4.7 Article

Minimizing the interfacial resistance for a solid-state lithium battery running at room temperature

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Enhanced electrochemical performance enabled by ionic-liquid-coated Na3SbS4 electrolyte encapsulated in flexible filtration membrane

Zhiwen Wang et al.

Summary: A facile preparation method using PVDF filtration membrane and ionic liquid was developed to homogeneously coat BMPTFSI on NSS particles, enhancing the performance and stability of solid electrolyte. This green approach provides a simple way to optimize the interfacial performance for solid state batteries using ionic liquid.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Multidisciplinary Sciences

On the feasibility of all-solid-state batteries with LLZO as a single electrolyte

Kostiantyn Kravchyk et al.

Summary: Replacing liquid-state electrolytes with solid-state counterparts in Li-ion batteries is a major research objective. Among the different solid-state electrolytes, garnet-type Li-ion electrolytes based on LLZO are considered promising candidates, but they still face challenges due to high density and lower ion conductivity compared to liquid electrolytes.

SCIENTIFIC REPORTS (2022)

Article Engineering, Environmental

Composite solid electrolytes containing single-ion lithium polymer grafted garnet for dendrite-free, long-life all-solid-state lithium metal batteries

Mian Liu et al.

Summary: Compared with traditional liquid electrolytes, composite solid electrolytes composed of polymer and inorganic particle fillers exhibit better electrochemical stability and safety in lithium-ion batteries. This study focuses on the development of a flexible anion-immobilized modified ceramic-polymer composite solid electrolyte that significantly increases lithium ion transference number and shows promising performance in all-solid-state batteries. The synthesized garnet-lithium single-ion polymer composite particles have great potential in the next generation of all-solid-state lithium metal batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

Review Chemistry, Multidisciplinary

Interface Issues and Challenges in All-Solid-State Batteries: Lithium, Sodium, and Beyond

Shuaifeng Lou et al.

Summary: This article discusses the interface principles and engineering in all-solid-state batteries, emphasizing the importance of interface physics and chemistry in battery performance, and proposing strategies to address technical challenges.

ADVANCED MATERIALS (2021)

Article Electrochemistry

Composite solid electrolyte comprising poly(propylene carbonate) and Li1.5Al0.5Ge1.5(PO4)(3) for long-life all-solid-state Li-ion batteries

Bong-Joon Sung et al.

Summary: Solid electrolytes have the potential to address safety issues in conventional Lithium-Ion Batteries, with solid polymer electrolytes showing promise due to their film-forming ability and cost-effective fabrication. The CSPE developed in this study, reinforced with LAGP filler, exhibited attractive ionic conductivity and stability, offering new opportunities for the fabrication of all-solid-state LIBs.

ELECTROCHIMICA ACTA (2021)

Article Chemistry, Multidisciplinary

In Situ Polymerization Permeated Three-Dimensional Li+-Percolated Porous Oxide Ceramic Framework Boosting All Solid-State Lithium Metal Battery

Yiyuan Yan et al.

Summary: The integrated strategy proposed in this study can guide the preparation of highly conductive solid electrolytes and compatible interface designs to enhance the performance of practical high-energy-density all solid-state lithium metal batteries.

ADVANCED SCIENCE (2021)

Article Energy & Fuels

Xanthan-Based Hydrogel for Stable and Efficient Quasi-Solid Truly Aqueous Dye-Sensitized Solar Cell with Cobalt Mediator

Simone Galliano et al.

Summary: The study introduces a cobalt-based, jellified aqueous electrolyte with xanthan gum, which achieves an efficiency exceeding 4% in DSSCs. Using design of experiment, the effects of Co2+ concentration, Co2+/Co3+ ratio, and xanthan gum amount modifications on the photovoltaic parameters of lab-scale solar cells were precisely and significantly studied.

SOLAR RRL (2021)

Article Nanoscience & Nanotechnology

Importance of Crystallographic Sites on Sodium-Ion Extraction from NASICON-Structured Cathodes for Sodium-Ion Batteries

Qianchen Wang et al.

Summary: The study compares the extraction/insertion behavior of sodium ions in two isostructural compounds and finds that the voltage of the V5+/V4+ redox couple in partially substituted Na3V2(PO4)3 is lower due to excessive diffusion activation energy.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Facile Design of Sulfide-Based all Solid-State Lithium Metal Battery: In Situ Polymerization within Self-Supported Porous Argyrodite Skeleton

Yantao Wang et al.

