4.6 Article

Preparation of low-cost silicate-based microfiltration membrane: Characterization, membrane fouling mechanism and antifouling performance

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Facile synthesis of oxygen vacancies enriched α-Fe2O3 for peroxymonosulfate activation: A non-radical process for sulfamethoxazole degradation

Qingdong Qin et al.

Summary: This study prepared oxygen vacancies-enriched alpha-Fe2O3 as a catalyst for PMS activation by thermally treating goethite, showing excellent catalytic activity. The concentration of oxygen vacancies was found to be positively correlated with the degradation rate of SMX, with singlet oxygen identified as the predominant reactive oxygen species. The study comprehensively investigated the factors affecting SMX degradation and proposed possible degradation pathways in the alpha-Fe2O3/PMS system.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Chemical

The effect of chain rigidity and microporosity on the sub-ambient temperature gas separation properties of intrinsic microporous polyimides

Wenhui Ji et al.

Summary: The relationship between the rigidity, microporosity, and ideal gas separation properties in polymers of intrinsic microporosity (PIM) is important but understudied. Research comparing two different PIM polymers, PIM-DB-PI and PIM-PI-1, showed that both rigidity and microporosity play key roles in fine-tuning gas transport through polymer membranes. Microporosity has a dominant effect on gas diffusion selectivity, while rigidity primarily impacts the critical diffusion penetrate size of PIM-PI membranes.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Materials Science, Ceramics

Development of high strength, porous mullite ceramic hollow fiber membrane for treatment of oily wastewater

Mohamed Farag Twibi et al.

Summary: A high-strength, porous ceramic hollow fiber membrane derived from mullite-kaolinite powder was successfully fabricated for efficient oil-wastewater separation. The membrane exhibited superhydrophilicity and low cost, making it suitable for various water treatment applications.

CERAMICS INTERNATIONAL (2021)

Article Energy & Fuels

Preparation and characterization of microbubbles with a porous ceramic membrane

B. Q. Xie et al.

Summary: Efficient preparation of microbubbles is important for their wide applications in various industries. A flow system based on commercial porous ceramic membrane was developed for controllable generation and rapid characterization of microbubbles. By adjusting different parameters, microbubbles with diameters ranging from 64 to 87 microns were successfully prepared under optimal conditions.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Review Engineering, Chemical

Organic solvent reverse osmosis membranes for organic liquid mixture separation: A review

Cuijing Liu et al.

Summary: This article provides an overview of the efforts made in the separation of organic liquid mixtures by organic solvent reverse osmosis (OSRO) technology, highlighting its advantages such as high energy-efficiency, sub-nanometer separation characteristics, and potential applications for different mixtures. The energy evaluation of OSRO, comparison with other separation technologies, and comprehensive review of developed membranes are discussed, aiming to inspire future studies in efficient OSRO separations.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Engineering, Chemical

One-step engineering of low-cost kaolin/fly ash ceramic membranes for efficient separation of oil-water emulsions

Dong Zou et al.

Summary: The study utilized fly ash and kaolin to prepare ceramic membranes, with the introduction of alumina particles enhancing the strength of the support layer, leading to successful reduction of raw material costs, sintering energy consumption, and fabrication time.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Engineering, Chemical

Calcium ion-sodium alginate double cross-linked graphene oxide nanofiltration membrane with enhanced stability for efficient separation of dyes

Jing Yu et al.

Summary: This study introduces a simple vacuum-assisted method to prepare a double-crosslinked composite graphene oxide nanofiltration membrane by adding sodium alginate and calcium ions, which significantly improves water flux and dye separation performance.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Catalytic ozonation with silicate-based microfiltration membrane for the removal of iopamidol in aqueous solution

Weiqiang Wang et al.

Summary: A novel flat microfiltration membrane was prepared by the compression method using cement and sucrose as a pore-forming agent for catalytic ozonation of iopamidol (IPM). The membrane structure contained various metal oxides and alkaline hydration products rich in hydroxyl groups. Hydroxyl radicals (center dot OH) were found to play a crucial role in the degradation process of IPM, which included amide hydrolysis, amino oxidation, and dehydrogenation.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Environmental

Combined alginate-humic acid fouling mechanism and mitigation during microfiltration: Effect of alginate viscosity

Dagmar Olafsdottir et al.

