☆ 4.7 Article

3D concrete printing with cement-coated recycled crumb rubber: Compressive and microstructural properties

CONSTRUCTION AND BUILDING MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

3D-printed concrete with recycled glass: Effect of glass gradation on flexural strength and microstructure

Junli Liu et al.

Summary: Sustainable 3D concrete printing has gained attention recently, with one method being the replacement of natural river sand with recycled glass. This study focused on the flexural properties of 3D-printed concrete with different gradations of recycled glass, finding that glass addition can impact flexural strength and microstructural properties. The research showed that the location and morphology of pores related to the addition of glass particles influence crack propagation and ultimate strength.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Review Engineering, Manufacturing

Additive Manufacturing of Sustainable Construction Materials and Form-finding Structures: A Review on Recent Progresses

Junli Liu et al.

Summary: This review discusses the sustainability advantage of 3D concrete printing technology, exploring various approaches to achieving sustainable construction through the use of environmentally friendly materials, structural optimization, and modularization methods.

3D PRINTING AND ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Construction & Building Technology

Evaluating the effects of porosity on the mechanical properties of extrusion-based 3D printed concrete

Marchant van den Heever et al.

Summary: Elements fabricated by extrusion-based 3D concrete printing (3DCP) exhibit anisotropic mechanical properties, and the porosity has been found to affect the elasticity and compressive strength. This research quantitatively investigates the porosity metrics of a fibre-reinforced printable concrete (FRPC) mixture and finds that 3DCP samples have higher porosity and altered void attributes. Experimental findings show that the increase in porosity is associated with a decrease in elastic modulus and compressive capacity. The porosity is influenced by factors such as loading direction, stress concentrations, and deformability of the composite configuration.

CEMENT AND CONCRETE RESEARCH (2022)

添加到收藏夹

Article Construction & Building Technology

Mechanical and shrinkage performance of 3D-printed rubberised engineered cementitious composites

Farhad Aslani et al.

Summary: This paper evaluates the material behavior of rubberized engineered cementitious composites (ECC) using waste crumb rubber (CR) aggregates and polyvinyl alcohol (PVA) fibers manufactured through 3D concrete printing (3DCP). The study finds that adding PVA fibers and waste crumb rubber can improve the mechanical performance and shrinkage behavior of the concrete. Furthermore, compared to conventional mold casting, 3D printed elements show superior performance in terms of strength, ductility, flexural behavior, and shrinkage performance.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber

Junhong Ye et al.

Summary: A novel ultra-high ductile concrete (UHDC) modified with crumb rubber was developed for 3D concrete printing. Mechanical tests revealed that the printed UHDC had higher deformability and energy dissipation in certain directions compared to mold-cast UHDC. Additionally, minimal anisotropy was found in flexural strength, but significant anisotropy in flexural deformability, compressive strength and flexural energy dissipation capacity of the printed UHDC.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Fiber-reinforced mortar with 100% recycled fine aggregates: A cleaner perspective on 3D printing

Jianzhuang Xiao et al.

Summary: The study evaluated the possibility of fully replacing NFA with RFA for 3DMP through DIC technique, mechanical testing, and microscopic analysis. The results showed that 100% replacement of RFA had limited impact on the failure pattern of 3DP specimens, while the addition of 1% PE fibers changed the failure pattern from brittle to ductile. After reinforcing with fibers, 3DP mortar mixed with 100% RFA exhibited higher mechanical properties and better deformation ability compared to fiber-free mortar with 100% NFA.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Construction & Building Technology

Use of magnesium-silicate-hydrate (M-S-H) cement mixes in 3D printing applications

Biranchi Panda et al.

Summary: This study focused on the development of 3D printable MgO-SiO2 binders by evaluating the effects of parameters such as MgO/SiO2 ratios and superplasticizer dosage. The best-performing mix was characterized by XRD, TG/DTG, and FESEM with EDS for its printability and mechanical performance. The final product contained brucite and M-S-H hydration products, contributing to its mechanical performance and microstructural densification.

CEMENT & CONCRETE COMPOSITES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterization of air-void systems in 3D printed cementitious materials using optical image scanning and X-ray computed tomography

Yu Chen et al.

Summary: Air voids play a dominant role in interlayer bond strength of 3D printed cementitious materials. The majority of air voids are evenly distributed within the 10-1000μm diameter range, displaying irregular and elongated shapes. Large air voids enclosed between printed filaments in the interface region contribute to relatively higher local porosity.

MATERIALS CHARACTERIZATION (2021)

添加到收藏夹

Review Engineering, Environmental

Recycling of landfill wastes (tyres, plastics and glass) in construction - A review on global waste generation, performance, application and future opportunities

Wahid Ferdous et al.

