4.7 Article

Carbon doped with binary heteroatoms (N,X-C, where X = P, B, or S) derived from polypyrrole for enhanced electromagnetic wave absorption at microwave frequencies

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

A Facile Double-Catalysts Approach to Directionally Fabricate Pyridinic N-B-Pair-Doped Crystal Graphene Nanoribbons/Amorphous Carbon Hybrid Electrocatalysts for Efficient Oxygen Reduction Reaction

Mengmeng Fan et al.

Summary: The double-catalysts strategy of crystal graphene nanoribbons/amorphous carbon doped by pyridinic N-B pairs is presented to enhance the catalytic performance of carbon material for oxygen reduction reaction. The pyridinic N-B pair shows the highest catalytic activity among all the potential configurations.

ADVANCED MATERIALS (2022)

Article Chemistry, Physical

Environmentally friendly bark-derived Co-Doped porous carbon composites for microwave absorption

Jin Cui et al.

Summary: In this study, bark-derived cobalt-doped porous carbon composites for microwave absorption applications were successfully prepared through a simple method, and the microwave absorption performance could be further enhanced by adjusting the carbonization temperature of the bark. The retained channel structures of the bark and dispersed cobalt nanoparticles on the surface played a key role in the excellent microwave absorption performance.

CARBON (2022)

Article Engineering, Environmental

Regulating pyrolysis strategy to construct CNTs-linked porous cubic Prussian blue analogue derivatives for lightweight and broadband microwave absorption

Pengshu Yi et al.

Summary: Innovatively combining the pyrolysis laws of Co-based Prussian blue analogue with the mechanisms of CNTs synthesis catalyzed by Co nanoparticles, CNTs-linked cubic porous PBA derivative (CoCN@CNT) was successfully prepared through a designed pyrolysis process. The obtained sample with a unique morphology and the best microwave absorption performance exhibited an ultra-wideband effective absorption covering the entire Ku radar band at only 20% filling ratio, providing theoretical support for the controllable growth of metal catalyzed CNTs and novel insights for the design and facile synthesis of high-performance micro-nano scale microwave absorbers.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Cage-like eggshell membrane-derived Co-CoxSy-Ni/N,S-codoped carbon composites for electromagnetic wave absorption

Qilin Chang et al.

Summary: Eggshell membrane-derived Co-CoxSy-Ni/N,S-codoped carbon composites were synthesized in a N2 atmosphere, exhibiting remarkable electromagnetic wave absorption performance. The joint source of carbon, N, and S provided by eggshell membrane enabled easy dual atom doping. The composites showed potential for high-performance and low-cost EMW absorbents.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Rational construction of heterogeneous interfaces for bimetallic MOFs-derived/rGO composites towards optimizing the electromagnetic wave absorption

Jialiang Luo et al.

Summary: The rational construction of heterogeneous interfaces is an effective strategy for exploring high-performance electromagnetic wave (EMW) absorption materials. In this study, multicomponent and multidimensional composites were fabricated using a simple solvothermal and pyrolysis process, achieving excellent EMW absorption performances by regulating the content of reduced graphene oxide (rGO) and filler loading. The synergistic effect of increased dielectric loss, impedance matching, and attenuation constant contributes to the superior absorption properties of the composites.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Multidisciplinary

Flexible hierarchical ZnO/AgNWs/carbon cloth-based film for efficient microwave absorption, high thermal conductivity and strong electro-thermal effect

Xiaopeng Han et al.

Summary: Flexible ZnO/carbon cloth (CC@ZnO) films with high microwave absorption performance were prepared, and further coated with silver nanowires to form CC@ZnO/AgNWs/PVA (CAP) films with highly conductive networks. These materials exhibit excellent properties in absorption performance, conductivity, and high-temperature resistance, with potential applications in the protection of wearable electronics.

COMPOSITES PART B-ENGINEERING (2022)

Article Chemistry, Physical

Core-shell CoFe2O4@C nanoparticles coupled with rGO for strong wideband microwave absorption

Xiaoxiao Zhao et al.

Summary: Adjusting the carbon shell thickness in the preparation of multi-element core-shell magnetic nano-particle composite layered graphene absorbing materials resulted in strong microwave absorption and a wide effective absorption bandwidth. The core-shell structure and the materials' properties of graphene and ferrite played a synergistic effect in enhancing the absorption performance of the materials.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Review Chemistry, Multidisciplinary

Dielectric Loss Mechanism in Electromagnetic Wave Absorbing Materials

Ming Qin et al.

