4.7 Article

One-step preparation and ablation behavior of ZrC-SiC-Si coating for nose-shaped ZrC/C composites with gradient pore structure by vapor silicon infiltration

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Materials Science, Multidisciplinary

Micro/nano multiscale reinforcing strategies toward extreme high-temperature applications: Take carbon/carbon composites and their coatings as the examples

Qiangang Fu et al.

Summary: Carbon fiber reinforced carbon composites (C/Cs) are promising high-temperature materials, but they are prone to destructive oxidation at elevated temperatures. Matrix modification and coating technologies are not sufficient due to brittleness of ceramics and other inherent issues. Micro/nano multiscale reinforcing strategies have been developed in the past two decades to fabricate C/Cs with high strength and excellent high-temperature stability.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Materials Science, Ceramics

Oxidation protective SiC-Si coating for carbon/carbon composites by gaseous silicon infiltration and pack cementation: A comparative investigation

Lei Zhou et al.

Summary: The GSI-SiC-Si coating showed lower roughness, better mechanical and anti-oxidation properties compared to the PC-SiC-Si coating. It could effectively protect C/C composites under high temperatures for an extended period without weight loss.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Multidisciplinary

Fabrication and characteristics of a HfC/TiC multilayer coating by a vacuum plasma spray process to protect C/C composites against oxidation

Ho Seok Kim et al.

Summary: A multilayer coating of hafnium carbide and titanium carbide was fabricated on SiC-coated carbon/carbon (C/C) composite using a vacuum plasma spraying (VPS) system. The analysis of microstructure, composition, adhesion strength, and ablation performance confirmed that the HfC/TiC multilayer coating can effectively protect the carbon composite material.

CORROSION SCIENCE (2021)

Article Materials Science, Multidisciplinary

Mechanical properties and ablation resistance of La2O3-modified HfC-SiC coating for SiC-coated C/C composites

Guanghui Feng et al.

Summary: The plasma-sprayed La2O3-modified HfC-SiC (HSL) coating exhibits superior ablation resistance and elastic modulus on SiC-coated carbon/carbon composites, primarily attributed to its unique structure and composition.

CORROSION SCIENCE (2021)

Article Engineering, Multidisciplinary

Ablation behavior and thermal conduction mechanism of 3D ZrC-SiC-modified carbon/carbon composite having high thermal conductivity using mesophase-pitch-based carbon fibers and pyrocarbon as heat transfer channels

Dong Huang et al.

Summary: By investigating the preparation and ablation performance of ZrC-SiC-modified carbon/carbon composites, the goal of reducing ablation rate and improving thermal conductivity was achieved, providing a new solution for the application in hypersonic vehicles.

COMPOSITES PART B-ENGINEERING (2021)

Article Engineering, Multidisciplinary

Ablation and heat insulation performances of nose-shaped ZrC-C composites with gradient pore structure

Ningning Yan et al.

Summary: Nose-shaped ZrC-C composites with gradient pore structure (ZrC-CGS) were successfully prepared using ZrC skeleton as preform, showing superior ablation and heat insulation performance. Compared with ZrC-C composites with dense structure, ZrC-CGS composites have a lower mass ablation rate, higher heat resistance capacity, and lower coefficients of thermal expansion.

COMPOSITES PART B-ENGINEERING (2021)

Article Materials Science, Multidisciplinary

Microstructure evolution and oxidation resistance of CaO-Al2O3-SiO2/ZrO2-borosilicate multilayer coating for C/C composites

Yi Gu et al.

Summary: The CaO-Al2O3-SiO2/ZrO2-borosilicate (CAS/BG) multilayer glass coating prepared on carbon fiber reinforced carbon matrix (C/C) materials can effectively improve their anti-oxidation ability while maintaining excellent mechanical properties. The addition of outer CAS layer can effectively inhibit gases diffusing by sealing and healing defects, thus enhancing the antioxidation property of the materials.

CORROSION SCIENCE (2021)

Article Materials Science, Multidisciplinary

Effect of temperature gradient on the ablation and flexural behavior of C/C-ZrC composites

Tianyu Liu et al.

