☆ 4.6 Article

Modeling the inhomogeneous lithium plating in lithium-ion batteries induced by non-uniform temperature distribution

ELECTROCHIMICA ACTA (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Dimensionless normalized concentration based thermal-electric regression model for the thermal runaway of lithium-ion batteries

Hang Wu et al.

Summary: This study develops a thermal-electric coupled TR model, using the electric quantity normalized concentration c(eq) to describe the numerical relationship between temperature and voltage, effectively fitting the temperature and voltage variation behavior in lithium-ion battery TR, proving that the changes in temperature and voltage can be mutually obtained through a stable numerical coupling relationship, and establishing the relationship between SOC and the concentration field.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Chemistry, Physical

Novel non-destructive detection methods of lithium plating in commercial lithium-ion batteries under dynamic discharging conditions

Yue Pan et al.

Summary: Lithium plating is a severe problem in lithium-ion batteries under low temperature and high charge rates, which can cause capacity fading and safety issues. This paper proposes two detection methods for lithium plating suitable for offline and online use, and verifies their effectiveness through experiments.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Energy & Fuels

Simulation of cooling plate effect on a battery module with different channel arrangement

Xinke Li et al.

Summary: This study evaluates the impact of layout and channel design of cooling plates on the heat dissipation of lithium-ion battery modules in electric vehicles. The design with two cooling plates sandwiching one battery module shows better cooling performance, and cooling plates with multiple small flow channels perform optimally at certain inlet flow rates.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Review Energy & Fuels

Critical review of life cycle assessment of lithium-ion batteries for electric vehicles: A lifespan perspective

Xin Lai et al.

Summary: This study reviews the framework and methods of life cycle assessment (LCA) and evaluates the entire lifespan of lithium-ion batteries (LIBs). The results show that battery production significantly impacts the environment and resources, while battery materials recycling and remanufacturing have considerable environmental and economic values. Moreover, greening of electricity is critical to reducing carbon emissions during the battery life cycle.

ETRANSPORTATION (2022)

添加到收藏夹

Article Electrochemistry

Concept Review of a Cloud-Based Smart Battery Management System for Lithium-Ion Batteries: Feasibility, Logistics, and Functionality

Manh-Kien Tran et al.

Summary: This article discusses the concept and design of cloud-based smart battery management systems (BMSs) and examines their functionality, usability, and benefits for future battery applications. Cloud-based smart BMSs can overcome the limitations of current BMSs in terms of computational capability and data storage, thus improving the reliability and overall performance of LIB systems.

BATTERIES-BASEL (2022)

添加到收藏夹

Article Energy & Fuels

Recent progress and perspectives on designing high-performance thick electrodes for all-solid-state lithium batteries

Xiaofei Yang et al.

Summary: Thick electrodes are crucial for high-performance all-solid-state lithium batteries, especially by designing continuous Li+/e(-) transport pathways and low-tortuosity structures. Additionally, interfacial engineering can improve the SSE/electrode material interface, while factors such as particle size, binder, crystal structure, and solvent influence the construction of Li+/e(-) transport pathways.

ETRANSPORTATION (2022)

添加到收藏夹

Article Chemistry, Physical

Investigating the relationship between internal short circuit and thermal runaway of lithium-ion batteries under thermal abuse condition

Dongsheng Ren et al.

Summary: Thermal runaway, a critical issue in the application of lithium-ion batteries, is a thermalelectrical coupled process where exothermic chemical reactions and internal short circuit coincide. This study investigates the relationship between internal short circuit and thermal runaway under thermal abuse conditions, finding the limited contribution of internal short circuit to thermal runaway. The results provide new insights into battery thermal runaway mechanism and safety design.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Mechanism, modeling, detection, and prevention of the internal short circuit in lithium-ion batteries: Recent advances and perspectives

Xin Lai et al.

Summary: This comprehensive review investigates the mechanism and evolutionary process of internal short circuit (ISC) within lithium-ion batteries (LIBs), covering types, inducing mechanisms, evolution stages, experimental methods, detection and diagnosis techniques, prevention methods, and future prospects. The study emphasizes the importance of improving safety in LIBs through advancements in modeling, simulation, detection, and prevention of ISC.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Mechanistic underpinnings of thermal gradient induced inhomogeneity in lithium plating

Conner Fear et al.

Summary: This study highlights the challenges of lithium plating and thermal inhomogeneity during rapid charging, emphasizing the impact of in-plane and inter-electrode thermal gradients on charging performance and cell degradation.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Engineering, Chemical

Investigation of Individual Cells Replacement Concept in Lithium-Ion Battery Packs with Analysis on Economic Feasibility and Pack Design Requirements

Manh-Kien Tran et al.

Summary: The paper focuses on optimizing the usage of Li-ion battery packs by proposing the concept of cell replacement and conducting simulation studies. Results indicate that the cell replacement method can effectively prolong the lifespan of the battery packs and be more economically beneficial compared to the current approach.

