☆ 4.7 Article

Cold sintering of SiC ceramics with the assistance of amorphous SiO2 surface layer

CERAMICS INTERNATIONAL (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Ceramics

Cold sintering of the Mg-C-O-H system

Keitaro Yamaguchi et al.

Summary: The cold sintering process allows carbonates and hydroxides to harden at temperatures below their decomposition temperatures, and can achieve densification for substances like magnesium hydroxide and basic magnesium carbonate in the Mg-C-O-H system, resulting in hardened bodies with high compressive strength.

CERAMICS INTERNATIONAL (2022)

添加到收藏夹

Article Materials Science, Ceramics

Enhancement of densification and microwave dielectric properties in LiF ceramics via a cold sintering and post-annealing process

Bing Liu et al.

Summary: In this study, a cold sintering process was used to pre-densify LiF ceramics, leading to significant grain growth and an increase in relative density to 92% after post-annealing treatments. The microwave quality factor (Qf) was greatly improved and reached a maximum of 110,800 GHz, making cold sintered LiF a promising component in low temperature co-fired ceramic formulations.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Cold sintering of microwave dielectric ceramics and devices

Dawei Wang et al.

Summary: MW dielectric ceramics are essential for electronic components in wireless communication systems, but traditional high-temperature sintering methods limit their integration with other materials. Cold sintering, a process at lower temperatures, offers energy-efficient densification and better compatibility with diverse materials. Current research focuses on improving cold-sintered MW materials and devices, addressing challenges like unclear mechanisms and poor mechanical properties.

JOURNAL OF MATERIALS RESEARCH (2021)

添加到收藏夹

Article Materials Science, Ceramics

Cold sintered, temperature-stable CaSnSiO5-K2MoO4 composite microwave ceramics and its prototype microstrip patch antenna

Yuping Ji et al.

Summary: Composite ceramics of (1-x)wt%CaSnSiO5-xwt%K2MoO4 were fabricated by cold sintering process, where X-ray diffraction, Energy dispersive X-ray, and Raman spectroscopy confirmed the coexistence of CSSO and KMO without intermediate phases. With an increase in KMO weight fraction, the microwave performance of the ceramic composites improved.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of reaction-bonded B4C-SiC composites

Rong-zhen Liu et al.

Summary: Reaction-bonded B4C-SiC composites show promising potential for advanced technological applications. The microstructure evolution mechanism of these composites was investigated by fabricating B4C-SiC composites through Si-melt infiltration. The mechanical properties, microstructure, and phase evolution were found to be influenced by sintering time and B4C content, with increasing temperature and time leading to reduced unreacted B4C and improved hardness.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

添加到收藏夹

Article Materials Science, Ceramics

Hydrated precursor-assisted densification of hydroxyapatite and its composites by cold sintering

Ning Guo et al.

Summary: Densification of hydroxyapatite was achieved through cold sintering at temperatures below 200 ℃ with CaHPO4.2H2O as an additive. The influence of CaHPO4.2H2O content and temperature on the relative density of cold-sintered HA was investigated, with the elastic modulus, compressive strength, and flexural strength of the specimens slightly inferior to conventionally sintered dense HA. This strategy of densifying target products from their hydrated precursors presents a promising avenue for the development of cold sintering process.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

5G microstrip patch antenna and microwave dielectric properties of cold sintered LiWVO6-K2MoO4 composite ceramics

Mingtao Ma et al.

Summary: This paper successfully prepared (1-x)LWVO-xKMO composite ceramics with high relative density. These composite ceramics exhibit different relative permittivity, microwave quality factor, and temperature coefficient of resonant frequency. A prototype microstrip patch antenna designed and manufactured based on the 30 wt%LWVO-70 wt%KMO composite ceramic showed excellent performance.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

Structure and electrical properties of cold sintered 8mol% scandia stabilized zirconia ceramics

Chao Shi et al.

Summary: High-performance ScSZ ceramics were successfully prepared at low temperature using the cold sintering process (CSP) associated with post-heat-treatment (PHT). The relative density and electrical conductivity of the ceramics exceeded those prepared by conventional sintering methods at higher temperatures. This study demonstrates that CSP is a promising method for preparing high-performance ScSZ ceramics at reduced temperature.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Ceramics

High quality factor cold sintered LiF ceramics for microstrip patch antenna applications

Bing Liu et al.

Summary: Cold sintering technique was used to pre-densify LiF ceramics, achieving high relative density and excellent microwave dielectric properties under high pressure conditions, providing a potential solution for applications in the field of microwave communication.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Review Materials Science, Ceramics

The cold sintering process: A review on processing features, densification mechanisms and perspectives

Anna Galotta et al.

Summary: Cold sintering process (CSP) has gained global attention for its environmentally friendly and innovative fabrication route, reducing processing time, energy, and costs significantly. The process densifies ceramic powder with the aid of a liquid phase under intense pressure and limited heating conditions, achieving extraordinary results. The review explores processing features, possible densification mechanisms, and challenges, paving the way for new processing opportunities in the future.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Cold Sintering: An Energy-Efficient Process for the Development of SrFe12O19-Li2MoO4 Composite-Based Wide-Bandwidth Ferrite Resonator Antenna for Ku-Band Applications

Athira Rajan et al.

Summary: A sustainable cold-sintering process was used to fabricate SrFe12O19-Li2MoO4 composites, which showed improved density and real permittivity with increasing Li2MoO4 content. XRD analysis and microstructure observations confirmed these trends.

ACS APPLIED ELECTRONIC MATERIALS (2021)

添加到收藏夹

Article Materials Science, Ceramics

A theoretical analysis of cold sintering

Mattia Biesuz et al.