Summary: The study found that humic acid can accelerate alginate fouling under both dead-end and crossflow conditions with different filtration mechanisms. Intermittent relaxation during crossflow can alleviate medium viscosity alginate fouling. High temperature clean water flushing is the most effective way to maintain membrane performance.

JOURNAL OF WATER PROCESS ENGINEERING (2021)

Article Materials Science, Ceramics

Synthesis and characterization of mullite-ZrO2 porous fibrous ceramic for highly efficient oil-water separation

Lei Yuan et al.

Summary: The mullite-ZrO2 porous fibrous ceramic fabricated by the aqueous gel-casting method showed high porosity and compressive strength, making it suitable for advanced applications in oil-water separation membranes.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Influence of dextrin content and sintering temperature on the properties of coal fly ash-based tubular ceramic membrane for flue gas moisture recovery

Dehua Liang et al.

Summary: In this study, a high-performance coal fly ash-based tubular ceramic membrane for flue gas moisture recovery was prepared by optimizing the pore-forming agent content and sintering temperature. The membrane exhibited excellent properties and achieved a high moisture recovery ratio and water flux in experimental studies.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Low-temperature sintering of a porous SiC ceramic filter using water glass and zirconia as sintering aids

Qian Jiang et al.

Summary: The study utilized water glass and zirconia as sintering aids to prepare porous SiC ceramic filters, reducing the sintering temperature and improving commercial viability. Addition of water glass and zirconia lowered the sintering temperature to 600 degrees C, resulting in high-performance ceramic filters with excellent properties.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

Fabrication of high permeability SiC ceramic membrane with gradient pore structure by one-step freeze-casting process

Lijuan Huang et al.

Summary: By optimizing the preparation process, the multilayer microstructures, mechanical properties, and filtering performances of freeze-casting SiC ceramic membranes can be controlled. Increasing the solid content narrows the directional pore channels and improves mechanical properties, while increasing coarse particle content thickens separation layers and transition layers to enhance permeability efficiency.

CERAMICS INTERNATIONAL (2021)

Article Environmental Sciences

Improvement of the fabricated and application of aluminosilicate-based microfiltration membrane

Jingyi Sun et al.

Summary: In this study, flat microfiltration membranes were fabricated using aluminosilicate composites, with membrane performance optimized by regulating factors such as particle size of SiO2 and the ratio of SiO2 to aluminosilicate composite. The results showed that controlling these factors effectively enhanced membrane mechanical strength, pore size distribution, and catalytic performance.

CHEMOSPHERE (2021)

Review Green & Sustainable Science & Technology

Recycling food, agricultural, and industrial wastes as pore-forming agents for sustainable porous ceramic production: A review

Siti Zuliana Salleh et al.

Summary: Utilizing food, agricultural, and industrial wastes as pore-forming agents in porous ceramic production can lead to energy saving and green production, significantly impacting the physical, mechanical, and toxicity properties of the resulting porous ceramics, paving the way for sustainable waste management.

JOURNAL OF CLEANER PRODUCTION (2021)

Review Environmental Sciences

Recent developments in porous ceramic membranes for wastewater treatment and desalination: A review

Thanigaivelan Arumugham et al.

Summary: The development of porous ceramic membranes has provided a sustainable and efficient solution for clean water supply, particularly in wastewater treatment and desalination applications. These membranes exhibit excellent properties such as hydrophilicity, low fouling, ease of cleaning, and robust performance in harsh conditions.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Review Engineering, Environmental

Catalytic membrane-based oxidation-filtration systems for organic wastewater purification: A review

Ning Li et al.

Summary: The use of catalytic membranes for wastewater treatment shows great potential in terms of enhanced pollutant removal efficiency and reduced membrane fouling. Different preparation methods and integrated systems are discussed, with a focus on mechanisms, performance, advantages, and challenges for future research and development.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Chemical

Ultrapermeable polymeric membranes based on particular ultra-rigid units for enhanced gas separation

Xiaocui Han et al.