PROCESSES (2021)

添加到收藏夹

Article Energy & Fuels

Numerical investigation on thermal behaviour of 5 x 5 cell configured battery pack using phase change material and fin structure layout

V. G. Choudhari et al.

Summary: This study evaluates the thermal performance of lithium-ion battery modules using phase change material cooling and proposes different fin structure layouts to minimize internal heat accumulation. By investigating rest time, convection effect, and fin structure, it is possible to reduce maximum temperature, recover melting fraction, and optimize the thermal performance of the battery pack.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Review Energy & Fuels

Review of computational parameter estimation methods for electrochemical models

E. Miguel et al.

Summary: This paper reviews computational parameter estimation methods for rocking chair batteries electrochemical models, highlighting the importance of accurately estimating parameters for accurate predictions. The methods are classified into single optimization analysis and multiple optimization analysis, with non-invasive methods showing high accuracy and the potential of mixed methodologies to increase efficiency.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Detection of Lithiation and Lithium Plating in Graphite Anodes during Fast Charging

Alec S. Ho et al.

Summary: The research found that during fast charging, mossy lithium metal forms a layer between the graphite electrode and separator, causing some graphite particles to be underlithiated. This lithium plating layer inhibits further lithiation of the underlying electrode.

ACS NANO (2021)

添加到收藏夹

Article Automation & Control Systems

Global Parameter Sensitivity Analysis of Electrochemical Model for Lithium-Ion Batteries Considering Aging

Yizhao Gao et al.

Summary: The study found that the sensitivity of each parameter varies at different operating conditions, with resistance-related parameters being more sensitive than capacity and diffusion-related parameters. By clustering the 16 aging parameters, the identified model achieved low voltage root-mean-square errors.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2021)

添加到收藏夹

Article Energy & Fuels

Temperature and Lithium Concentration Gradient Caused Inhomogeneous Plating in Large-format Lithium-ion Cells

Mathias Storch et al.

Summary: This study reveals that the uneven distribution of lithium plating in large-format lithium-ion cells can distort the operating window, and accelerated testing may induce degradation mechanisms that are not typically observed during regular usage.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Chemistry, Physical

Operando video microscopy of Li plating and re-intercalation on graphite anodes during fast charging

Yuxin Chen et al.

Summary: This study used plan-view operando video microscopy to investigate lithium plating on graphite anodes in high-energy-density batteries. The results show that lithium plating mainly occurs on graphite particles and is correlated with local minimum of graphite electrode potential. Galvanic corrosion currents are responsible for lithium re-intercalation and dead lithium formation.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Directionality of thermal gradients in lithium-ion batteries dictates diverging degradation modes

Rachel Carter et al.

Summary: The intentional application of interelectrode thermal gradients (ITGs) accelerates capacity loss in 35°C cells, with the directionality of the thermal gradient determining the degradation mode. Experimental results showed that when the positive electrode is warmer than the negative electrode, the capacity loss is 77%, while when the negative electrode is warmer, the capacity loss is 100%.

CELL REPORTS PHYSICAL SCIENCE (2021)

添加到收藏夹

Review Energy & Fuels

Oxygen anionic redox activated high-energy cathodes: Status and prospects

Xu Zhang et al.

Summary: The oxygen anionic redox (OAR) has emerged as a new design paradigm to provide additional capacity for high-capacity cathodes, with Li-rich layered oxides (LLOs) being one of the most appealing candidates for future high-energy LIBs. Furthermore, the application of pure OAR can also trigger the emergence of lithium-based sealed batteries with great long-term potentials.

ETRANSPORTATION (2021)

添加到收藏夹

Article Chemistry, Physical

Detecting the Onset of Lithium Plating and Monitoring Fast Charging Performance with Voltage Relaxation

Zachary M. Konz et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Heterogeneous Behavior of Lithium Plating during Extreme Fast Charging

Tanvir R. Tanim et al.

CELL REPORTS PHYSICAL SCIENCE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Underpotential lithium plating on graphite anodes caused by temperature heterogeneity

Hansen Wang et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

添加到收藏夹

Article Energy & Fuels

Overcharge behaviors and failure mechanism of lithium-ion batteries under different test conditions

Dongsheng Ren et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Quantifying inactive lithium in lithium metal batteries

Chengcheng Fang et al.

NATURE (2019)

添加到收藏夹

Article Energy & Fuels

A comparative investigation of aging effects on thermal runaway behavior of lithium-ion batteries

Dongsheng Ren et al.

ETRANSPORTATION (2019)

添加到收藏夹

Review Energy & Fuels

A review on the key issues of the lithium ion battery degradation among the whole life cycle

Xuebing Han et al.

ETRANSPORTATION (2019)

添加到收藏夹

Review Energy & Fuels

Lithium-ion battery fast charging: A review

Anna Tomaszewska et al.

ETRANSPORTATION (2019)

添加到收藏夹

Article Energy & Fuels

Model-based thermal runaway prediction of lithium-ion batteries from kinetics analysis of cell components

Dongsheng Ren et al.

