☆ 4.6 Article

3-Trimethylsilyl-2-oxazolidinone, as a multifunctional additive to stabilize FEC-containing electrolyte for sodium metal batteries

ELECTROCHIMICA ACTA (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Environmental

Solvation structure and solid electrolyte interface engineering for excellent Na+ storage performances of hard carbon with the ether-based electrolytes

Zhiqiang Lv et al.

Summary: Ether-based electrolytes exhibit superior Na+ storage performance for hard carbon compared to ester-based ones due to lower de-solvation energy from co-intercalation behavior, as well as the unique SEI structure in ether-based electrolyte enhancing Na+ diffusion and interface stability. Ether-based solvent with short chain length also positively impacts Na+ storage, showing a synergistic effect with other mechanisms.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Liquid electrolyte development for low-temperature lithium-ion batteries

Dion Hubble et al.

Summary: This article discusses the performance issues of lithium-ion batteries at low temperatures and proposes strategies to address the problem through electrolyte engineering. By increasing additives, solvents, and lithium salts, the performance of lithium-ion batteries in low-temperature environments can be improved.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Implications of Na-ion solvation on Na anode-electrolyte interphase

S. K. Vineeth et al.

Summary: Sodium-metal anode battery technologies have brought significant advancements to energy storage research. New insights have been gained on the composition and stability of the solid electrolyte interphase (SEI) on the sodium-metal anode, with a focus on the impact of electrolyte structure and ion-solvation chemistry. This review discusses the crucial aspects of ion-solvation chemistry on the stability of SEI and highlights future research directions for designing a stable sodium-metal anode.

TRENDS IN CHEMISTRY (2022)

添加到收藏夹

Article Electrochemistry

Guiding Uniform Sodium Deposition through Host Modification for Sodium Metal Batteries

Chhail Bihari Soni et al.

Summary: Room-temperature Na metal batteries have high specific capacity and natural abundance, making them an emerging energy storage technology beyond Li-ion batteries. However, Na metal anodes face challenges such as unstable solid electrolyte interface and undesirable dendrite growth. Research on mechanically stable and sodiophilic hosts to accommodate Na for improved cyclability is crucial for the advancement of Na metal batteries.

BATTERIES & SUPERCAPS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Multifunctional Electrolyte Additive Stabilizes Electrode-Electrolyte Interface Layers for High-Voltage Lithium Metal Batteries

Yongchao Liu et al.

Summary: The use of N,O-bis(trimethylsilyl) trifluoro acetamide (BTA) as a multifunctional additive showed significant benefits in improving the electrochemical performance of lithium metal batteries, by modifying both anode and cathode surface layers. The BTA additive containing multiple functional groups promoted the formation of solid electrolyte interfacial films on a lithium metal anode and cathode surfaces, leading to enhanced electrode-electrolyte interfacial stability and reduced capacity decay caused by structural degradation of the cathode.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Engineering, Environmental

Recent development of Na metal anodes: Interphase engineering chemistries determine the electrochemical performance

Tiefeng Liu et al.

Summary: Recent research has focused on the interphase engineering chemistries of sodium metal anodes in batteries, highlighting advancements in addressing issues such as undesired dendrite growth and unstable solid electrolyte interphase. Understanding the critical role of a healthy SEI formed on the surface of sodium metal and implementing strategies to construct stable interphases can enhance the electrochemical stability of the anode.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Red Phosphorous-Derived Protective Layers with High Ionic Conductivity and Mechanical Strength on Dendrite-Free Sodium and Potassium Metal Anodes

Pengcheng Shi et al.

Summary: Introduction of an artificial Na3P layer on the surface of sodium metal anodes can achieve high-performance Na anodes by preventing dendrite growth and improving electrochemical performance. This method can also be applied to potassium metal anodes and extended to solid-state alkali metal batteries with high power density and energy density.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

Room-Temperature Sodium-Sulfur Batteries and Beyond: Realizing Practical High Energy Systems through Anode, Cathode, and Electrolyte Engineering

Alex Yong Sheng Eng et al.

Summary: Sodium-sulfur batteries offer a promising solution for energy storage systems with rigorous requirements, such as cost-effectiveness and high storage capacities. Key challenges include improving the anode-electrolyte interface engineering and focusing on core principles guiding use-inspired design of cathode architectures, from elemental sulfur and polysulfide cathodes to emerging host structures.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Low-Barrier, Dendrite-Free, and Stable Na Plating/Stripping Enabled by Gradient Sodiophilic Carbon Skeleton

Liang Yue et al.

