相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Flexural strength and fatigue properties of interfacial transition zone at the microscale
Yidong Gan et al.
CEMENT & CONCRETE COMPOSITES (2022)
Unloading and reloading stress-strain relationship of recycled aggregate concrete reinforced with steel/polypropylene fibers under uniaxial low-cycle loadings
Changqing Wang et al.
CEMENT & CONCRETE COMPOSITES (2022)
Chelate effect on fiber surface morphology and its benefits on pullout and tensile behaviors of ultra-high-performance concrete
Doo-Yeol Yoo et al.
CEMENT & CONCRETE COMPOSITES (2021)
Effect of the roughness of steel fibre surface on its wettability and the cement paste close to fibre surface
Anna Antonova et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Post-peak behaviour of rocks under cyclic loading using a double-criteria damage-controlled test method
Roohollah Shirani Faradonbeh et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2021)
Achieving slip-hardening behavior of sanded straight steel fibers in ultra-high-performance concrete
Booki Chun et al.
CEMENT & CONCRETE COMPOSITES (2020)
Enhancing the rate dependent fiber/matrix interfacial resistance of ultra-high-performance cement composites through surface abrasion
Doo-Yeol Yoo et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Phase contrast tomography to study near-field effects of polypropylene fibres on hardened cement paste
Marika Eik et al.
CEMENT & CONCRETE COMPOSITES (2020)
Twofold normalization of the cyclic creep curve of plain and steel-fiber reinforced concrete and its application to predict fatigue failure
S. Blason et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Interfacial bond characteristics of steel fibers embedded in cementitious composites at high rates
Jun Kil Park et al.
CEMENT AND CONCRETE RESEARCH (2019)
Interfacial microstructure and bond strength of nano-SiO2 -coated steel fibers in cement matrix
Zhenyu Pi et al.
CEMENT & CONCRETE COMPOSITES (2019)
Roughness of Steel Fibre and Composition of Cement Paste Close to Fibre Surface
Marika Eik et al.
JOURNAL OF ADVANCED CONCRETE TECHNOLOGY (2019)
Cyclic and Fatigue Behaviour of Rock Materials: Review, Interpretation and Research Perspectives
B. Cerfontaine et al.
ROCK MECHANICS AND ROCK ENGINEERING (2018)
The pull-out behavior of straight and hooked-end steel fiber from hybrid fiber reinforced cementitious composite: Experimental study and analytical modelling
Fangqian Deng et al.
COMPOSITE STRUCTURES (2018)
Pullout behavior of straight and hooked-end steel fibers in UHPC matrix with various embedded angles
Jianan Qi et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Influence of the fiber content on the compressive low-cycle fatigue behavior of self-compacting SFRC
Elisa Poveda et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Influence of nanoparticles additions on the bond between steel fibres and the binding paste
R. N. F. Carmo et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Fiber pullout behavior of HPFRCC: Effects of matrix strength and fiber type
Doo-Yeol Yoo et al.
COMPOSITE STRUCTURES (2017)
Experimental investigation on the stress-strain behavior of steel fiber reinforced concrete subjected to uniaxial cyclic compression
Biao Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Time-dependent pull-out behaviour of hooked-end steel fibres in concrete
Pieter Daniel Nieuwoudt et al.
CEMENT & CONCRETE COMPOSITES (2017)
Fiber-Matrix Interactions in Fiber-Reinforced Concrete: A Review
Yassir M. Abbas et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2016)
Fiber reinforced mortar affected by alkali-silica reaction: synchrotron microtomography
Daniel Hernandez-Cruz et al.
CEMENT & CONCRETE COMPOSITES (2016)
Influence of silica fume content on microstructure development and bond to steel fiber in ultra-high strength cement-based materials (UHSC)
Zemei Wu et al.
CEMENT & CONCRETE COMPOSITES (2016)
Effect of loading rates on pullout behavior of high strength steel fibers embedded in ultra-high performance concrete
Man Xu et al.
CEMENT & CONCRETE COMPOSITES (2016)
Mechanisms of interfacial bond in steel and polypropylene fiber reinforced geopolymer composites
Navid Ranjbar et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Porosity generation arising from steel fibre in concrete
Jun Pil Hwang et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Experimental investigation on mechanical damage characteristics of sandstone under triaxial cyclic loading
Sheng-Qi Yang et al.
GEOPHYSICAL JOURNAL INTERNATIONAL (2015)
Analytical Model for the Pullout Behavior of Straight and Hooked-End Steel Fibers
Y. Zhan et al.
JOURNAL OF ENGINEERING MECHANICS (2014)
The effect of fibre chemical treatment on the steel fibre/cementitious matrix interface
D. V. Soulioti et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Crack growth in Westerly granite during a cyclic loading test
Youqing Chen et al.
ENGINEERING GEOLOGY (2011)
Study of interfacial microstructure, fracture energy, compressive energy and debonding load of steel fiber-reinforced mortar
Siaw Foon Lee et al.
MATERIALS AND STRUCTURES (2011)
Predicting the pullout response of inclined straight steel fibers
F. Laranjeira et al.
MATERIALS AND STRUCTURES (2010)
Application of nanoindentation testing to study of the interfacial transition zone in steel fiber reinforced mortar
Xiao Hui Wang et al.
CEMENT AND CONCRETE RESEARCH (2009)
Shear Fatigue Micromechanics of the Cement-Bone Interface: An In Vitro Study Using Digital Image Correlation Techniques
Kenneth A. Mann et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2009)
The evolution of elastic moduli with increasing crack damage during cyclic stressing of a basalt from Mt. Etna volcano
M. J. Heap et al.
TECTONOPHYSICS (2009)
Cyclic constitutive model for concrete
Jose Fernando Sima et al.
ENGINEERING STRUCTURES (2008)
The interfacial transition zone (ITZ) between cement paste and aggregate in concrete
KL Scrivener et al.
INTERFACE SCIENCE (2004)
分享论文
