4.7 Article

Ultra-stable sodium ion storage of biomass porous carbon derived from sugarcane

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Efficient lithium-ion storage using a heterostructured porous carbon framework and its in situ transmission electron microscopy study

Minjun Kim et al.

Summary: The study presents a heterostructured porous carbon framework composed of rGO nanosheets and MOF-derived microporous carbon, showing efficient lithium-ion storage performance. The unique 3D heterostructure of the PCF can withstand volume expansion, contributing to a deeper understanding of tailored design for future lithium-ion batteries.

CHEMICAL COMMUNICATIONS (2022)

Article Engineering, Environmental

Mussel-tailored carbon fiber/carbon nanotubes interface for elevated interfacial properties of carbon fiber/epoxy composites

Dongliang Wu et al.

Summary: The study investigated the distribution of metal catalyst on carbon fiber surface using the Platform effect of polydopamine (PDA). Through PDA-based carbon coating, directional Carbon nanotubes (CNTs) were grown on high strength carbon fibers, enhancing mechanical properties and developing interface theory of Carbon fiber reinforced plastic (CFRP).

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Boosting the performance of soft carbon negative electrode for high power Na-ion batteries and Li-ion capacitors through a rational strategy of structural and morphological manipulation

Afshin Pendashteh et al.

Summary: A mechanical treatment strategy is proposed to improve the performance of soft carbon materials as negative electrodes in sodium-ion batteries. The study reveals that mechanical treatment at an intermediate stage can significantly change the structure and properties of the carbon matrix. The optimized samples show high initial coulombic efficiency, reversible capacity, and high-rate performance, providing a new approach for developing high-performance soft carbon-based electrodes for energy storage.

ENERGY STORAGE MATERIALS (2022)

Article Nanoscience & Nanotechnology

Effect of Different Nitrogen Configurations on Sodium Storage Properties of Carbon Anodes for Sodium Ion Batteries

Xin Feng et al.

Summary: The study successfully synthesized various nitrogen-doped carbon materials using small molecule polymerization methods and verified their synthesis processes through multiple analysis methods. Among these materials, the NCDCM dominated by pyrrolic N exhibited satisfactory reversible capacity as sodium ion battery anodes, providing a more efficient way to investigate the differences in sodium ion storage behavior of carbon materials with different nitrogen configurations.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Boosting Sodium Storage Performance of Hard Carbon Anodes by Pore Architecture Engineering

Mingquan Liu et al.

Summary: Porous hard carbon anodes with cross-coupled macropore architecture show enhanced Na storage performances, including increased initial Coulombic efficiency, reversible capacity, rate performance, and cycling stability compared to pristine hard carbon with negligible pores. The use of a binder can further optimize the initial Coulombic efficiency. This work provides valuable insights for optimizing the performance of hard carbon anodes through pore engineering, with potential applications in other electrode materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Engineering, Environmental

New strategy for increasing sodium-ion uptake in silicon oxycarbides

Christian Chandra et al.

Summary: By adjusting the synthesis conditions and the C content of SiOC precursors, the SiOC enriched with C- and O-rich SiOxCy phases can deliver high reversible capacity and maintain stability after long-term cycling.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Applied

Sorghum biomass-derived porous carbon electrodes for capacitive deionization and energy storage

Minjun Kim et al.

Summary: Biomass-derived carbons are widely studied as cost-effective energy storage materials with high performance due to their high specific surface area and the effectiveness of strategies like increasing surface area and introducing heteroatom doping. Porous carbon materials derived from sorghum stem show significantly higher specific capacitance after KOH activation, demonstrating their versatility in applications like capacitive deionization. The performance trend observed in both supercapacitors and CDI for all carbon samples is consistent due to the exploitation of carbon material's electrostatic double-layer capacitance behavior.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Article Green & Sustainable Science & Technology

Providing large-scale electricity demand with photovoltaics and molten-salt storage

Jeffrey M. Gordon et al.

Summary: The proposed strategy involves storing excess energy from large-scale low-cost photovoltaic systems as high-temperature heat in molten salts and driving high-efficiency steam turbines to achieve high grid penetration levels. The feasibility is attributed to a significant difference between economic and thermodynamic factors, enabling 80-95% grid penetration without excessive storage capacity.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Chemistry, Physical

Carboxyl-Dominant Oxygen Rich Carbon for Improved Sodium Ion Storage: Synergistic Enhancement of Adsorption and Intercalation Mechanisms

Fei Sun et al.

Summary: In this study, a postengineering method was developed to accurately dope carboxyl groups in a carbon framework, leading to improved Na+ storage properties. Experimental and theoretical analysis showed that the carboxyl groups act as active sites for Na+ adsorption and facilitate diffusion-controlled Na+ insertion, providing new insights for enhancing reversible Na+ storage in carbon materials.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Bismuth oxychloride anchoring on graphene nanosheets as anode with a high relative energy density for potassium ion battery

Liang Ma et al.