Summary: Comprehensive views on dielectric loss mechanisms provide important guidance for understanding the attenuation behavior of materials. Current researches focus more on materials synthesis rather than in-depth mechanism study. Therefore, further research on in-depth mechanisms, emphasis on new dielectric loss mechanisms, and new modulation strategies are needed to achieve simple and effective EM wave attenuation behavior modulation.

ADVANCED SCIENCE (2022)

Article Nanoscience & Nanotechnology

MoP Quantum Dot-Modified N,P-Carbon Nanotubes as a Multifunctional Separator Coating for High-Performance Lithium-Sulfur Batteries

Jianli Zhang et al.

Summary: This study proposes a novel method of using MoP quantum dots and N,P-doped PPy substrates to modify the separator for lithium-sulfur batteries (LSBs). The modified separator exhibits excellent rate capability and cycle performance, as well as good capacity retention and stability under high sulfur loading.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Physical

Pearl necklace-like CoMn-based nanostructures derived from metal-organic frames for enhanced electromagnetic wave absorption

Yuping Wang et al.

Summary: This study presents a novel approach to address the issue of particle agglomeration in Metal-Organic Frameworks (MOFs)-derived magnetic nanostructures by crosslinking ultra-long nanowires. Utilizing CoZn-MOF as a precursor, high-performance functional materials with excellent electromagnetic wave absorption properties were synthesized.

CARBON (2022)

Article Chemistry, Physical

Integrating hierarchical interfacial polarization in yeast-derived Mo2C/C nanoflower/microsphere nanoarchitecture for boosting microwave absorption performance

Zhengchen Wu et al.

Summary: This article introduces a method of integrating hierarchical polarizations into a nanostructure to enhance microwave absorption performance. Researchers have prepared Mo2C@N, P dual-doped carbon microspheres through a simple yeast-template method, which exhibit excellent microwave absorption performance. These achievements have important application prospects for the preparation of porous metals or metal compounds/carbon composites.

CARBON (2022)

Article Chemistry, Physical

The controllable porous structure and s-doping of hollow carbon sphere synergistically act on the microwave attenuation

Xiaomeng Guan et al.

Summary: By successfully doping sulfur into porous hollow carbon spheres, the optimized SPCHS demonstrated excellent absorption properties with a minimum reflection loss of -27.2 dB and an effective bandwidth exceeding 6 GHz at a thickness of 2.25 mm. With a sample filling ratio of only 5 wt% in the paraffin matrix, the SPCHS materials showed great potential in practical applications in EMW absorption.

CARBON (2022)

Article Chemistry, Physical

Magnetic manganese-based composites with multiple loss mechanisms towards broadband absorption

Yue Liu et al.

Summary: This study enhances the electromagnetic wave absorption performance of manganese-based absorbers using the sulfuration and compounding strategies. The resulting composite materials exhibit improved electrical conductivity, magnetic loss, and interfacial polarization. The composites show superior absorption properties compared to the original manganese-based materials, with a low matching thickness and high absorption efficiency.

NANO RESEARCH (2022)

Article Chemistry, Multidisciplinary

Hierarchical Core-Shell Co2N/CoP Embedded in N, P-doped Carbon Nanotubes as Efficient Oxygen Reduction Reaction Catalysts for Zn-air Batteries

Chongchao Yao et al.

Summary: In this study, a novel core-shell ORR catalyst Co2N/CoP@PNCNTs was developed through a simple method, and it was demonstrated to exhibit excellent electrocatalytic activity and long-term stability in alkaline solution. Co2N/CoP@PNCNTs also showed superior electrochemical performance as an air cathode in Zn-air batteries, with high open circuit potential, maximum power density, specific capacity, and negligible voltage decay.
Article Nanoscience & Nanotechnology

Size-Dependent Oxidation-Induced Phase Engineering for MOFs Derivatives Via Spatial Confinement Strategy Toward Enhanced Microwave Absorption

Hanxiao Xu et al.

Summary: A spatial confined growth strategy encapsulating small-size MOFs derivatives into hollow carbon nanocages was proposed, showing significant spatial confinement effect on the crystal size and dielectric polarization. The phase hybridization induced by size-dependent oxidation motion led to satisfying microwave attenuation, with optimal reflection loss and effective bandwidth achieved. The strategy offers a versatile methodology for manipulating the size of MOFs derivatives and optimizing dielectric polarization and microwave attenuation.