Summary: The gradient sodiophilic carbon skeleton proposed in this study effectively regulates the sodium deposition behavior, achieving uniform plating and enhancing stability and safety, significantly reducing the risk of dendrite growth.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

An acetamide additive stabilizing ultra-low concentration electrolyte for long-cycling and high-rate sodium metal battery

Rui Jiang et al.

Summary: A new additive, BSTFA, is introduced in this study to stabilize the electrolyte and fabricate a highly conductive interface in sodium metal batteries, improving their performance.

ENERGY STORAGE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Hydrolysis of LiPF6-Containing Electrolyte at High Voltage

Mingzhu Liu et al.

Summary: By combining theoretical and experimental approaches, this study identified the direct reaction between water and PF6- as the main source of corrosive HF in Li-ion batteries. This hydrolysis process is accelerated by high voltage, highlighting the need for effective mitigation strategies to stabilize LiPF6-based electrolytes for high voltage LIBs. Clarifying this important electrolyte failure mechanism points to the potential for improved battery performance and longevity.

ACS ENERGY LETTERS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Critical effects of electrolyte recipes for Li and Na metal batteries

Xueying Zheng et al.

Summary: This paper discusses the critical effects of electrolyte design on the stability of Li/Na metal batteries, reviews the working mechanism of fluoroethylene carbonate (FEC) and the controversial role of LiF, and proposes strategies for further development based on a thorough discussion of these effects.

CHEM (2021)

添加到收藏夹

Article Chemistry, Analytical

Cycling degradation and safety issues in sodium-ion batteries: Promises of electrolyte additives

Behrooz Mosallanejad et al.

Summary: Sodium-ion batteries have emerged as a promising alternative to lithium-ion batteries, but still face challenges with cycling performance and safety. The addition of small amounts of additives to the electrolyte can help address these issues.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Probing the Na metal solid electrolyte interphase via cryo-transmission electron microscopy

Bing Han et al.

Summary: This study investigates the effect of fluoroethylene carbonate (FEC) on the solid electrolyte interphase (SEI) structure of a Na-metal electrode using cryo-TEM. The results demonstrate that FEC can stabilize the SEI, preventing further reactions between the electrolyte and the Na metal.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Physical

Research progress of fluorine-containing electrolyte additives for lithium ion batteries

Ningbo Xu et al.

Summary: Utilizing fluorine-containing electrolyte additives to construct Solid Electrolyte Interface (SEI) film is an effective way to improve the electrochemical performance and safety of lithium-ion batteries. These additives possess excellent kinetic reactivity, promoting the stable generation of SEI and CEI films, while also acting as flame-retardants to enhance battery safety.

JOURNAL OF POWER SOURCES ADVANCES (2021)

添加到收藏夹

Article Chemistry, Physical

Improving cyclic stability of LiNi0.6Co0.2Mn0.2O2-SiOx/graphite full cell using tris(trimethylsilyl)phosphite and fluoroethylene carbonate as combinative electrolyte additive

Bangwei Deng et al.

IONICS (2020)

添加到收藏夹

Article Chemistry, Physical

An electrolyte additive capable of scavenging HF and PF5 enables fast charging of lithium-ion batteries in LiPF6-based electrolytes

Jung-Gu Han et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Chemistry, Physical

Cyclic Aminosilane-Based Additive Ensuring Stable Electrode-Electrolyte Interfaces in Li-Ion Batteries

Koeun Kim et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Stabilized High-Voltage Cathodes via an F-Rich and Si-Containing Electrolyte Additive

Yuanqin Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Controlling Surface Phase Transition and Chemical Reactivity of O3-Layered Metal Oxide Cathodes for High-Performance Na-Ion Batteries

Junhua Song et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ion-Solvent Chemistry-Inspired Cation-Additive Strategy to Stabilize Electrolytes for Sodium-Metal Batteries

Xiang Chen et al.