Summary: In this study, a BiOCl anchoring on graphene nanosheets composite for KIBs' anode was developed via a simple hydrothermal process, delivering a high reversible specific capacity and low voltage plateau. The introduction of graphene reduced the adsorption energy variation in BiOCl, facilitating K-ion intercalation. The new evaluation method, relative energy density (E-R), considers both the specific capacity and voltage plateau, providing a novel approach for battery performance assessment.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Applied

Insight to defects regulation on sugarcane waste-derived hard carbon anode for sodium-ion batteries

Kaihua Yu et al.

Summary: The combination of pyrolysis treatment and microwave activation successfully controlled the d-interlayer spacing and porosity of bagasse-derived HC materials, enhancing Na+ adsorption and insertion capacity. The results demonstrated a strong correlation between porosity and sloping capacity, with Na+ insertion contributing significantly to the plateau capacity.

JOURNAL OF ENERGY CHEMISTRY (2021)

Review Chemistry, Physical

Boost sodium-ion batteries to commercialization: Strategies to enhance initial Coulombic efficiency of hard carbon anode

Minghao Zhang et al.

Summary: Sodium-ion batteries with hard carbon electrodes have potential for large-scale energy storage due to their low cost and inexhaustible sodium reserves. However, the insufficient initial Coulombic efficiency of hard carbon hinders its practical commercialization, with strategies such as structure modification and electrolyte optimization being effective in improving it.

NANO ENERGY (2021)

Article Chemistry, Physical

Modified bornite materials with high electrochemical performance for sodium and lithium storage

Feng Jiang et al.

Summary: Mineral-derived carbon-coated Cu5FeS4 anode material demonstrates outstanding performance in both sodium-ion and lithium-ion batteries, delivering high reversible capacity and superior long-term cycling performance. This work sheds light on potential energy storage applications for naturally abundant mineral-based materials.

ENERGY STORAGE MATERIALS (2021)

Article Nanoscience & Nanotechnology

KOH-Activated Hollow ZIF-8 Derived Porous Carbon: Nanoarchitectured Control for Upgraded Capacitive Deionization and Supercapacitor

Minjun Kim et al.

Summary: The synergistic effects of hollow nano-architecture and high specific surface area of hollow activated carbons (HACs) were reported to significantly enhance the performance of supercapacitors (SC) and capacitive deionization (CDI). By optimizing nanopore distribution and designing large macropores, significant improvements in capacitance and desalination performance can be achieved.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Engineering, Environmental

V3Se4 embedded within N/P co-doped carbon fibers for sodium/potassium ion batteries

Lihong Xu et al.

Summary: The study synthesized V3Se4/NPCNFs with the assistance of biomass algae as anodes for SIBs and PIBs, showing excellent capacity and cycling performance. The results suggest that N/P co-doping can optimize electron density distribution and enhance ion reaction kinetics.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Effect of Local Atomic Structure on Sodium Ion Storage in Hard Amorphous Carbon

Jiuhui Han et al.

Summary: The study reported quantitative measurements of sodium storage in low-temperature dealloyed hard carbon with a tunable structure, revealing different mechanisms of sodium adsorption and intercalation in various voltage regions. This provides essential insights for designing advanced sodium-ion battery anodes.

NANO LETTERS (2021)

Review Green & Sustainable Science & Technology

A review of technologies and applications on versatile energy storage systems

Ziyu Zhang et al.

Summary: The global energy consumption is undergoing significant changes due to the consumption of non-renewable fossil energy and the emerging global warming issues. Renewable energy is now the focus of energy development, with ESS playing a crucial role in power systems. Various ESS technologies are continuously evolving, requiring comprehensive evaluation of their advantages and disadvantages, with a focus on hybrid ESS to meet complex market demands.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Chemistry, Physical

Re-oxidation reconstruction process of solid electrolyte interphase layer derived from highly active anion for potassium-ion batteries

Liang Ma et al.

Summary: The variation of anion in electrolyte significantly affects the stability of MS-RGO composite for KIBs, with FSI anion improving cycling stability compared to PF anion. The enhanced re-oxidation reconstruction process of SEI layer derived from FSI anion is attributed to the improved electrochemical performance in KIBs.

NANO ENERGY (2021)

Review Physics, Applied

Reviewing the Safe Shipping of Lithium-Ion and Sodium-Ion Cells: A Materials Chemistry Perspective

Ashish Rudola et al.

Summary: This article discusses the safety issues of high energy density lithium-ion and sodium-ion batteries during storage and transportation. While lithium-ion batteries require shipping at 30% SOC or lower, sodium-ion batteries can be safely discharged to 0V. The difference in storage and transportation requirements between the two types of batteries is highlighted, with sodium-ion batteries benefitting from the use of aluminum current collectors for safer transportation.

ENERGY MATERIAL ADVANCES (2021)

Review Multidisciplinary Sciences

Technologies and perspectives for achieving carbon neutrality

Fang Wang et al.