NANO-MICRO LETTERS (2022)

Article Green & Sustainable Science & Technology

Solidification of heavy metals in lead smelting slag and development of cementitious materials

Zhongzhong Zhao et al.

Summary: This study explores the effects of different particle sizes of lead smelting slag (LSS) on the compressive strength of cementitious materials. The results show that decreasing the particle size can significantly improve the compressive strength of the materials, especially in the early stage. Analysis of LSS with different particle sizes reveals that decreasing the particle size increases the specific surface areas and decreases the degree of crystallinity. Microscopic analysis of the cementitious materials indicates that decreasing the particle size enhances the degree of reaction and gelation, resulting in a denser structure.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Materials Science, Composites

A seed germination-inspired interface polarization augmentation strategy toward superior electromagnetic absorption performance

Zirui Jia et al.

Summary: Dielectric/magnetic composites are attractive candidates for high-performance electromagnetic wave absorption materials. However, the agglomeration of magnetic nanoparticles in the carbon matrix is a common issue. This study employed a high-temperature carbon nanotube method inspired by seed germination to prevent agglomeration and reinforce interfacial polarization. The resulting composites exhibited strong electromagnetic attenuation ability compared to composites with agglomerated magnetic nanoparticles.

COMPOSITES COMMUNICATIONS (2022)

Article Materials Science, Multidisciplinary

Tunable Co/ZnO/C@MWCNTs based on carbon nanotube-coated MOF with excellent microwave absorption properties

Zirui Jia et al.

Summary: The development of global information technology has led to increased electromagnetic radiation in the surrounding environment, creating a need for high-performance electromagnetic wave absorbers to eliminate electromagnetic pollution. This study presents a method to prepare Co/ZnO/C@MWCNTs composites with excellent electromagnetic loss capability. Experimental results show that at low sample content, the composites exhibit impressive reflection loss and absorption bandwidth.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Article Engineering, Environmental

FeS2@N-C nanorattles encapsulated in N/S dual-doped graphene/carbon nanotube network composites for high performance and high rate capability anodes of sodium-ion batteries

Syam Kandula et al.

Summary: Developing effective anode materials for sodium-ion batteries remains challenging. In this study, a method to synthesize N-doped carbon-coated FeS2 nanorattles was successfully developed, enabling the formation of nanorattle structures and N/S dual-element doping into the G/SWCNT network. The resulting sample exhibited remarkable electrochemical performance as an anode for SIBs.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Multidisciplinary

Heterostructure design of Fe3N alloy/porous carbon nanosheet composites for efficient microwave attenuation

Weihua Gu et al.

Summary: The combination of magnetic/dielectric materials and introduction of porous structure contribute to the optimization of impedance matching property, enhancing microwave absorption capacity. The Fe3N alloy embedded in two-dimensional porous carbon composites fabricated in this study exhibits outstanding microwave absorbing performance.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Chemistry, Physical

Dual heteroatoms co-doping strategy of graphene-based dielectric loss electromagnetic absorbent

Zhihao Sun et al.

Summary: This paper systematically investigates the modulation of microwave absorption performance through diatomic co-doping, demonstrating that NS-rGO and SB-rGO exhibit enhanced impedance matching characteristics and electromagnetic attenuating capability. The results offer deep insight into the relationship among dual atoms co-doping, dielectric performance, and microwave absorption property.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Superior microwave absorbing properties of O, S, N codoped carbon planar helixes via carbonization of polypyrrole spiral nanowires

Minmin Liu et al.

Summary: A simple oxidative polymerization-carbonization strategy was proposed to synthesize O, S, N codoped carbon planar helixes for superior electromagnetic wave absorbers. By adjusting the sintering temperature, the properties of the carbonized products could be modified.

CARBON (2021)

Article Engineering, Environmental

Porous N, B co-doped carbon nanotubes as efficient metal-free electrocatalysts for ORR and Zn-air batteries

Peng Wei et al.

Summary: This study introduces a solid-phase route to prepare porous nitrogen and boron co-doped carbon nanotubes catalysts, demonstrating superior catalytic performance in both acidic and alkaline electrolytes. The catalyst also shows high operating voltage and peak power density in Zn-air batteries, showcasing comparable electrocatalytic performance to commercial Pt/C catalyst.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Polymer Science

Polypyrrole-Based Composite Materials for Electromagnetic Wave Absorption

Jing Yan et al.

