4.7 Article

High temperature abradable sealing coating for SiCf/SiC ceramic matrix composites

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Ceramics

Wear and friction behavior of CrTiN/TiCN and CrTiN/CrCN multilayer composite coatings

Dogus Ozkan et al.

Summary: In this study, multi-layer coatings were deposited on steels using cathodic arc physical vapor deposition. The coatings were characterized using various techniques, and the results showed that CrTiN/CrCN coatings exhibited excellent wear resistance and low friction coefficient under high contact pressures.

CERAMICS INTERNATIONAL (2022)

Article Materials Science, Multidisciplinary

Self-lubricating epoxy-based composite abradable seal coating eliminating adhesive transfer via hierarchical design

Yun-Qi Tong et al.

Summary: This paper presents a novel epoxy-based composite abradable seal coating that eliminates adhesive transfer by changing the scraping pair from metal-to-metal to metal-to-polymer. The coating exhibits self-lubricating properties and thermal conductivity, preventing adhesive transfer during metal blade scraping.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Materials Science, Coatings & Films

A novel reverse-polarity plasma torch with extended hot-wall nozzle for atmospheric plasma spraying of dense yttria-stabilized zirconia coatings

Fangyuan Liu et al.

Summary: This research proposes a novel atmospheric plasma spraying technique using a reverse-polarity plasma torch and extended hot-wall nozzle to prepare dense YSZ ceramic coatings. Experimental and numerical simulation results show that this technique has higher thermal efficiency and lower defects compared to traditional APS process.

SURFACE & COATINGS TECHNOLOGY (2022)

Article Materials Science, Ceramics

Exploring the influences of the counterpart materials on friction and wear behaviors of atmospheric plasma-sprayed YSZ coating

Liuyang Bai et al.

Summary: The sliding wear behaviors of atmospheric plasma-sprayed Yttria Stabilized Zirconia (YSZ) coating mated with different metallic or ceramic counterparts were investigated. It was found that YSZ coatings showed better tribological performances when in contact with Si3N4 and GCr15. The wear debris were more irregular and larger in size in the YSZ coating-Al2O3 and YSZ coating-ZrO2 tribopairs, resulting in severe abrasive wear and brittle fracture of debris particles. The wear of YSZ coating was affected by the flash temperature between the contact surfaces during the rubbing process.

CERAMICS INTERNATIONAL (2022)

Article Materials Science, Multidisciplinary

Lightweight epoxy-based abradable seal coating with high bonding strength

Yun-Qi Tong et al.

Summary: A new lightweight epoxy-based abradable seal coating with high bonding strength was developed through an effective mixing process that controls porosity and distributes spherical pores uniformly. Compared to aluminum-based coatings, this new coating shows superior performance in key indices such as hardness and porosity.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Ceramics

Steam oxidation of ytterbium disilicate environmental barrier coatings with and without a silicon bond coat

Ken A. Kane et al.

Summary: By testing different structures of environmental barrier coatings in high temperature and steam environments, it was found that the silica scale formed by the single layer ytterbium disilicate (YbDS) coating was more uniform, thinner, and exhibited better crack resistance compared to the multilayered coating.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Fabrication and characterization of Yb2Si2O7-based composites as novel abradable sealing coatings

Dandan Qin et al.

Summary: The Yb2Si2O7 combined with hBN system exhibits lower hardness, lower friction coefficient, higher wear rate, and smaller IDR value than the pure Yb2Si2O7 coating, making it suitable for use in ASCs. However, excessive hBN can cause severe wear of the coatings. This study provides guidelines for the development of ASCs suitable for CMCs.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Multidisciplinary

Effect of microstructure evolution and crystal structure on thermal properties for plasma-sprayed RE2SiO5 (RE = Gd, Y, Er) environmental barrier coatings

Xin Zhong et al.

Summary: The research evaluated and compared the microstructure evolution, thermal expansion, thermal conductivity, and thermal shock resistance properties of different oxide coatings, revealing significant changes in coatings under high temperature conditions related to crystal structure and microstructure. The thermal conductivity of thermally aged RE2SiO5 coatings was higher, while coatings with lower thermal expansion coefficient mismatch stresses exhibited better thermal shock resistance.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Materials Science, Ceramics

Application of the pack cementation process on SiC/SiC ceramic matrix composites

T. Koenig et al.

Summary: The potential and limitations of a halide-activated pack cementation process for the development of bond coats on SiC/SiC Ceramic Matrix Composites were investigated. A two-step pack cementation process using chromium and aluminum was proposed to achieve an alumina-forming coating, which protected the fiber-matrix interface from oxidation.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Materials Science, Ceramics

Effect of deposition temperature on phase composition, morphology and mechanical properties of plasma-sprayed Yb2Si2O7 coating

Jingqi Huang et al.

Summary: The phase composition, microstructure, and mechanical properties of ytterbium disilicate coatings fabricated via atmospheric plasma spray at different deposition temperatures were studied. With increased deposition temperature, the crystallinity of the coatings significantly improved. Additionally, the coatings' mechanical properties were notably affected by the phase composition and microstructure.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Chemistry, Physical

Crystallization mechanism of plasma-sprayed LaMgAl11O19 coating

Junbin Sun et al.

