☆ 4.7 Article

The effect of eco-friendly chemical treatment on sisal fiber and its epoxy composites: thermal, mechanical, tribological and morphological properties

CELLULOSE (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Polylactic acid and polyhydroxybutyrate coating on hemp fiber: Its effect on hemp fiber reinforced epoxy composites performance

Sudhakar Behera et al.

Summary: This research investigates the influence of biodegradable polymer coatings on hemp fiber and hemp fiber reinforced epoxy composites. The results show that the coatings improve the surface roughness and crystallinity of the fibers, enhancing the interfacial adhesion with the epoxy matrix. The coatings also improve the mechanical and tribological properties of the composites.

JOURNAL OF COMPOSITE MATERIALS (2022)

添加到收藏夹

Article Polymer Science

Effect of alkali treatment and coupling agent on thermal and mechanical properties of Opuntia ficus-indica cladodes fibers reinforced HDPE composites

Anass Ait Benhamou et al.

Summary: In this study, Opuntia ficus-indica fibers were used as natural reinforcement in high-density polyethylene matrix, with alkali treatment and use of coupling agent SEBS-g-MA to improve interfacial adhesion. The alkali treatment was found to enhance hardness and Young's modulus properties, while the coupling agent increased plasticity and thermal stability of the composites.

POLYMER BULLETIN (2022)

添加到收藏夹

Article Materials Science, Textiles

Dry Sliding Wear Behavior of Chemically Treated Sisal Fiber Reinforced Epoxy Composites

Sudhakar Behera et al.

Summary: The research investigated the effect of fiber surface treatment on sisal fibers and their epoxy composites, showing improvements in surface roughness, crystallinity, and thermal stability of chemically treated fibers. The wear resistance of chemically modified SFREC was increased compared to untreated SFREC, with the best wear properties demonstrated by alkali-treated SFREC. Applied load and sliding distance were observed to have the most defining effect on wear volume loss of SFREC according to ANOVA findings.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Materials Science, Composites

Effectiveness of Sodium Acetate Treatment on the Mechanical Properties and Morphology of Natural Fiber-Reinforced Composites

Dionisio Badagliacco et al.

Summary: This study investigates the ability of an eco-friendly and cheap treatment based on sodium acetate solutions to improve the mechanical properties of flax fiber-reinforced composites. The research finds that treatment with a 5% solution of sodium acetate leads to the best mechanical performance and morphology of the composites.

JOURNAL OF COMPOSITES SCIENCE (2022)

添加到收藏夹

Article Materials Science, Paper & Wood

Comparative study on material properties of wood-ash alkali and commercial alkali treated Sterculia fiber

Krishna Prasad Kandel et al.

Summary: In this research, alkali was extracted from wood ash and used to process lignocellulose fiber obtained from Sterculia villosa. The findings showed that the fiber treated with wood-ash alkali had similar mechanical strength to the fiber treated with sodium hydroxide, indicating that wood-ash alkali treatment could be a low-cost method for processing lignocellulose biomass.

CELLULOSE (2022)

添加到收藏夹

Review Materials Science, Paper & Wood

A review on alternative raw materials for sustainable production: novel plant fibers

Yasemin Seki et al.

Summary: With increasing environmental awareness, renewable raw materials have become important in the textile and composite industry. This review provides detailed information on the chemistry, structure, and properties of novel plant fibers, making it useful for researchers.

CELLULOSE (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Influence of sodium bicarbonate treatment on the free vibration characteristics of Phoenix sp. fiber loaded polyester composites

G. Rajeshkumar et al.

Summary: The study compared the free vibration characteristics of untreated and sodium bicarbonate treated Phoenix sp. fiber reinforced polyester composites, with results showing that the treated composites had higher natural frequency, particularly those treated for 120 hours.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Materials Science, Composites

Fatigue and impact strengths of kenaf fibre reinforced polypropylene composites: effects of fibre treatments

Oscar Asumani et al.

Summary: The study found that alkali-silane treatment significantly improves the fatigue and impact strengths of kenaf fiber reinforced polypropylene composites, with an optimal alkali concentration of 5% to 6%. Microscopy examination revealed that fiber treatments have a significant impact on the damage mechanisms of the composites, with alkali-silane treated composites showing improved fiber-matrix adhesion.

ADVANCED COMPOSITE MATERIALS (2021)

添加到收藏夹

Article Materials Science, Composites

Physical and abrasive wear behaviour of Urena lobata fiber-reinforced polymer composites

Chioma E. Njoku et al.

