☆ 4.7 Article

Microstructure and physical properties of poly(lactic acid)/ polycaprolactone/rice straw lightweight bio-composite foams for wall insulation

CONSTRUCTION AND BUILDING MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Applied

Aliphatic chains grafted cellulose nanocrystals with core-corona structures for efficient toughening of PLA composites

Weidong Niu et al.

Summary: To enhance the toughness of polylactic acid (PLA), researchers prepared aliphatic chains-grafted cellulose nanocrystals (ECNCs) as nanofillers. By modifying cellulose nanocrystals with various chlorides, ECNCs with core-corona structures were obtained. Among them, octanoyl chloride-esterified ECNCs (EOCNCs) showed the most efficient enhancement of PLA toughness.

CARBOHYDRATE POLYMERS (2022)

添加到收藏夹

Review Engineering, Environmental

Progress in upcycling polylactic acid waste as an alternative carbon source: A review

Ce Sun et al.

Summary: Polylactic acid (PLA) is the highest produced bio-based plastic globally, used to replace petroleum-based plastics and reduce environmental pollution. However, the raw materials for PLA production mainly come from food, posing a threat to food security. Recycling PLA can reduce waste pollution and lower carbon emissions.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Environmental

Honeycomb like CdS/sulphur-modified biochar composites with enhanced adsorption-photocatalytic capacity for effective removal of rhodamine B

Fuyan Kang et al.

Summary: The CdS/sulphur-modified biochar composites exhibit excellent adsorption-photocatalytic activity for efficient dye degradation. The superior performance is attributed to the large specific surface area, abundant reactive sites provided by the composite materials, and the promotion of migration and utilization of photoinduced carriers.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Manufacturing

Thin-structured and compostable wood fiber-polymer biocomposites: Fabrication and performance evaluation

Binh M. Trinh et al.

Summary: Poly(lactic acid) was used as a binder for wood fibers to create thin-structured biocomposites with improved mechanical properties and water resistance. The composites showed potential for applications such as compostable crates and thermo-formable sheets for single use food utensils.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Preparation of effective ultraviolet shielding poly (lactic acid)/poly (butylene adipate-co-terephthalate) degradable composite film using co-precipitation and hot-pressing method

Wenlong Li et al.

Summary: Biodegradable composite films of PLA and PBAT were prepared by a co-precipitation and hot-pressing method, showing improved mechanical properties and UV barrier properties upon the addition of 4%wt PBAT. The potential for UV screening packaging applications is high due to the excellent thermal stability and satisfactory mechanical properties of the composite films.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

添加到收藏夹

Article Materials Science, Composites

Preparation of super-toughened Poly(L-lactide) composites under elongational flow: A strategy for balancing stiffness and ductility

Zhi-Tao Yang et al.

Summary: A novel extrusion device, eccentric rotor extruder (ERE), was used to prepare high-performance PLA/PCL composites with elongational flow. SEM showed in-situ fiberization and improved interfacial adhesion of PLA/PCL, while DSC, 2D-SAXS, 2D-WAXD, and DMA were used to analyze compatibility and crystallization. Enhanced compatibility and crystallinity were confirmed to be induced by heterogeneous crystal nucleation on nano-fibrillated PCL phases and orientation of PLA, leading to significant improvement in elongation at break of PLA with a low loading of PCL.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Environmental

Feasibility of Manufacturing Disposable Cups using PLA/PCL Composites Reinforced with Wood Powder

Wallisson Alves da Silva et al.

Summary: The study successfully developed PLA/PCL composites with wood powder as reinforcement, which showed higher impact strength and hardness suitable for manufacturing disposable cups. High concentrations of wood powder did not severely compromise the material properties, although losses were observed in elastic modulus and tensile strength.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2021)

添加到收藏夹

Article Polymer Science

Preparation and characterization of microcellular foamed thermoplastic polyamide elastomer composite consisting of EVA/TPAE1012

Guotao Huang et al.

Summary: Thermoplastic polyamide elastomer (TPAE) is a high-performance elastomer prepared from nylon hard segments and polyether or polyester soft segments, providing excellent mechanical properties and elasticity. In this study, ethylene-vinyl acetate copolymer/polyamide-1012 elastomer (EVA/TPAE1012) composite materials were prepared for foam production, resulting in low density, small cell size, and high cell density foams with improved specific strength, resilience, and toughness.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Fully biodegradable polylactide foams with ultrahigh expansion ratio and heat resistance for green packaging

Peng Li et al.

Summary: In this study, long chain branching (LCB) structures were efficiently introduced into polylactide (PLA) using sustainable soybean oil (SO), leading to improved foamability, heat resistance, and accelerated hydrolytic degradation. The addition of SO significantly increased the amount of LCB structures in PLA, resulting in enhanced melting strength and crystallization performance. Furthermore, PLA foam trays with light weight and good heat resistance were successfully developed, offering a green alternative to non-degradable oil-based plastics in disposable packaging products.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

添加到收藏夹

Article Polymer Science

Thermo-Mechanical and Morphological Properties of Polymer Composites Reinforced by Natural Fibers Derived from Wet Blue Leather Wastes: A Comparative Study

Alessandro Nanni et al.