APPLIED SURFACE SCIENCE (2020)

Article Materials Science, Multidisciplinary

Microstructure and properties of Al2O3-ZrO2-Y2O3 coatings during high temperature and thermal shock resistance

Wen-Wei Sun et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2020)

Article Materials Science, Coatings & Films

Preparation and Performance of an Abradable NiCrFeAlBN-YSZ-NiCrAl Layered Seal Coating for Aircraft Engines

Xuying Cheng et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2020)

Article Materials Science, Coatings & Films

Study on thermal shock behavior of YSZ abradable sealing coating prepared by mixed solution precursor plasma spraying

X. M. Sun et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Article Materials Science, Multidisciplinary

Degradation of zirconia in moisture

Xueqiang Cao et al.

CORROSION SCIENCE (2020)

Article Materials Science, Ceramics

Yb2Si2O7 Environmental barrier coatings with reduced bond coat oxidation rates via chemical modifications for long life

Kang N. Lee

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Article Chemistry, Physical

Stabilization of a novel mixed solution precursor used for preparing YSZ abradable sealing coatings

Zhe Wang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)

Article Materials Science, Ceramics

Sliding wear characteristics of plasma-sprayed Cr2O3 coatings with incorporation of metals and ceramics

Xiong Yang et al.

CERAMICS INTERNATIONAL (2019)

Article Materials Science, Multidisciplinary

Environmental Barrier Coatings Made by Different Thermal Spray Technologies

Robert Vassen et al.

COATINGS (2019)

Article Materials Science, Ceramics

Effect of processing on high-velocity water vapor recession behavior of Yb-silicate environmental barrier coatings

Emine Bakan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Article Materials Science, Ceramics

Microstructure and thermal cycling behavior of plasma-sprayed LaMgAl11O19 coatings

Junbin Sun et al.

CERAMICS INTERNATIONAL (2018)

Article Chemistry, Physical

Preparation, structure, mechanical properties and thermal cycling behavior of porous LaMgAl11O19 coating

Junbin Sun et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Chemistry, Physical

Effect of heat treatment on microstructure and property of plasma-sprayed lanthanum hexaaluminate coating

Junbin Sun et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Chemistry, Physical

Effect of spraying power on microstructure and property of nanostructured YSZ thermal barrier coatings

Jinshuang Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Materials Science, Coatings & Films

Microstructure and Thermal Properties of Atmospheric Plasma-Sprayed Yb2Si2O7 Coating

Xin Zhong et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)

Article Engineering, Mechanical

Study on the High-Speed Rubbing Wear Behavior Between Ti6Al4V Blade and Nickel-Graphite Abradable Seal Coating

Weihai Xue et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2017)

Article Engineering, Mechanical

The influence of material properties on the wear of abradable materials

N. Fois et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2017)

Article Materials Science, Ceramics

Force transmission and its effect on structural changes in plasma-sprayed lamellar ceramic coatings

Guang-Rong Li et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Article Materials Science, Coatings & Films

Effect of APS process parameters on high-temperature wear behavior of nickel-graphite abradable seal coatings

Reza Soltani et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Article Materials Science, Coatings & Films

YSZ-Polyester Abradable Coatings Manufactured by APS

Delphine Aussavy et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)

Article Materials Science, Multidisciplinary

Response of ytterbium disilicate-silicon environmental barrier coatings to thermal cycling in water vapor

Bradley T. Richards et al.

ACTA MATERIALIA (2016)

Article Materials Science, Multidisciplinary

Fracture mechanisms of ytterbium monosilicate environmental barrier coatings during cyclic thermal exposure

Bradley T. Richards et al.

ACTA MATERIALIA (2016)

Article Materials Science, Ceramics

Stability and CMAS Resistance of Ytterbium-Silicate/Hafnate EBCs/TBC for SiC Composites

David L. Poerschke et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

Article Materials Science, Ceramics

Mechanisms of Ytterbium Monosilicate/Mullite/Silicon Coating Failure During Thermal Cycling in Water Vapor

Bradley T. Richards et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

Article Materials Science, Ceramics

Silica Activity Measurements in the Y2O3-SiO2 System and Applications to Modeling of Coating Volatility

Nathan S. Jacobson

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)

Article Materials Science, Ceramics

Plasma spray deposition of tri-layer environmental barrier coatings

Bradley T. Richards et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

Article Materials Science, Coatings & Films

Tribological Characterization of Plasma-Sprayed CoNiCrAlY-BN Abradable Coatings

E. Irissou et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2014)

Article Materials Science, Coatings & Films

The influence of size and distribution of graphite on the friction and wear behavior of Ni-graphite coatings

J. J. Tang et al.

SURFACE & COATINGS TECHNOLOGY (2014)

Article Materials Science, Coatings & Films

Investigating the anisotropic mechanical properties of plasma sprayed yttria-stabilised zirconia coatings

Andrew Siao Ming Ang et al.

SURFACE & COATINGS TECHNOLOGY (2014)

Article Materials Science, Multidisciplinary

Mechanical and thermal properties of LaMgAl11O19

B. Jiang et al.

MATERIALS RESEARCH BULLETIN (2010)

Article Chemistry, Physical

Nanoindentation examination of yttria-stabilized zirconia (YSZ) crystal

Masaki Fujikane et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2007)

Article Materials Science, Ceramics

High temperature water vapour corrosion of rare earth disilicates (Y,Yb,Lu)(2)Si2O7 in the presence of Al(OH)(3) impurities

N. Maier et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)

Article Materials Science, Coatings & Films

High temperature aging of YSZ coatings and subsequent transformation at low temperature

V Lughi et al.

SURFACE & COATINGS TECHNOLOGY (2005)

Article Materials Science, Ceramics

Ceramic materials for thermal barrier coatings

XQ Cao et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)