CHEM (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Unanticipated Mechanism of the Trimethylsilyl Motif in Electrolyte Additives on Nickel-Rich Cathodes in Lithium-Ion Batteries

Min Woo Park et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Realizing a high-performance LiNi0.6Mn0.2Co0.2O2/silicon-graphite full lithium ion battery cell via a designer electrolyte additive

Felix Aupperle et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Chemistry, Physical

Construction of a Stable LiNi0.8Co0.1Mn0.1O2 (NCM811) Cathode Interface by a Multifunctional Organosilicon Electrolyte Additive

Yezhen Zheng et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stable Na Metal Anode Enabled by a Reinforced Multistructural SEI Layer

Zhixin Xu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Scavenging Materials: Scavenging Materials to Stabilize LiPF 6 ‐Containing Carbonate‐Based Electrolytes for Li‐Ion Batteries (Adv. Mater. 20/2019)

Jung‐Gu Han et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Stabilizing a High-Voltage Lithium-Rich Layered Oxide Cathode with a Novel Electrolyte Additive

Jianlian Lan et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Citraconic anhydride as an electrolyte additive to improve the high temperature performance of LiNi0.6Co0.2Mn0.2O2/graphite pouch batteries

Chengyun Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Scavenging Materials to Stabilize LiPF6-Containing Carbonate-Based Electrolytes for Li-Ion Batteries

Jung-Gu Han et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

The influence of FEC on the solvation structure and reduction reaction of LiPF6/EC electrolytes and its implication for solid electrolyte interphase formation

Tingzheng Hou et al.

NANO ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Unraveling and Mitigating the Storage Instability of Fluoroethylene Carbonate-Containing LiPF6 Electrolytes To Stabilize Lithium Metal Anodes for High-Temperature Rechargeable Batteries

Chao Xu et al.

ACS APPLIED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Accurate Determination of Coulombic Efficiency for Lithium Metal Anodes and Lithium Metal Batteries

Brian D. Adams et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Review Chemistry, Physical

Ionic Liquids and Organic Ionic Plastic Crystals: Advanced Electrolytes for Safer High Performance Sodium Energy Storage Technologies

Andrew Basile et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent developments and insights into the understanding of Na metal anodes for Na-metal batteries

Yang Zhao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Dendrite-free Na metal plating/stripping onto 3D porous Cu hosts

Tian-Shi Wang et al.

ENERGY STORAGE MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

In Situ Optical Imaging of Sodium Electrodeposition: Effects of Fluoroethylene Carbonate

Rodrigo Rodriguez et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

Fluoroethylene Carbonate as an Important Component for the Formation of an Effective Solid Electrolyte Interphase on Anodes and Cathodes for Advanced Li-Ion Batteries

Elena Markevich et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Review Chemistry, Physical

Novel Methods for Sodium-Ion Battery Materials

Chenglong Zhao et al.

SMALL METHODS (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Sodium-ion batteries: present and future

Jang-Yeon Hwang et al.

CHEMICAL SOCIETY REVIEWS (2017)

添加到收藏夹

Article Electrochemistry

Investigating the influence of high temperatures on the cycling stability of a LiNi0.6Co0.2Mn0.2O2 cathode using an innovative electrolyte additive

Bangwei Deng et al.

ELECTROCHIMICA ACTA (2017)

添加到收藏夹

Article Chemistry, Physical

Fluoroethylene Carbonate and Vinylene Carbonate Reduction: Understanding Lithium-Ion Battery Electrolyte Additives and Solid Electrolyte Interphase Formation

Alison L. Michan et al.

CHEMISTRY OF MATERIALS (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Electrolyte additives for lithium ion battery electrodes: progress and perspectives

Atetegeb Meazah Haregewoin et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Highly Reversible Room-Temperature Sodium Metal Anode

Zhi Wei Seh et al.

ACS CENTRAL SCIENCE (2015)

添加到收藏夹

Article Chemistry, Physical

High-performance FeSb-TiC-C nanocomposite anodes for sodium-ion batteries

Il Tae Kim et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

添加到收藏夹

Article Chemistry, Physical

Effects of London dispersion correction in density functional theory on the structures of organic molecules in the gas phase

Stefan Grimme et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

添加到收藏夹

Article Chemistry, Physical

Oxidation induced decomposition of ethylene carbonate from DFT calculations - importance of explicitly treating surrounding solvent

Lidan Xing et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2012)

添加到收藏夹

Article Chemistry, Physical

Conformational effects, molecular orbitals, and reaction activities of bis(phthalocyaninato) lanthanum double-deckers: Density functional theory calculations

Dongdong Qi et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.