Summary: The influence of fiber loading and chemical treatment of Urena lobata natural fiber on the physical, wear, and thermal stability of polypropylene-based composites was investigated. The study found that alkali-treated Urena lobata fiber-reinforced polypropylene composites showed improved density and wear resistance, but absorbed more water compared to untreated fiber composites, also exhibiting enhanced thermal stability due to better fiber-matrix adhesion.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2021)

添加到收藏夹

Review Mechanics

Enhancement of impact toughness and damage behaviour of natural fibre reinforced composites and their hybrids through novel improvement techniques: A critical review

M. Muneer Ahmed et al.

Summary: This paper critically examines the essential information affecting the morphological characteristics, fracture toughness, damage tolerance, and impact resistance of natural fiber reinforced and hybrid composites. It also reviews novel improvement techniques suitable for natural fiber composites to enhance damage tolerance and impact resistance behaviors.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Polymer Science

An Innovative Treatment Based on Sodium Citrate for Improving the Mechanical Performances of Flax Fiber Reinforced Composites

Vincenzo Fiore et al.

Summary: The study evaluated the effectiveness of a cost-effective and eco-friendly treatment using sodium citrate on the mechanical properties of flax fiber reinforced composites. Treating flax fibers in solutions with concentration up to 10% resulted in the best mechanical performances and lowest void contents in composites. Higher concentrations of Na3C6H5O7 negatively affected both the morphology and mechanical properties of composites.

POLYMERS (2021)

添加到收藏夹

Article Physics, Condensed Matter

Synthesis, physical and mechanical properties of lead strontium titanate glass ceramics

Shweta et al.

Summary: Various glass compositions were synthesized in a glass system and converted into glass ceramics. Physical parameters were investigated and structural properties were evaluated using X-Ray diffraction and FTIR spectroscopy.

PHYSICA B-CONDENSED MATTER (2021)

添加到收藏夹

Article Materials Science, Composites

Hemp fiber surface modification: Its effect on mechanical and tribological properties of hemp fiber reinforced epoxy composites

Sudhakar Behera et al.

Summary: This research investigated the effects of sodium carbonate and hydrogen peroxide treatment on hemp fiber reinforced epoxy composites (HFREC), focusing on water absorption, mechanical, and tribological properties. The results showed that both chemical treatments improved water resistance and mechanical properties of the composites, while also enhancing wear and frictional properties. The best overall performance was observed in peroxide treated HFREC, as confirmed by SEM images of worn and fractured surfaces.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Materials Science, Textiles

Effect of Chemical Treatment on Thermal, Mechanical and Degradation Behavior of Banana Fiber Reinforced Polymer Composites

Ujendra Kumar Komal et al.

JOURNAL OF NATURAL FIBERS (2020)

添加到收藏夹

Article Polymer Science

Effect of Various Surface Treatments on the Performance of Jute Fibers Filled Natural Rubber (NR) Composites

Kumarjyoti Roy et al.

POLYMERS (2020)

添加到收藏夹

Article Materials Science, Composites

Sodium carbonate treatment of fibres to improve mechanical and water absorption characteristics of short bamboo natural fibres reinforced polyester composite

Muhammad Ramzan Abdul Karim et al.

PLASTICS RUBBER AND COMPOSITES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of surface treatment on the tribological properties of Coccinia Indica cellulosic fiber reinforced polymer composites

Bhuvaneshwaran Mylsamy et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

添加到收藏夹

Article Materials Science, Textiles

Investigations on jute fibre-reinforced polyester composites: Effect of alkali treatment and poly(lactic acid) coating

M. K. Gupta

JOURNAL OF INDUSTRIAL TEXTILES (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens

R. Vijay et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Article Engineering, Mechanical

Influence of silane treatment on the mechanical, tribological and morphological properties of corn stalk fiber reinforced polymer composites

Yucheng Liu et al.

TRIBOLOGY INTERNATIONAL (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

The mechanical, hygral, and interfacial strength of continuous bamboo fiber reinforced epoxy composites

Jyun-Kai Huang et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Paper & Wood

Effect of chemical treatments on properties of raffia palm (Raphia farinifera) fibers

Opeoluwa Fadele et al.

CELLULOSE (2019)

添加到收藏夹

Article Polymer Science

Effect of chemical treatment on the thermal properties of hybrid natural fiber-reinforced composites

J. S. S. Neto et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

添加到收藏夹

Article Polymer Science

Cellulose fiber-reinforced thermosetting composites: impact of cyanoethyl modification on mechanical, thermal and morphological properties

Md Rezaur Rahman et al.

POLYMER BULLETIN (2019)

添加到收藏夹

Article Materials Science, Composites

Sisal fiber-reinforced green composites: Effect of ecofriendly fiber treatment

Saurabh Chaitanya et al.

POLYMER COMPOSITES (2018)

添加到收藏夹

Article Polymer Science

Silica Modified by Alcohol Polyoxyethylene Ether and Silane Coupling Agent Together to Achieve High Performance Rubber Composites Using the Latex Compounding Method

Junchi Zheng et al.

