☆ 4.7 Article

Microwave sintering of dense and lattice 3Y-TZP samples shaped by digital light processing

CERAMICS INTERNATIONAL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Ceramics

Digital light processing stereolithography of zirconia ceramics: Slurry elaboration and orientation-reliant mechanical properties

Bartolomeo Coppola et al.

Summary: Digital Light Processing (DLP) is a promising technique for the preparation of ceramic parts with complex shapes and high accuracy. In this study, Y-TZP slurries were prepared and printed via DLP, and the influence of solid loading and printing direction on the physical and mechanical properties of the sintered parts was investigated. The results showed that the sintered zirconia samples had high relative density, homogeneous structure, and good mechanical properties.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

添加到收藏夹

Article Materials Science, Ceramics

Hybrid microwave sintering of alumina and 3 mol% Y2O3-stabilized zirconia in a multimode cavity-Influence of the sintering cell

Nouhaila Khalile et al.

Summary: This study investigates the effects of different sintering cells on the microstructure and densification of Al2O3 and 3Y-TZP. The sintering cell containing both mullite tube and SiC susceptor results in higher final densities, lower densification temperatures, and better microstructure homogeneity. However, the performance of Al2O3 and 3Y-TZP varies with different sintering cells, which may be attributed to the difference in dielectric properties and the influence of the sintering cell.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Materials Science, Ceramics

Designing alumina-zirconia composites by DLP-based stereolithography: Microstructural tailoring and mechanical performances

Bartolomeo Coppola et al.

Summary: This study successfully prepared alumina-zirconia composites through digital light processing technique, with homogeneous microstructures and good distribution of two phases. The fabricated composites exhibited excellent mechanical properties, showing higher levels of mechanical performance than previous investigations.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Sintering Process Optimization for 3YSZ Ceramic 3D-Printed Objects Manufactured by Stereolithography

Sang Hyun Ji et al.

Summary: By optimizing the drying, debinding, and sintering conditions, this study successfully achieved high strength and density in 3YSZ ceramic 3D-printed objects, expanding their potential applications in various industrial fields.

NANOMATERIALS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of advanced ceramic materials

Y. Lakhdar et al.

Summary: Additive manufacturing has the potential to disrupt the ceramic industry by offering new opportunities to manufacture advanced ceramic components with reduced costs and increased design freedom. Despite slower development compared to other industries, there is considerable interest in developing AM processes capable of producing defect-free, fully dense ceramic components.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Article Materials Science, Ceramics

Evolution of the microstructure and mechanical properties of stereolithography formed alumina cores sintered in vacuum

He Li et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Coupling additive manufacturing and microwave sintering: A fast processing route of alumina ceramics

Hugo Curto et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Preparation and biological evaluation of ZrO2 all-ceramic teeth by DLP technology

Fen Chen et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Advanced ceramic components: Materials, fabrication, and applications

Tunmise Ayode Otitoju et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Forty years after the promise of ⟪ceramic steel?⟫: Zirconia-based composites with a metal-like mechanical behavior

Jerome Chevalier et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Flexural strength and Weibull analysis of Y-TZP fabricated by stereolithographic additive manufacturing and subtractive manufacturing

Yuqing Lu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

3D printing of zirconia via digital light processing: optimization of slurry and debinding process

Jinxing Sun et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing

Keqiang Zhang et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effect of the volume fraction of zirconia suspensions on the microstructure and physical properties of products produced by additive manufacturing

Kyoung-Jun Jong et al.

DENTAL MATERIALS (2019)

添加到收藏夹

Article Materials Science, Ceramics

Development of UV-curable ZrO2 slurries for additive manufacturing (LCM-DLP) technology

Mario Borlaf et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Review Materials Science, Biomaterials

Advances in additive manufacturing for bone tissue engineering scaffolds

Ana Paula Moreno Madrid et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

添加到收藏夹

Article Materials Science, Ceramics

Effect of printing strategies on forming accuracy and mechanical properties of ZrO2 parts fabricated by SLA technology

Xiangsong Fu et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Review Materials Science, Ceramics

3D printing of ceramics: A review

Zhangwei Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Materials Science, Ceramics

Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia

S. Ramesh et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Materials Science, Ceramics

Fully coupled electromagnetic-thermal-mechanical comparative simulation of direct vs hybrid microwave sintering of 3Y-ZrO2

Charles Maniere et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Materials Science, Ceramics

Fractography of zirconia-specimens made using additive manufacturing (LCM) technology

Walter Harrer et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

添加到收藏夹

Review Engineering, Manufacturing

Microwave-material interaction phenomena: Heating mechanisms, challenges and opportunities in material processing

Radha Raman Mishra et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

添加到收藏夹

Review Thermodynamics

A review on the susceptor assisted microwave processing of materials

Madhuchhanda Bhattacharya et al.

ENERGY (2016)

添加到收藏夹

Article Chemistry, Physical

In Situ Monitoring of Microwave Processing of Materials at High Temperatures through Dielectric Properties Measurement

Beatriz Garcia-Banos et al.

MATERIALS (2016)

添加到收藏夹

Article Materials Science, Ceramics

Additive Manufacturing of Dense Alumina Ceramics

Martin Schwentenwein et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2015)

添加到收藏夹

Article Materials Science, Ceramics

Effects of microwave sintering on the properties of porous hydroxyapatite scaffolds

Quan Wu et al.

CERAMICS INTERNATIONAL (2013)

添加到收藏夹

Article Cell & Tissue Engineering

Microwave-sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering

Solaiman Tarafder et al.

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Contactless Monitoring of Shrinkage and Temperature Distribution during Hybrid Microwave Sintering

Daniel Zymelka et al.

ADVANCED ENGINEERING MATERIALS (2011)

添加到收藏夹

Review Chemistry, Physical

Microwave versus conventional sintering: A review of fundamentals, advantages and applications

Morteza Oghbaei et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

添加到收藏夹

Review Materials Science, Ceramics

Densification and microstructure evolution of Y-Tetragonal Zirconia Polycrystal powder during direct and hybrid microwave sintering in a single-mode cavity

Sylvain Charmond et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)

添加到收藏夹

Article Materials Science, Ceramics

The Tetragonal-Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends

Jerome Chevalier et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Stereolithography of structural complex ceramic parts

T Chartier et al.

JOURNAL OF MATERIALS SCIENCE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.