Summary: The study explored the use of wet blue leather wastes as natural reinforcing fibers in different polymer matrices, with poly(lactic acid) showing the best results and polyamide 12 and thermoplastic polyurethane also exhibiting positive behavior. However, thermoplastic elastomer-based samples performed poorly due to poor compatibility between hydrophilic fibers and the hydrophobic polymer matrix.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Composites

Effect of surface-modified silica on the thermal and mechanical behaviors of poly(lactic acid) and chemically crosslinked poly(lactic acid) composites

Chana Prapruddivongs et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2020)

添加到收藏夹

Article Engineering, Environmental

Biodegradable Nanocomposites Developed from PLA/PCL Blends and Silk Fibroin Nanoparticles: Study on the Microstructure, Thermal Behavior, Crystallinity and Performance

Masoud Dadras Chomachayi et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Highly Loaded Cellulose/Poly (butylene succinate) Sustainable Composites for Woody-Like Advanced Materials Application

Oskars Platnieks et al.

MOLECULES (2020)

添加到收藏夹

Article Construction & Building Technology

Cells analyses, mechanical and thermal stability of extruded polylactic acid/kenaf bio-composite foams

Nur Adilah Abu Hassan et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Tensile test on interlayer materials for laminated glass under diverse ageing conditions and strain rates

Xavier Centelles et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Compostable, fully biobased foams using PLA and micro cellulose for zero energy buildings

Kayode Oluwabunmi et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Construction & Building Technology

Effect of steel fibers on the durability properties of sand concrete with barley straws

M. S. Ammari et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Effect of flax shives content and size on the hygrothermal and mechanical properties of flax concrete

Ferhat Benmahiddine et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Thermal insulation using biodegradable poly(lactic acid)/date pit composites

Mohamed Saeed Barkhad et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Biodegradable Foam Cushions as Ecofriendly Packaging Materials

Joo Seong Sohn et al.

SUSTAINABILITY (2019)

添加到收藏夹

Article Construction & Building Technology

Preparation and optimization of ultra-light and thermal insulative aerogel foam concrete

Pengwei Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Polymer Science

Biocomposite foams from poly(lactic acid) and rubber wood sawdust: Mechanical properties, cytotoxicity, and in vitro degradation

Pasuta Sungsee et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review

Ivan Fortelny et al.

FRONTIERS IN MATERIALS (2019)

添加到收藏夹

Article Engineering, Environmental

Facile production of biodegradable PCL/PLA in situ nanofibrillar composites with unprecedented compatibility between the blend components

Adel Ramezani Kakroodi et al.

CHEMICAL ENGINEERING JOURNAL (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Comparative environmental life cycle assessment of fiber reinforced cement panel between kenaf and glass fibers

Chunheng Zhou et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Engineering, Environmental

Use of stereocomplex crystallites for fully-biobased microcellular low-density poly(lactic acid) foams for green packaging

Long Wang et al.

CHEMICAL ENGINEERING JOURNAL (2017)

添加到收藏夹

Review Pharmacology & Pharmacy

PLA composites: From production to properties

Marius Murariu et al.

ADVANCED DRUG DELIVERY REVIEWS (2016)

添加到收藏夹

Review Agricultural Engineering

A critical review of analytical methods in pretreatment of lignocelluloses: Composition, imaging, and crystallinity

Keikhosro Karimi et al.

BIORESOURCE TECHNOLOGY (2016)

添加到收藏夹

Article Polymer Science

Polyoxymethylene foam: From an investigation of key factors related to porous morphologies and microstructure to the optimization of foam properties

Nantinee Mantaranon et al.

POLYMER (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Valorization of Agri-FoodWaste via Fermentation: Production of L-lactic Acid as a Building Block for the Synthesis of Biopolymers

Giovanni Dedenaro et al.

APPLIED SCIENCES-BASEL (2016)

添加到收藏夹

Review Green & Sustainable Science & Technology

Study of the economical and optimum thermal insulation thickness for buildings in a wet and hot tropical climate: Case of Cameroon

Modeste Kameni Nematchoua et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

添加到收藏夹

Article Engineering, Environmental

Foaming of Polylactide in the Presence of Chain Extender

Joanna Ludwiczak et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2015)

添加到收藏夹

Review Polymer Science

Poly (lactic acid) foaming

Mohammadreza Nofar et al.

PROGRESS IN POLYMER SCIENCE (2014)

添加到收藏夹

Article Materials Science, Composites

Preparation and characterization of lignocellulosic material filled polyethylene composite foams

Behzad Kord

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2012)

添加到收藏夹

Review Polymer Science

Processing technologies for poly(lactic acid)

L-T Lim et al.

PROGRESS IN POLYMER SCIENCE (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.