Summary: A new ablation condition was designed to investigate the effect of temperature gradient on the ablation and flexural behavior of C/C-ZrC composites. The volume change caused by ZrC -> ZrO2 and the ZrO2 crystalline transformation were beneficial for releasing internal stress, thereby contributing to the higher flexural strength retention of the composites.

CORROSION SCIENCE (2021)

Article Materials Science, Ceramics

High pyroelectric response over a broad temperature range in NBT-BZT: SiO2 composites for energy harvesting

Meng Shen et al.

Summary: The study improved the heat transfer and broadened the pyroelectric temperature region of NBT-BZT materials by constructing SiO2 networks, leading to high pyroelectric energy density and stability.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Ablation resistance of HfC-TaC/HfC-SiC alternate coating for SiC-coated carbon/carbon composites under cyclic ablation

Guanghui Feng et al.

Summary: Alternate coatings of HfC-TaC/HfC-SiC with different sublayer thicknesses were fabricated on SiC-coated carbon/carbon composites, showing the best ablation performance due to the dense oxide layer and stress release from dendritic cracks. Additionally, exfoliation at the interface of adjacent sublayers in some coatings led to violent evaporation of exposed sublayers.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Ablation behavior of ZrC and ZrO2 coatings on SiC coated C/C composites under oxyacetylene torch with different heat fluxes

Guanghui Feng et al.

Summary: The ablation behavior of ZrC and ZrO2 coatings on SiC-coated carbon/carbon composites was studied under different heat fluxes, demonstrating that ZrO2 coating exhibited denser oxide layer and lower mass consumption compared to ZrC. The differences were attributed to higher surface temperature and lower melting point of ZrO2 coating, leading to easier sintering during ablation.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Multidisciplinary

Zirconium carbide skeleton reinforced pyrocarbon composites with tunable mechanical strength, thermophysical properties and ablation resistance

Ningning Yan et al.

Summary: ZrC-C composites with different weight ratios of ZrC/PyC were prepared, and the results showed that increasing the weight ratio of ZrC/PyC led to higher compressive strengths, as well as the formation of a ZrO2 skeleton that could reduce composite consumption. Finite element simulation demonstrated that thermal stresses increased with the weight ratios of ZrC/PyC.

CORROSION SCIENCE (2021)

Article Materials Science, Multidisciplinary

New insight into the ablation behavior of C/C-ZrC composites in a nitrogen plasma torch with a high heat flux of ∼25 MW/m2

Xuetao Shen et al.

Summary: The ablation of C/C-ZrC composites at a heat flux of 25 MW/m(2) in a nitrogen plasma torch is characterized by a lower linear ablation rate compared to other composites, mainly due to the formation of ZrN/ZrO2, which blocks chemical reactions and absorbs heat from the plasma jet. Thermochemical ablation, mechanical breakage, and carbon sublimation control the ablation process, with the latter playing a minor role.

CORROSION SCIENCE (2021)

Article Materials Science, Ceramics

ZrC/C aerogel with high compressive strength by a carbothermic process

Sue Ren et al.

Summary: The ZrC/C aerogel was successfully prepared using ZrOC and PF as sols, HMTA as cross-linker, displaying low bulk density, relatively low thermal conductivity, and high compressive strength. XRD, SEM, and XPS analyses characterized the morphology and microstructure of the aerogels, revealing phase transformation of ZrO2 into ZrC at high temperatures.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Structural design and ablation performance of ZrB2/MoSi2 laminated coating for SiC coated carbon/carbon composites

Hu Dou et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Article Chemistry, Physical

Micromechanical properties of pyrolytic carbon with interlayer crosslink

MingWei Chen et al.

CARBON (2020)

Article Materials Science, Ceramics

SiC/MoSi2 based coatings for Cf/C composites by two step pack cementation

Federica Bezzi et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Article Engineering, Multidisciplinary

Effects of thermal shock on the microstructures, mechanical and thermophysical properties of SiCnws-C/C composites

Qiangang Fu et al.

