniform wall temperature condition

DK Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)

Article Thermodynamics

High flux heat removal with microchannels - A roadmap of challenges and opportunities

SG Kandlikar

HEAT TRANSFER ENGINEERING (2005)

Article Thermodynamics

Investigation of heat transfer in rectangular microchannels

PS Lee et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)

Article Chemistry, Multidisciplinary

A new thermal conductivity model for nanofluids

J Koo et al.

JOURNAL OF NANOPARTICLE RESEARCH (2004)

Article Thermodynamics

Size effect on single-phase channel flow and heat transfer at microscale

ZY Guo et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2003)