Summary: The paper critically reviews the issues of tyre, plastic, and glass landfill waste globally. It emphasizes the inadequate recycling rates and the environmental problems caused by waste landfilling. The importance of finding new strategies for waste utilization is highlighted, along with a summary of global and country-specific production, recycling, and landfill rates.

RESOURCES CONSERVATION AND RECYCLING (2021)

添加到收藏夹

Review Engineering, Civil

Dynamic performance of rubberised concrete and its structural applications ? An overview

Essam Eltayeb et al.

Summary: Rubberised concrete shows superior properties at high strain rates and is suitable for civil engineering applications. Compared to traditional concrete, rubberised concrete performs better in reinforced concrete structural applications, exhibiting advantages in high velocity impact, blast loads, and improved ductile performance under dynamic loads.

ENGINEERING STRUCTURES (2021)

添加到收藏夹

Article Construction & Building Technology

Sustainable materials for 3D concrete printing

Shantanu Bhattacherjee et al.

Summary: This paper examines the sustainability aspects of binders used in concrete 3D concrete printing, emphasizing the importance of reducing embodied impacts to enhance sustainability potential. It reviews literature on different binder systems and explores alternative binders, highlighting the effect of using supplementary cementing materials and alternative binder systems for improving the sustainability of 3D printed structures. By quantifying environmental impacts, the paper illustrates the potential of sustainability assessment in terms of energy consumption and CO2 emissions with different binder systems.

CEMENT & CONCRETE COMPOSITES (2021)

添加到收藏夹

Article Construction & Building Technology

Quantitative microstructural investigation of 3D-printed and cast cement pastes using micro-computed tomography and image analysis

Reza Moini et al.

Summary: The microstructural phases and mechanical properties of lamellar 3D-printed and cast hardened cement paste elements were studied using lab-based X-ray microscopy at different magnifications. Three microstructural features were identified in distinct pore size domains, with differences observed in pore size between the 3D-printed and cast elements. The interconnected pore network in the 3D-printed elements was discussed in relation to mechanical response and fracture properties.

CEMENT AND CONCRETE RESEARCH (2021)

添加到收藏夹

Article Construction & Building Technology

Mechanical and microstructural evolution of 3D printed concrete with polyethylene fiber and recycled sand at elevated temperatures

Jianzhuang Xiao et al.

Summary: The study investigated the influence of recycled sand and polyethylene fiber on the mechanical properties and pore structure of 3D printed concrete under high temperatures, particularly at 600 degrees Celsius and 800 degrees Celsius. The results showed that these additives could modify the pore structure of 3DPC and mitigate the risks of explosive spalling.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Flexural properties of 3D printed fibre-reinforced concrete with recycled sand

Tao Ding et al.

Summary: The study found that the addition of PE fibers can compensate for the negative impact of recycled sand on the flexural properties of 3D printed concrete specimens, significantly improving the flexural strength. Scanning electron microscopy results showed that the attachment of recycled sand can increase the porosity of the specimens.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental measurement on the effects of recycled glass cullets as aggregates for construction 3D printing

Guan Heng Andrew Ting et al.

Summary: This study investigates the effects of recycled glass cullets as fine aggregates for construction 3D printing materials. The results show that as the content of recycled glass cullets increases, the rheological properties and mechanical properties of the material change accordingly.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Construction & Building Technology

Dynamic compressive properties of lightweight rubberized concrete

Thong M. Pham et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing

Biranchi Panda et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

Mechanical behavior of 3D printed mortar with recycled sand at early ages

Tao Ding et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance

Luong Pham et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing

Yu Chen et al.

CEMENT & CONCRETE COMPOSITES (2020)

添加到收藏夹

Article Construction & Building Technology

Improving printability of limestone-calcined clay-based cementitious materials by using viscosity-modifying admixture

Yu Chen et al.

CEMENT AND CONCRETE RESEARCH (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Comparative economic, environmental and productivity assessment of a concrete bathroom unit fabricated through 3D printing and a precast approach

Yiwei Weng et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Article Construction & Building Technology

Influence of rubber particles on the properties of foam concrete

Essam Eltayeb et al.

JOURNAL OF BUILDING ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

Dynamic compressive properties of lightweight rubberized geopolymer concrete

Thong M. Pham et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Materials Science, Composites

Preliminary Mechanical Analysis of Rubber-Cement Composites Suitable for Additive Process Construction

Matteo Sambucci et al.

JOURNAL OF COMPOSITES SCIENCE (2020)

添加到收藏夹

Article Construction & Building Technology

Development of Crumb Rubber Concrete for Practical Application in the Residential Construction Sector - Design and Processing

Osama Youssf et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Environmental Sciences

Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties

Guan Heng Andrew Ting et al.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application

Biranchi Panda et al.