APPLIED ENERGY (2018)

添加到收藏夹

Article Chemistry, Physical

A look into the voltage plateau signal for detection and quantification of lithium plating in lithium-ion cells

Xiao-Guang Yang et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Electrochemistry

Investigation of Lithium Plating-Stripping Process in Li-Ion Batteries at Low Temperature Using an Electrochemical Model

Dongsheng Ren et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Quantitative and time-resolved detection of lithium plating on graphite anodes in lithium ion batteries

Johannes Wandt et al.

MATERIALS TODAY (2018)

添加到收藏夹

Review Chemistry, Physical

Thermal runaway mechanism of lithium ion battery for electric vehicles: A review

Xuning Feng et al.

ENERGY STORAGE MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction

Christian von Lueders et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Chemistry, Physical

Correlation of aging and thermal stability of commercial 18650-type lithium ion batteries

M. Boerner et al.

JOURNAL OF POWER SOURCES (2017)

添加到收藏夹

Article Energy & Fuels

Influence of operational condition on lithium plating for commercial lithium-ion batteries - Electrochemical experiments and post-mortem-analysis

Madeleine Ecker et al.

APPLIED ENERGY (2017)

添加到收藏夹

Article Electrochemistry

Effects of rest time after Li plating on safety behavior-ARC tests with commercial high-energy 18650 Li-ion cells

Thomas Waldmann et al.

ELECTROCHIMICA ACTA (2017)

添加到收藏夹

Article Chemistry, Physical

Voltage relaxation and impedance spectroscopy as in-operando methods for the detection of lithium plating on graphitic anodes in commercial lithium-ion cells

Stefan Schindler et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Chemistry, Physical

Impact of cycling at low temperatures on the safety behavior of 18650-type lithium ion cells: Combined study of mechanical and thermal abuse testing accompanied by post-mortem analysis

Alex Friesen et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Chemistry, Physical

Low temperature aging mechanism identification and lithium deposition in a large format lithium iron phosphate battery for different charge profiles

Minggao Ouyang et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Chemistry, Physical

In situ detection of lithium metal plating on graphite in experimental cells

C. Uhlmann et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Electrochemistry

Analysis of the Implications of Rapid Charging on Lithium-Ion Battery Performance

Mohammed F. Hasan et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

添加到收藏夹

Article Electrochemistry

Influence of Cell Design on Temperatures and Temperature Gradients in Lithium-Ion Cells: An In Operando Study

Thomas Waldmann et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

添加到收藏夹

Article Electrochemistry

Impact of Tab Locationon Large Format Lithium-Ion Pouch Cell Based on Fully Coupled Tree-Dimensional Electrochemical-Thermal Modeling

Ahmadou Samba et al.

ELECTROCHIMICA ACTA (2014)

添加到收藏夹

Article Chemistry, Physical

Lithium plating in lithium-ion batteries at sub-ambient temperatures investigated by in situ neutron diffraction

Veronika Zinth et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Chemistry, Physical

Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries

Mathias Petzl et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Chemistry, Physical

Physical characterization of the charging process of a Li-ion battery and prediction of Li plating by electrochemical modelling

N. Legrand et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Electrochemistry

In Situ Measurement of Radial Temperature Distributions in Cylindrical Li-Ion Cells

Guangsheng Zhang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

A superconcentrated ether electrolyte for fast-charging Li-ion batteries

Yuki Yamada et al.

CHEMICAL COMMUNICATIONS (2013)

添加到收藏夹

Review Chemistry, Physical

A review on the key issues for lithium-ion battery management in electric vehicles

Languang Lu et al.

JOURNAL OF POWER SOURCES (2013)

添加到收藏夹

Article Electrochemistry

Li-Ion Cell Operation at Low Temperatures

Yan Ji et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

添加到收藏夹

Review Electrochemistry

A Critical Review of Thermal Issues in Lithium-Ion Batteries

Todd M. Bandhauer et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

添加到收藏夹

Review Electrochemistry

A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries

Pallavi Verma et al.

ELECTROCHIMICA ACTA (2010)

添加到收藏夹

Review Chemistry, Physical

Lithium batteries: Status, prospects and future

Bruno Scrosati et al.

JOURNAL OF POWER SOURCES (2010)

添加到收藏夹

Article Chemistry, Physical

Overcharge studies of carbon fiber composite-based lithium-ion cells

S. Hossain et al.

JOURNAL OF POWER SOURCES (2006)

添加到收藏夹

Article Electrochemistry

Rapid charging of lithium-ion batteries using pulsed currents - A theoretical analysis

BK Purushothaman et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)

添加到收藏夹

Review Chemistry, Physical

Review of models for predicting the cycling performance of lithium ion batteries

Shriram Santhanagopalan et al.

JOURNAL OF POWER SOURCES (2006)

添加到收藏夹

Article Electrochemistry

Low temperature performance of graphite electrode in Li-ion cells

SS Zhang et al.

ELECTROCHIMICA ACTA (2002)

添加到收藏夹

Article Chemistry, Physical

The effects of pulse charging on cycling characteristics of commercial lithium-ion batteries

J Li et al.

JOURNAL OF POWER SOURCES (2001)

添加到收藏夹

Article Electrochemistry

The limits of low-temperature performance of Li-ion cells

CK Huang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.