Summary: With the advancement of electronic communication technology, the need for electromagnetic wave absorbing materials has increased. Polypyrrole (PPy), a type of conductive polymer, has attracted attention for its excellent properties in electromagnetic wave absorption applications, and various PPy-based composite materials have been widely reported in literature.

POLYMER REVIEWS (2021)

Review Nanoscience & Nanotechnology

A Review on Metal-Organic Framework-Derived Porous Carbon-Based Novel Microwave Absorption Materials

Zhiwei Zhang et al.

Summary: The development of microwave absorption materials (MAMs) is crucial due to the threat electromagnetic waves pose to human health. Metal-organic frameworks (MOFs) have been highly studied for their diverse properties and ability to transform into porous carbon (PC). Researchers are exploring ways to improve absorption performance by coupling MOFs with other materials.

NANO-MICRO LETTERS (2021)

Article Chemistry, Physical

Magnetic porous N-doped carbon composites with adjusted composition and porous microstructure for lightweight microwave absorbers

Panbo Liu et al.

Summary: This study reported the fabrication of metal porous N-doped carbon absorbers using a coordination assembly strategy, which demonstrated excellent absorption performance through structure design and composition control.

CARBON (2021)

Article Engineering, Environmental

Multi-heteroatom-doped hollow carbon tubes as robust electrocatalysts for the oxygen reduction reaction, oxygen and hydrogen evolution reaction

Zhangjian Li et al.

Summary: In this study, a self-sacrifice template engineering strategy was used to develop N, S co-doped carbon tube catalyst, which possesses rich active sites and favorable mass transfer advantage, demonstrating excellent performance in oxygen reduction and hydrogen evolution reactions.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

High-performance electromagnetic wave absorption of FeNi/N, S-codoped carbon composites in 2-40 GHz

Cuiping Li et al.

Summary: The FeNi/nitrogen, sulfur-codoped carbon composite demonstrated superior electromagnetic wave absorption performance, with a strong reflection loss and broad effective absorption bandwidth, attributed to the synergistic effects of magnetic and dielectric losses, along with various other polarization mechanisms and interface characteristics.

CARBON (2021)

Review Energy & Fuels

Construction of heteroatom-doped and three-dimensional graphene materials for the applications in supercapacitors: A review

Zesheng Li et al.

Summary: This review systematically discusses the preparation methods of heteroatom-doped 3-D graphene materials and their applications in supercapacitors, emphasizing their advantages and design principles for providing theoretical guidance in future practical applications.

JOURNAL OF ENERGY STORAGE (2021)

Article Chemistry, Physical

Prussian blue analogue derived carbon-based composites toward lightweight microwave absorption

Xiaohui Liang et al.

Summary: Different carbon-based composites derived from metal organic frameworks (MOFs) have shown significant tuning effects on microwave absorption through various annealing atmospheres, demonstrating excellent performance under different thicknesses. These composites have promising applications due to their strong microwave attenuation capability and broad effective absorption bandwidth.

CARBON (2021)

Article Materials Science, Multidisciplinary

Experimental design and theoretical evaluation of nitrogen and phosphorus dual-doped hierarchical porous carbon for high-performance sodium-ion storage

Chen Chen et al.

Summary: In this study, nitrogen and phosphorus co-doped porous carbon was prepared using starch and ammonium polyphosphate as raw materials, and applied as the anode for sodium-ion batteries, achieving excellent electrochemical performance. By doping nitrogen and phosphorus elements, the adsorption capacity of the carbon material was enhanced, and the diffusion barrier of sodium ions was reduced, providing a new research direction for heteroatom doping and carbon material modification.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

Article Engineering, Electrical & Electronic

Boron-doped helical carbon nanotubes: lightweight and efficient microwave absorbers

Xing Zhang et al.

Summary: Boron-doped helical carbon nanotubes (B-HCNTs) were synthesized by annealing HCNTs with boric oxide, maintaining the morphology and structure of HCNTs. The B-HCNTs exhibited excellent electromagnetic wave absorption, with optimal reflection loss and absorption bandwidth values of -47.86 dB and 3.20 GHz, respectively. The quick and straightforward synthesis process, along with the promising properties of excellent chemical stability and low density, make B-HCNTs a potential candidate for lightweight and efficient microwave absorbers.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Article Engineering, Electrical & Electronic

Hydrothermal synthesis of nitrogen-doped graphene as lightweight and high-efficient electromagnetic wave absorbers

Wei Feng et al.