POLYMERS (2018)

添加到收藏夹

Article Materials Science, Textiles

Effect of Chemical Modifications on Surface Morphological, Structural, Mechanical, and Thermal Properties of Sponge-gourd Natural Fiber

Taimur-Al-Mobarak et al.

FIBERS AND POLYMERS (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Characterization and properties of natural fiber polymer composites: A comprehensive review

M. R. Sanjay et al.

JOURNAL OF CLEANER PRODUCTION (2018)

添加到收藏夹

Article Materials Science, Composites

Effect of surface modification of jute fiber on the mechanical properties and durability of jute fiber-reinforced epoxy composites

Anna K. F. Dilfi et al.

POLYMER COMPOSITES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties of functionalised CNT filled kenaf reinforced epoxy composites

Napisah Sapiai et al.

MATERIALS RESEARCH EXPRESS (2018)

添加到收藏夹

Review Materials Science, Composites

Influence of fiber surface treatments on physico-mechanical behaviour of jute/epoxy composites impregnated with aluminium oxide filler

Priyadarshi Tapas Ranjan Swain et al.

JOURNAL OF COMPOSITE MATERIALS (2017)

添加到收藏夹

Article Engineering, Mechanical

Dry sliding wear behavior of untreated and treated sugar palm fiber filled phenolic composites using factorial technique

B. Rashid et al.

WEAR (2017)

添加到收藏夹

Article Materials Science, Textiles

Effect of Alkyl Phenol from Cashew Nutshell Liquid and Sisal Fiber Reinforcement on Dry Sliding Wear Behavior of Epoxy Resin

Rajesh Panda et al.

JOURNAL OF NATURAL FIBERS (2017)

添加到收藏夹

Article Mechanics

Nanocellulose coated woven jute/green epoxy composites: Characterization of mechanical and dynamic mechanical behavior

Abdul Jabbar et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

A new eco-friendly chemical treatment of natural fibres: Effect of sodium bicarbonate on properties of sisal fibre and its epoxy composites

V. Fiore et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Review Engineering, Multidisciplinary

Flax fibre and its composites - A review

Libo Yan et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Polymer Science

Review: Raw Natural Fiber-Based Polymer Composites

Vijay Kumar Thakur et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2014)

添加到收藏夹

Article Chemistry, Applied

Characterization of a novel natural cellulosic fiber from Prosopis juliflora bark

S. S. Saravanakumar et al.

CARBOHYDRATE POLYMERS (2013)

添加到收藏夹

Article Polymer Science

Characteristics of kenaf fibre/epoxy composites subjected to thermal degradation

Z. N. Azwa et al.

POLYMER DEGRADATION AND STABILITY (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dry sliding wear behavior of SiC/Al2O3 filled jute/epoxy composites

K. Sabeel Ahmed et al.

MATERIALS & DESIGN (2012)

添加到收藏夹

Article Materials Science, Composites

The Mechanical Properties of γ-Methacryloxypropyltrimethoxy silane-treated Jute/Polyester Composites

Kutlay Sever et al.

JOURNAL OF COMPOSITE MATERIALS (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of fibre-surface treatment on structural, thermal and mechanical properties of jute fibre and its composite

E. Sinha et al.

BULLETIN OF MATERIALS SCIENCE (2009)

添加到收藏夹

Article Engineering, Manufacturing

Cellulose modified fibres in cement based composites

G. H. D. Tonoli et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)

添加到收藏夹

Article Materials Science, Composites

Physical Modification of Natural Fibers and Thermoplastic Films for Composites - A Review

S. Mukhopadhyay et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2009)

添加到收藏夹

Article Polymer Science

Preparation and crystalline analysis of high-grade bamboo dissolving pulp for cellulose acetate

Jianxin He et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

添加到收藏夹

Article Energy & Fuels

Characteristics of hemicellulose, cellulose and lignin pyrolysis

Haiping Yang et al.

FUEL (2007)

添加到收藏夹

Article Food Science & Technology

Antimicrobial and antioxidant effects of sodium acetate, sodium lactate, and sodium citrate in refrigerated sliced salmon

Khalid Ibrahim Sallam

FOOD CONTROL (2007)

添加到收藏夹

Article Engineering, Manufacturing

A study of the effect of acetylation and propionylation surface treatments on natural fibres

V Tserki et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of alkali treatment on the structure, morphology and thermal properties of native grass fibers as reinforcements for polymer matrix composites

W Liu et al.

JOURNAL OF MATERIALS SCIENCE (2004)

添加到收藏夹

Article Polymer Science

Study of the thermal behavior of alkali-treated jute fibers

D Ray et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2002)

添加到收藏夹

Article Nutrition & Dietetics

Antibacterial activity of citrate and acetate

YL Lee et al.

NUTRITION (2002)

添加到收藏夹

Article Materials Science, Composites

The effect of alkali treatment on the adhesion characteristics of sisal fibres

ETN Bisanda

APPLIED COMPOSITE MATERIALS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.