Summary: Global development heavily relies on the overexploitation of natural resources, leading to increased greenhouse gas concentrations and global climate change. Achieving carbon neutrality by 2050 is crucial, requiring reform of production systems to reduce emissions and promote carbon capture. Innovative technologies in renewable energy, food systems, waste valorization, and carbon-negative manufacturing offer solutions to mitigate climate change and support sustainable development.

INNOVATION (2021)

Article Chemistry, Multidisciplinary

Temperature-regulated biomass-derived hard carbon as a superior anode for sodium-ion batteries

Rong-Rong Li et al.

Summary: Hard carbon materials derived from golden berry leaves with a multichannel structure exhibit high initial discharge capacity and coulombic efficiency when carbonized in the temperature range of 1000 to 2000 degrees Celsius. At a carbonization temperature of 2000 degrees Celsius, the specific capacity contribution of the plateau can reach up to 91.11%.

MATERIALS CHEMISTRY FRONTIERS (2021)

Review Chemistry, Multidisciplinary

Untangling the respective effects of heteroatom-doped carbon materials in batteries, supercapacitors and the ORR to design high performance materials

Xin Feng et al.

Summary: Heteroatom-doped carbon materials have been widely studied for various applications such as batteries, supercapacitors, and the oxygen reduction reaction. By controlling the content and types of heteroatom-containing reagents, the physical and chemical properties of the materials can be adjusted to enhance their electrochemical performance. This review comprehensively analyzes the relevant features of HDCMs and provides guidance for the design of more efficient materials.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Co-construction of sulfur vacancies and carbon confinement in V5S8/CNFs to induce an ultra-stable performance for half/full sodium-ion and potassium-ion batteries

Lihong Xu et al.

Summary: The anode materials for sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) are challenging to construct with high energy and long lifespan. Sulfur-defective vanadium sulfide/carbon fiber composites designed through a facile electrospinning method exhibit excellent storage performance and long-term cycling stability for both SIBs and PIBs. The architecture of the materials provides short-range channels, abundant adsorption sites, and enlarged interlayer spacings, resulting in reversible ion storage with low energy barriers and long cycling characteristics.

NANOSCALE (2021)

Article Engineering, Environmental

Extended plateau capacity of phosphorus-doped hard carbon used as an anode in Na- and K-ion batteries

Stevanus Alvin et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Physical

K-Ion Storage Enhancement in Sb2O3/Reduced Graphene Oxide Using Ether-Based Electrolyte

Jinliang Li et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Multidisciplinary

A Yolk-Shell-Structured FePO4 Cathode for High-Rate and Long-Cycling Sodium-Ion Batteries

Zhuangzhuang Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Chemistry, Multidisciplinary

High-Performance Capacitive Deionization by Lignocellulose-Derived Eco-Friendly Porous Carbon Materials

Ting Lu et al.

BULLETIN OF THE CHEMICAL SOCIETY OF JAPAN (2020)

Article Chemistry, Applied

High specific surface area porous graphene grids carbon as anode materials for sodium ion batteries

Hao Zhang et al.

JOURNAL OF ENERGY CHEMISTRY (2019)

Article Nanoscience & Nanotechnology

High-Performance Na-Ion Storage of S-Doped Porous Carbon Derived from Conjugated Microporous Polymers

Yuquan Li et al.

NANO-MICRO LETTERS (2019)

Article Chemistry, Multidisciplinary

A Robust Solid Electrolyte Interphase Layer Augments the Ion Storage Capacity of Bimetallic-Sulfide-Containing Potassium-Ion Batteries

Junpeng Xie et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Multidisciplinary

Heteroatom-Doped Porous Carbon Materials with Unprecedented High Volumetric Capacitive Performance

Huile Jin et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Review Forestry

Lignin pyrolysis reactions

Haruo Kawamoto

JOURNAL OF WOOD SCIENCE (2017)

Review Chemistry, Physical

An Initial Review of the Status of Electrode Materials for Potassium-Ion Batteries

James C. Pramudita et al.

ADVANCED ENERGY MATERIALS (2017)

Review Chemistry, Physical

Carbon Anode Materials for Advanced Sodium-Ion Batteries

Hongshuai Hou et al.

ADVANCED ENERGY MATERIALS (2017)

Article Chemistry, Physical

Correlation Between Microstructure and Na Storage Behavior in Hard Carbon

Biao Zhang et al.

ADVANCED ENERGY MATERIALS (2016)

Article Materials Science, Paper & Wood

Isolation of cellulose nanofibrils from Triodia pungens via different mechanical methods

Nasim Amiralian et al.

CELLULOSE (2015)

Article Chemistry, Multidisciplinary

New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon

Clement Bommier et al.

NANO LETTERS (2015)

Review Chemistry, Multidisciplinary

Advanced Materials for Energy Storage

Chang Liu et al.

ADVANCED MATERIALS (2010)