Summary: This study successfully fabricated nitrogen-doped graphene using a hydrothermal method and found that it exhibits good electromagnetic wave absorption performance, making it a suitable candidate for lightweight dielectric materials.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Review Materials Science, Multidisciplinary

Research progress on carbon-based materials for electromagnetic wave absorption and the related mechanisms

Wang Yang et al.

Summary: With the advancement of electronic information technology, the utilization of microwaves in military and civilian applications is increasing, leading to global concerns about electromagnetic radiation pollution. Carbon-based materials show great potential in electromagnetic wave absorption due to their lightweight, high attenuation ability, large specific surface area, and excellent physicochemical stability.

NEW CARBON MATERIALS (2021)

Article Chemistry, Physical

Engineering defects in 2D g-C3N4 for wideband, efficient electromagnetic absorption at elevated temperature

Hualiang Lv et al.

Summary: This study demonstrates that doping phosphorus and sulfur atoms into nanoporous g-C3N4 can significantly enhance its electromagnetic absorption performance over a wide frequency range, especially at high temperatures.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

Recent progress of microwave absorption microspheres by magnetic-dielectric synergy

Lei Wang et al.

Summary: The research focus is on magnetic-dielectric MA materials due to their unique functions and synergy loss mechanism, covering important research progress, functional materials, development challenges, and design principles.

NANOSCALE (2021)

Article Engineering, Environmental

Prism-shaped hollow carbon decorated with polyaniline for microwave absorption

Xiang Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Multidisciplinary

NiCo2O4 constructed by different dimensions of building blocks with superior electromagnetic wave absorption performance

Hongjing Wu et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Materials Science, Multidisciplinary

Nitrogen-doped carbon nanofibers with sulfur heteroatoms for improving microwave absorption

Yuliang Jiang et al.

JOURNAL OF MATERIALS SCIENCE (2020)

Review Chemistry, Multidisciplinary

Polymer-Derived Heteroatom-Doped Porous Carbon Materials

Hong Wang et al.

CHEMICAL REVIEWS (2020)

Article Chemistry, Physical

Promotion of electrocatalytic nitrogen reduction reaction on N-doped porous carbon with secondary heteroatoms

Jin-Tao Ren et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Review Chemistry, Physical

Sustainable wood-based composites for microwave absorption and electromagnetic interference shielding

Ming Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Review Nanoscience & Nanotechnology

Biomass-Derived Porous Carbon-Based Nanostructures for Microwave Absorption

Huanqin Zhao et al.

NANO-MICRO LETTERS (2019)

Review Chemistry, Multidisciplinary

Electromagnetic Response and Energy Conversion for Functions and Devices in Low-Dimensional Materials

Mao-Sheng Cao et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Review Engineering, Electrical & Electronic

A review of metal oxide-related microwave absorbing materials from the dimension and morphology perspective

Tianqi Hou et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Article Chemistry, Physical

One-pot synthesis of Fe/N/S-doped porous carbon nanotubes for efficient oxygen reduction reaction

Zhong Tan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Multidisciplinary

A Voltage-Boosting Strategy Enabling a Low-Frequency, Flexible Electromagnetic Wave Absorption Device

Hualiang Lv et al.

ADVANCED MATERIALS (2018)

Article Engineering, Environmental

Design of carbon sphere/magnetic quantum dots with tunable phase compositions and boost dielectric loss behavior

Guanglei Wu et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Chemistry, Multidisciplinary

Lightweight and High-Performance Microwave Absorbing Heteroatom-Doped Carbon Derived from Chicken Feather Fibers

Sandeep Kumar Singh et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Chemistry, Multidisciplinary

CoNi@SiO2@TiO2 and CoNi@Air@TiO2 Microspheres with Strong Wideband Microwave Absorption

Qinghe Liu et al.

ADVANCED MATERIALS (2016)

Article Nanoscience & Nanotechnology

Constructing Uniform Core-Shell PPy@PANI Composites with Tunable Shell Thickness toward Enhancement in Microwave Absorption

Chunhua Tian et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Materials Science, Ceramics

Effects of diameter and hollow structure on the microwave absorption properties of short carbon fibers

Zengyong Chu et al.

CERAMICS INTERNATIONAL (2012)

Article Polymer Science

Microtubules of polyaniline as new microwave absorbent materials

MX Wan et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2001)