Summary: A series of PIM-EN-x polymers based on spirodifluoranthene (EN) were prepared to improve gas separation performance by increasing gas permeability without sacrificing selectivity. These polymers showed outstanding thermal stability and high BET surface area, with CO2 permeability surpassing previous upper bounds.

JOURNAL OF MEMBRANE SCIENCE (2021)

Review Engineering, Environmental

Ceramic nanocomposite membranes and membrane fouling: A review

Chen Li et al.

WATER RESEARCH (2020)

Review Construction & Building Technology

A state-of-the-art review on the carbonation process in cementitious materials: Fundamentals and characterization techniques

Qiwen Qiu

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Biochemistry & Molecular Biology

Fabrication and Characterization of Ice Templated Membrane Supports from Portland Cement

Amanmyrat Abdullayev et al.

MEMBRANES (2020)

Article Engineering, Environmental

Recovery of lignin from water and methanol using low-cost kaolin based tubular ceramic membrane

Preeti Singh et al.

JOURNAL OF WATER PROCESS ENGINEERING (2020)

Article Engineering, Environmental

New low-cost ceramic microfiltration membrane made from natural magnesite for industrial wastewater treatment

A. Manni et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Article Chemistry, Multidisciplinary

Low-cost ceramic membranes: Synthesis, classifications, and applications

Mansour Issaoui et al.

COMPTES RENDUS CHIMIE (2019)

Article Chemistry, Physical

Efficient degradation of atrazine with porous sulfurized Fe2O3 as catalyst for peroxymonosulfate activation

Han Zheng et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Article Engineering, Chemical

Catalytic ozonation by Si-doped α-Fe2O3 for the removal of nitrobenzene in aqueous solution

Pengwei Yan et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Article Engineering, Chemical

Filtration Performances of Different Polysaccharides in Microfiltration Process

Shujuan Meng et al.

PROCESSES (2019)

Article Engineering, Environmental

New low-cost ultrafiltration membrane made from purified natural clays for direct Red 80 dye removal

H. Ouaddari et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Article Engineering, Environmental

Elaboration and characterization of low-cost ceramic membrane made from natural Moroccan perlite for treatment of industrial wastewater

Souad Saja et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2018)

Article Materials Science, Ceramics

Influence of starch content on the properties of low cost microfiltration membranes

H. Elomari et al.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2017)

Article Chemistry, Multidisciplinary

Effect of carbonates composition on the permeation characteristics of low-cost ceramic membrane supports

Harjot Kaur et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2016)

Article Engineering, Environmental

Dairy wastewater treatment using a novel low cost tubular ceramic membrane and membrane fouling mechanism using pore blocking models

R. Vinoth Kumar et al.

JOURNAL OF WATER PROCESS ENGINEERING (2016)

Article Environmental Sciences

Gas separation using porous cement membrane

Weiqi Zhang et al.

JOURNAL OF ENVIRONMENTAL SCIENCES (2014)

Article Chemistry, Multidisciplinary

Hexagonal Boron Nitride and Graphite Oxide Reinforced Multifunctional Porous Cement Composites

Mohammad A. Rafiee et al.

ADVANCED FUNCTIONAL MATERIALS (2013)

Article Engineering, Environmental

Alginate block fractions and their effects on membrane fouling

Shujuan Meng et al.

WATER RESEARCH (2013)

Article Chemistry, Physical

Pumice-catalyzed ozonation degradation of p-chloronitrobenzene in aqueous solution

Lei Yuan et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2012)

Review Engineering, Chemical

Review of hypotheses for fouling during beer clarification using membranes

R. G. M. van der Sman et al.

JOURNAL OF MEMBRANE SCIENCE (2012)

Article Construction & Building Technology

Mechanisms of cement hydration

Jeffrey W. Bullard et al.

CEMENT AND CONCRETE RESEARCH (2011)

Article Engineering, Biomedical

In vivo bone response to porous calcium phosphate cement

RP del Real et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2003)