Summary: All solid-state batteries have great potential for safe and high-energy electrochemical storage. The ionic conductivity of electrolytes and their compatibility with electrodes are crucial for determining the electrochemical performance of these batteries. By using an integrated strategy that addresses these issues, a high-performance all solid-state lithium metal battery with a LiNi0.8Mn0.1Co0.1O2 cathode has been developed, demonstrating high Coulombic efficiency exceeding 99% at room temperature.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Materials Science, Multidisciplinary

Stabilizing Na3SbS4/Na interface by rational design via Cl doping and aqueous processing

Haonan Cao et al.

Summary: Solution-synthesis method for solid electrolytes is attractive due to its facile and scalable process for permeating electrodes and constructing thin electrolyte coating layers. In this work, Cl-doped Na3SbS4 was prepared via an aqueous-solution approach, showing improved interfacial stability towards Na metal compared to solid-state sintered electrolytes. All-solid-state batteries using solution-prepared electrolytes exhibit enhanced cycling performance, with room for further improvement.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Polymer Science

Nanosponge-Based Composite Gel Polymer Electrolyte for Safer Li-O2 Batteries

Julia Amici et al.

Summary: Li-O-2 batteries have high theoretical energy density but are limited by poor cycling stability and safety issues. Researchers have developed a composite gel polymer electrolyte to address these challenges, with a cross-linked structure and nanosponge to improve ionic conductivity.

POLYMERS (2021)

Review Green & Sustainable Science & Technology

Poly(3,4-ethylenedioxythiophene) in Dye-Sensitized Solar Cells: Toward Solid-State and Platinum-Free Photovoltaics

Lucia Fagiolari et al.

Summary: Dye-sensitized solar cells (DSSCs) are now a reality in the field of hybrid photovoltaics, offering the ability to operate in diffused light conditions and be fabricated in different colors for various applications. Poly(3,4-ethylenedioxythiophene) (PEDOT) is a frequently studied compound for DSSCs, serving as a substitute for liquid electrolytes and platinum in cell fabrication. The literature presents numerous studies on PEDOT, classified based on applications, functionalization/doping strategies, and deposition methods.

ADVANCED SUSTAINABLE SYSTEMS (2021)

Article Polymer Science

Chitosan as a paradigm for biopolymer electrolytes in solid-state dye-sensitised solar cells

Noriah Abdul Rahman et al.

Summary: Biopolymers, specifically chitosan, loaded with NaI salt are explored as a solid polymer electrolyte for dye sensitised solar cells. The chitosan-NaI electrolyte shows promising interactions, weakening chitosan's semi-crystalline domains and enhancing the conduction of redox shuttle ions. The solid-state electrolyte exhibits high ionic conductivity and stable power conversion efficiency for photovoltaic devices.

POLYMER (2021)

Article Chemistry, Multidisciplinary

Lignin-Based Polymer Electrolyte Membranes for Sustainable Aqueous Dye-Sensitized Solar Cells

Juan Carlos de Haro et al.

Summary: This study investigated the use of novel bioderived polymeric membranes in aqueous dye-sensitized solar cells, demonstrating the impact of PEGDGE/lignin ratio on membrane characteristics. The research provides a potential solution for stable aqueous DSSCs.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Physics, Applied

Hunting Sodium Dendrites in NASICON-Based Solid-State Electrolytes

Qiangqiang Zhang et al.

Summary: This study observed the propagation of Na dendrites on NASICON-based solid-state electrolyte (SSE) for the first time and found that the development of a fluorinated amorphous carbon (FAC) interfacial layer on the ceramic surface can effectively suppress Na dendrite formation, enhancing the compatibility between Na metal and SSEs and improving the stability of solid-state sodium batteries.

ENERGY MATERIAL ADVANCES (2021)

Article Physics, Applied

Formation of Stable Interphase of Polymer-in-Salt Electrolyte in All-Solid-State Lithium Batteries

Hongcai Gao et al.

Summary: This study demonstrates an all-solid-state lithium battery based on a polymer-in-salt electrolyte, which features a wide electrochemically stable window, high ionic conductivity, increased lithium-ion transference number, and suppressed dendrite growth from the lithium-metal anode. Additionally, a stable interphase formed between the lithium-metal anode and the polymer-in-salt electrolyte can restrain uncontrolled parasitic reactions.

ENERGY MATERIAL ADVANCES (2021)

Review Physics, Applied

Porous Mixed Ionic Electronic Conductor Interlayers for Solid-State Batteries

So Yeon Kim et al.

Summary: This review discusses the challenges faced by rechargeable solid-state batteries and summarizes recent progress in addressing these issues by incorporating other classes of materials and novel structures. The focus is on providing theoretical explanations on how open nanoporous mixed ion-electron conductor interlayers manipulate beta-phase deposition and stripping behavior to suppress instabilities, with avenues for future design of porous interlayers for SSBs.