MATERIALS LETTERS (2019)

添加到收藏夹

Article Construction & Building Technology

Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion

R. J. M. Wolfs et al.

CEMENT AND CONCRETE RESEARCH (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay

Biranchi Panda et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Green & Sustainable Science & Technology

Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing

Biranchi Panda et al.

JOURNAL OF CLEANER PRODUCTION (2019)

添加到收藏夹

Article Chemistry, Physical

The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing

Yu Chen et al.

MATERIALS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Printability region for 3D concrete printing using slump and slump flow test

Yi Wei Daniel Tay et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing

Biranchi Panda et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Construction & Building Technology

Novel approach to improve crumb rubber concrete strength using thermal treatment

El-Sayed Abd-Elaal et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Review Construction & Building Technology

Performance enhancement of rubberised concrete via surface modification of rubber: A review

Yang Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Review Construction & Building Technology

Applications of additive manufacturing in the construction industry - A forward-looking review

Daniel Delgado Camacho et al.

AUTOMATION IN CONSTRUCTION (2018)

添加到收藏夹

Article Construction & Building Technology

Effects of surface treatments of recycled tyre crumb on cement-rubber bonding in concrete composite foam

Alireza Kashani et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

An experimental investigation of the mechanical performance and structural application of LECA-Rubcrete

Osama Youssf et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Sound insulation properties of rubberized lightweight aggregate concrete

Binyu Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Construction & Building Technology

Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing

Biranchi Panda et al.

CEMENT & CONCRETE COMPOSITES (2018)

添加到收藏夹

Article Construction & Building Technology

Influence of acetic acid and calcium hydroxide treatments of rubber waste on the properties of rubberized mortars

Belen Munoz-Sanchez et al.

MATERIALS AND STRUCTURES (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

A sustainable application of recycled tyre crumbs as insulator in lightweight cellular concrete

Alireza Kashani et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Evaluation of properties and performance of rubber-modified concrete for recycling of waste scrap tire

Shuaicheng Guo et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Article Geosciences, Multidisciplinary

Stress concentrations around voids in three dimensions: The roots of failure

T. Davis et al.

JOURNAL OF STRUCTURAL GEOLOGY (2017)

添加到收藏夹

Review Engineering, Manufacturing

3D printing trends in building and construction industry: a review

Yi Wei Daniel Tay et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2017)

添加到收藏夹

Article Construction & Building Technology

Mechanical performance of FRP-confined and unconfined crumb rubber concrete containing high rubber content

Osama Youssf et al.

JOURNAL OF BUILDING ENGINEERING (2017)

添加到收藏夹

Article Construction & Building Technology

Surface modification of crumb rubber and its influence on the mechanical properties of rubber-cement concrete

Liang He et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Construction & Building Technology

Optimisation of rubberised concrete with high rubber content: An experimental investigation

Samar Raffoul et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effects of surface pre-coating and silica fume on crumb rubber-cement matrix interface and cement mortar properties

Obinna Onuaguluchi

JOURNAL OF CLEANER PRODUCTION (2015)

添加到收藏夹

Article Construction & Building Technology

UV modification of tire rubber for use in cementitious composites

Gregorio Ossola et al.

CEMENT & CONCRETE COMPOSITES (2014)

添加到收藏夹

Article Construction & Building Technology

In-depth assessment of Crumb Rubber Concrete (CRC) prepared by water-soaking treatment method for rigid pavements

Iman Mohammadi et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

添加到收藏夹

Article Green & Sustainable Science & Technology

Hardened properties of concrete mixtures containing pre-coated crumb rubber and silica fume

Obinna Onuaguluchi et al.

JOURNAL OF CLEANER PRODUCTION (2014)

添加到收藏夹

Article Construction & Building Technology

Rubber modified concrete improved by chemically active coating and silane coupling agent

Qiao Dong et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Construction & Building Technology

A two-staged surface treatment to improve properties of rubber modified cement composites

Baoshan Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

添加到收藏夹

Article Construction & Building Technology

Crumb rubber aggregate coatings/pre-treatments and their effects on interfacial bonding, air entrapment and fracture toughness in self-compacting rubberised concrete (SCRC)

Khalid Battal Najim et al.

MATERIALS AND STRUCTURES (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fire reaction properties of concrete made with recycled rubber aggregate

J. R. Correia et al.

FIRE AND MATERIALS (2012)

添加到收藏夹

Article Construction & Building Technology

Durability of rubberized mortar and concrete

Ilker Bekir Topcu et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2007)

添加到收藏夹

Article Construction & Building Technology

Mechanical characterisation of cement-based mortar incorporating rubber aggregates from recycled worn tyres

A Turatsinze et al.

BUILDING AND ENVIRONMENT (2005)

添加到收藏夹

Article Construction & Building Technology

Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates

CS Poon et al.

CONSTRUCTION AND BUILDING MATERIALS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.