ADVANCES IN APPLIED CERAMICS (2020)

添加到收藏夹

Review Materials Science, Ceramics

A review of cold sintering processes

Salvatore Grasso et al.

ADVANCES IN APPLIED CERAMICS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Cold sintering of ceramics and glasses: A review

Cekdar Vakifahmetoglu et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2020)

添加到收藏夹

Article Materials Science, Ceramics

Direct Integration of Cold Sintered, Temperature-Stable Bi2Mo2O9-K2MoO4 Ceramics on Printed Circuit Boards for Satellite Navigation Antennas

Dawei Wang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Cold sintering process of ZnO ceramics: Effect of the nanoparticle/microparticle ratio

Aida Serrano et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Ceramics

Grain size effect on microwave dielectric properties of Na2WO4 ceramics prepared by cold sintering process

Jianyu Hao et al.

CERAMICS INTERNATIONAL (2020)

添加到收藏夹

Article Materials Science, Ceramics

Cold sintered LiMgPO4 based composites for low temperature co-fired ceramic (LTCC) applications

Dawei Wang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Anisothermal densification kinetics of the cold sintering process below 150 °C

Sun Hwi Bang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

添加到收藏夹

Article Materials Science, Ceramics

Mechanism studies of hydrothermal cold sintering of zinc oxide at near room temperature

Xiaoyu Kang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Chemistry, Physical

Temperature Stable Cold Sintered (Bi0.95Li0.05)(V0.9Mo0.1)O4-Na2Mo2O7 Microwave Dielectric Composites

Dawei Wang et al.

MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Cold-Sintered C0G Multilayer Ceramic Capacitors

Dawei Wang et al.

ADVANCED ELECTRONIC MATERIALS (2019)

添加到收藏夹

Article Materials Science, Ceramics

Nano-to-macroporous TiO2 (anatase) by cold sintering process

Valentina Medri et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Materials Science, Ceramics

Sintering mechanisms and dielectric properties of cold sintered (1-x) SiO2 - x PTFE composites

Arnaud Ndayishimiye et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Materials Science, Ceramics

Comparing hydrothermal sintering and cold sintering process: Mechanisms, microstructure, kinetics and chemistry

Arnaud Ndayishimiye et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microwave Dielectric Properties of (1-x) Li2MoO4-xMg2SiO4 Composite Ceramics Fabricated by Cold Sintering Process

Yuping Ji et al.

FRONTIERS IN MATERIALS (2019)

添加到收藏夹

Article Materials Science, Ceramics

Preparation of Na0.5Bi0.5TiO3 ceramics by hydrothermal-assisted cold sintering

HuanQi Huang et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical strength of cold-sintered zinc oxide under biaxial bending

Sarah Lowum et al.

JOURNAL OF MATERIALS SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

High quality factor cold sintered Li2MoO4-BaFe12O19 composites for microwave applications

Sinan S. Faouri et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Ceramics

Low temperature pressureless sintering of silicon carbide ceramics with alumina-yttria-magnesia-calcia

Hyun-Min Kim et al.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2019)

添加到收藏夹

Article Materials Science, Ceramics

Chelate complex assisted cold sintering for spinel ceramics

Shuichi Funahashi et al.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unveiling the mechanisms of cold sintering of ZnO at 250 degrees C by varying applied stress and characterizing grain boundaries by Kelvin Probe Force Microscopy

J. Gonzalez-Julian et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Sintering Temperature on Density and Mechanical Properties of Solid-State Sintered Silicon Carbide Ceramics and Evaluation of Failure Origin

Dulal Chandra Jana et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

添加到收藏夹

Review Chemistry, Physical

Development of the cold sintering process and its application in solid-state lithium batteries

Yulong Liu et al.

JOURNAL OF POWER SOURCES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cold-Sintered Temperature Stable Na0.5Bi0.5MoO4-Li2MoO4 Microwave Composite Ceramics

Dawei Wang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent Progress in Applications of the Cold Sintering Process for Ceramic-Polymer Composites

Jing Guo et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

添加到收藏夹

Article Materials Science, Ceramics

Demonstration of the cold sintering process study for the densification and grain growth of ZnO ceramics

Shuichi Funahashi et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Cold sintering: Current status and prospects

Jon-Paul Maria et al.

JOURNAL OF MATERIALS RESEARCH (2017)

添加到收藏夹

Article Materials Science, Ceramics

Cold sintering process for 8 mol%Y2O3-stabilized ZrO2 ceramics

Hanzheng Guo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Materials Science, Ceramics

Microwave dielectric properties of mineral sillimanite obtained by conventional and cold sintering process

I. J. Induja et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Geologically-inspired strong bulk ceramics made with water at room temperature

Florian Bouville et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Materials Science, Ceramics

Fabrication and optimization of a clay-bonded SiC flat tubular membrane support for microfiltration applications

Syed Zaighum Abbas Bukhari et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Article Materials Science, Ceramics

Cold Sintering Process: A Novel Technique for Low-Temperature Ceramic Processing of Ferroelectrics

Hanzheng Guo et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)

添加到收藏夹

Article Materials Science, Ceramics

Additive-free hot-pressed silicon carbide ceramics-A material with exceptional mechanical properties

P. Sajgalik et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

添加到收藏夹

Article Materials Science, Ceramics

Preparation of reaction-bonded porous silicon carbide with denser surface layer in one-pot process

Akihiro Shimamura et al.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2015)

添加到收藏夹

Article Materials Science, Ceramics

Oxidation Transitions for SiC Part I. Active-to-Passive Transitions

Nathan Jacobson et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2013)

添加到收藏夹

Article Materials Science, Ceramics

Effect of aluminum source on flexural strength of mullite-bonded porous silicon carbide ceramics

B. V. Manoj Kumar et al.

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.