ENERGY MATERIAL ADVANCES (2021)

Review Physics, Applied

Advanced Electrode Materials in Lithium Batteries: Retrospect and Prospect

Xin Shen et al.

Summary: This article summarizes the historical developments of practical electrode materials in lithium-ion batteries, discusses the emerging electrode materials for next-generation batteries, and presents the future scenario of high-energy-density rechargeable batteries. The combination of theory and experiment under multiscale is highlighted to promote the development of emerging electrode materials.

ENERGY MATERIAL ADVANCES (2021)

Article Chemistry, Multidisciplinary

Design Strategies to Enable the Efficient Use of Sodium Metal Anodes in High-Energy Batteries

Bing Sun et al.

ADVANCED MATERIALS (2020)

Article Nanoscience & Nanotechnology

Analysis of Interfacial Effects in All-Solid-State Batteries with Thiophosphate Solid Electrolytes

Anton Neumann et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Engineering, Environmental

Facile interfacial adhesion enabled LATP-based solid-state lithium metal battery

Zelin Yang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Materials Science, Ceramics

Structural and electrical properties of ceramic Li-ion conductors based on Li1.3Al0.3Ti1.7(PO4)3-LiF

K. Kwatek et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Article Chemistry, Multidisciplinary

Shaping the Future of Solid-State Electrolytes through Computational Modeling

Ardeshir Baktash et al.

ADVANCED MATERIALS (2020)

Review Chemistry, Multidisciplinary

Progress and Perspective of Ceramic/Polymer Composite Solid Electrolytes for Lithium Batteries

Song Li et al.

ADVANCED SCIENCE (2020)

Review Chemistry, Physical

Electrolytes and Interphases in Sodium-Based Rechargeable Batteries: Recent Advances and Perspectives

Gebrekidan Gebresilassie Eshetu et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Multidisciplinary

Solid Polymer Electrolyte Based on Polymerized Ionic Liquid for High Performance All-Solid-State Lithium-Ion Batteries

Furui Ma et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Review Chemistry, Multidisciplinary

Synthesis and Properties of NaSICON-type LATP and LAGP Solid Electrolytes

Rachel DeWees et al.

CHEMSUSCHEM (2019)

Article Nanoscience & Nanotechnology

Interfacial Stability of Phosphate-NASICON Solid Electrolytes in Ni-Rich NCM Cathode-Based Solid-State Batteries

Takahiro Yoshinari et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Insight into the Microstructure and Ionic Conductivity of Cold Sintered NASICON Solid Electrolyte for Solid-State Batteries

Yulong Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Atomistic Insight into Ion Transport and Conductivity in Ga/Al-Substituted Li7La3Zr2O12 Solid Electrolytes

Fabian A. Garcia Daza et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

Improving Cell Resistance and Cycle Life with Solvate-Coated Thiophosphate Solid Electrolytes in Lithium Batteries

Maria A. Philip et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Nanoscience & Nanotechnology

3D Fiber-Network-Reinforced Bicontinuous Composite Solid Electrolyte for Dendrite-free Lithium Metal Batteries

Dan Li et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Materials Science, Ceramics

Improved conductivity in tape tasted Li-NASICON supported thick films: Effect of temperature treatments and lamination

R. Jimenez et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Article Nanoscience & Nanotechnology

Stabilizing the Interface of NASICON Solid Electrolyte against Li Metal with Atomic Layer Deposition

Yulong Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Nanoscience & Nanotechnology

Highly Conductive Solid-State Hybrid Electrolytes Operating at Subzero Temperatures

Taeyoung Kwon et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Chemistry, Multidisciplinary

Inorganic Solid-State Electrolytes for Lithium Batteries: Mechanisms and Properties Governing Ion Conduction

John Christopher Bachman et al.

CHEMICAL REVIEWS (2016)

Article Chemistry, Multidisciplinary

Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte

Weidong Zhou et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Multidisciplinary Sciences

Mastering the interface for advanced all-solid-state lithium rechargeable batteries

Yutao Li et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

Article Chemistry, Physical

A Sodium-Ion Battery with a Low-Cost Cross-Linked Gel-Polymer Electrolyte

Hongcai Gao et al.

ADVANCED ENERGY MATERIALS (2016)

Article Chemistry, Physical

Synthesis and properties of Al-free Li7-xLa3Zr2-xTaxO12 garnet related oxides

Ryoji Inada et al.

SOLID STATE IONICS (2014)

Article Chemistry, Physical

Correlation between micro-structural properties and ionic conductivity of Li1.5Al0.5Ge1.5(PO4)3 ceramics

Chinnasamy R. Mariappan et al.

JOURNAL OF POWER SOURCES (2011)