COMPOSITES PART B-ENGINEERING (2019)

Article Chemistry, Physical

Oxidation and ablation protection of double layer HfB2-SiC-Si/SiC-Si coating for graphite materials

Yan Jiang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Materials Science, Ceramics

Strong ZrC ceramics at high temperatures with the addition of W

Yi-Bo Shen et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Article Engineering, Multidisciplinary

Microstructure and properties of plain-weave carbon fabric reinforced ceramic composites containing Cu-Si alloy

Yang Li et al.

COMPOSITES PART B-ENGINEERING (2018)

Article Materials Science, Ceramics

Long-time ablation protection of carbon/carbon composites with different-La2O3-content modified ZrC coating

Yujun Jia et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Review Materials Science, Multidisciplinary

Design, Preparation and Properties of Carbon Fiber Reinforced Ultra-High Temperature Ceramic Composites for Aerospace Applications: A Review

Sufang Tang et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)

Article Materials Science, Ceramics

Ablation resistance of HfB2-SiC coating prepared by in-situ reaction method for SiC coated C/C composites

Peipei Wang et al.

CERAMICS INTERNATIONAL (2017)

Article Chemistry, Physical

Oxidation and ablation resistance of the ZrB2-CrSi2-Si/SiC coating for C/C composites at high temperature

Tao Feng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Article Materials Science, Ceramics

Ablation resistance of ZrC/SiC gradient coating for SiC-coated carbon/carbon composites prepared by supersonic plasma spraying

Dong-Jia Yao et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

Article Materials Science, Ceramics

Erosion resistance of C/C-SiC-ZrB2 composites exposed to oxyacetylene torch

Yue Liu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

Article Materials Science, Coatings & Films

SiC/ZrB2-SiC-ZrC multilayer coating for carbon/carbon composites against ablation

Yulei Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Article Materials Science, Multidisciplinary

Ablation resistance of SiC-ZrC coating prepared by a simple two-step method on carbon fiber reinforced composites

Xiao-Hong Shi et al.

CORROSION SCIENCE (2014)

Article Materials Science, Ceramics

Ablation behavior and mechanism of C/C-ZrC-SiC composites under an oxyacetylene torch at 3000 °C

Jing Xie et al.

CERAMICS INTERNATIONAL (2013)

Article Materials Science, Multidisciplinary

Oxidation and ablation resistance of ZrB2-SiC-Si/B-modified SiC coating for carbon/carbon composites

Feng Tao et al.

CORROSION SCIENCE (2013)

Article Materials Science, Multidisciplinary

Oxidation protection and behavior of C/C composites with an in situ SiC nanowire-SiC-Si/SiC-Si coating

Yanhui Chu et al.

CORROSION SCIENCE (2013)

Article Materials Science, Multidisciplinary

HfC/ZrC ablation protective coating for carbon/carbon composites

Xiang Xiong et al.

CORROSION SCIENCE (2013)

Article Thermodynamics

Temperature Jump Phenomenon During Plasmatron Testing of ZrB2-SiC Ultrahigh-Temperature Ceramics

Jochen Marschall et al.

JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2012)

Article Chemistry, Physical

Oxidation resistance of YSZ-alumina composites compared to normal YSZ TBC coatings at 1100°C

A. Keyvani et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Article Materials Science, Ceramics

ZrB2-SiC Oxidation Protective Coating on C/C Composites Prepared by Vapor Silicon Infiltration Process

Haijun Zhou et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)

Article Materials Science, Ceramics

A computational analysis of a ZrO2-SiO2 scale for a ZrB2-ZrC-Zr ultrahigh temperature ceramic composite system

Harita Petla et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)

Article Materials Science, Ceramics

A Si-SiC oxidation protective coating for carbon/carbon composites prepared by a two-step pack cementation

Fu Qian-Gang et al.

CERAMICS INTERNATIONAL (2009)

Article Materials Science, Ceramics

Electrical properties and thermal expansion of cordierite and cordierite-mullite materials

MA Camerucci et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2001)