☆ 4.8 Article

Structural design of microporous layer to mitigate carbon corrosion in proton exchange membrane fuel cells

CARBON (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Experimental study of the influence of dynamic load cycle and operating parameters on the durability of PEMFC

Tiankuo Chu et al.

Summary: The study investigated the impact of different dynamic load cycles on the performance of proton exchange membrane fuel cells, finding that DLC-02 exhibited lower voltage degradation at low current densities, especially in the first 400 hours. The evolution of resistance types and a proposed formula for calculating polarization losses were key findings in distinguishing the sources of voltage loss.

ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Observation of flooding-induced performance enhancement in PEMFCs

Heesoo Choi et al.

Summary: In this study, water removal in a transparent fuel cell and its relationship with voltage and impedance responses are analyzed. It is found that the frequency of water flow is positively correlated with voltage, suggesting that frequent flooding-induced water removal could enhance fuel cell performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Water droplet detachment characteristics on surfaces of gas diffusion layers in PEMFCs

Mengjie Li et al.

Summary: Water management is crucial for the performance and stability of proton exchange membrane fuel cells (PEMFCs). This study investigates the detachment characteristics of water droplets on the gas diffusion layer (GDL) surface under different contact angles and channel heights. The results show that droplet detachment is influenced by the gas Reynolds number and the presence of PTFE on the GDL surface. The study also suggests that reducing the channel height can improve water detachment.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Chemistry, Physical

Direct growth of carbon nanotubes forests on carbon fibers to replace microporous layers in proton exchange membrane fuel cells

Marie Fontana et al.

Summary: A novel microporous layer structure has been developed using thin multiwall carbon nanotubes forests, which showed a 30% performance improvement compared to state of the art gas diffusion media, even in the presence of liquid water.

CARBON (2021)

添加到收藏夹

Review Engineering, Chemical

Comparison of catalyst-coated membranes and catalyst-coated substrate for PEMFC membrane electrode assembly: A review

Bee Huah Lim et al.

Summary: Catalyst-coated membranes (CCMs) have advantages in reducing platinum catalyst loading and improving catalyst-utilization efficiency compared to other methods. Considerations on material-manufacturing effects and overall performance analysis are important in MEA fabrication methods. Further research is needed to enhance fuel cell performance through the use of CCM methods in MEA fabrication.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Exploration of the Polarization Curve for Proton-Exchange Membrane Fuel Cells

Lunyang Liu et al.

Summary: The study reveals that the polarization curve is closely related to the performance of PEMFCs, with factors such as thermodynamic parameters and operational settings playing a role. The research indicates that PPD is positively correlated with ion-exchange capacity, operational temperature, and internal resistance, while negatively correlated with membrane thickness and catalyst loading.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Electrostatically Sprayed Nanostructured Electrodes for Energy Conversion and Storage Devices

Bhavana Joshi et al.

Summary: The electrostatic spray method is a promising nonvacuum technique for efficient deposition of thin films from solutions or dispersions, offering versatility in morphological engineering of nanostructured films. Current advances in electrostatic spraying can produce exceptional morphologies, notably useful in enhancing performance in electrochemical applications. Interesting morphologies of metal oxides and their composites produced by electrostatic spraying highlight enhanced energy conversion and storage performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Energy & Fuels

Effect of Structural Parameters on Mass Transfer Characteristics in the Gas Diffusion Layer of Proton Exchange Membrane Fuel Cells Using the Lattice Boltzmann Method

Jiadong Liao et al.

Summary: The gas diffusion layer (GDL) is vital for effective gas transport in proton exchange membrane fuel cells. Structural parameters like carbon fiber diameter, porosity, and thickness significantly influence the mass transfer characteristics of the GDL. Increasing fiber diameter and porosity can enhance gas velocity and diffusion characteristics, while increasing thickness may reduce gas velocity and weaken diffusion, but with less noticeable effects.

ENERGY & FUELS (2021)

添加到收藏夹

Article Chemistry, Physical

Hydrophilicity control of laser-induced amorphous carbon-encapsulated carbon nano-onions and their application to proton exchange membrane fuel cells under low humidity

Je Hyeon Yeon et al.

Summary: Research focuses on improving the performance of proton exchange membrane fuel cells under low humidity conditions through the preparation of amorphous carbon-encapsulated carbon nano-onions, which have been shown to have a water retention effect. By introducing an AC-CNO layer on both the anode and cathode, a synergistic effect was achieved, significantly enhancing the performance of the PEMFC.

CARBON (2021)

添加到收藏夹

Article Chemistry, Physical

Simultaneously boosting hydrogen production and ethanol upgrading using a highly-efficient hollow needle-like copper cobalt sulfide as a bifunctional electrocatalyst

Shuang Sheng et al.

Summary: The construction of hollow needle-like copper cobalt sulfide on carbon cloth as a bifunctional electrocatalyst shows superior catalytic activity and durability in ethanol oxidation reaction (EOR) and excellent hydrogen evolution reaction (HER) performance. The homemade ethanol-water electrolyser only demands a low voltage to deliver high current density, making it promising for energy-saving H-2 production and oxidation of ethanol into value-added acetic acid. This work may pave the way for the rational design of other electrocatalysts for efficient biomass oxidation reaction and relevant H-2 production applications.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Optimization of GDL to improve water transferability

Tianya Li et al.

Summary: The fuel cell faces issues with reduced power due to excessive water at high current, with the Gas Diffusion Layer (GDL) playing a critical role. A novel GDL with improved water transferability was introduced in the study by modifying the microporous layer and carbon paper composition.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Investigation of real-time changes and recovery of proton exchange membrane fuel cell in voltage reversal

Rui Lin et al.

Summary: This study designed a set of online testing methods to monitor the real-time changes of internal current density and local temperature during the voltage reversal process of a PEMFC. The results showed that carbon corrosion in the outlet region of the reversal anode was the most severe, and the process of performance recovery after reversal made the current density distribution in the fuel cell more uniform.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Electrochemistry

Influence of Catalyst Layer and Gas Diffusion Layer Porosity in Proton Exchange Membrane Fuel Cell Performance

B. Prince Abraham et al.

Summary: The efficiency of fuel cells is influenced by the porosity of gas diffusion layers (GDL) and catalyst layers, optimizing porosity can improve cell performance. The porosity of GDL has a greater impact on the current density of PEMFC.

ELECTROCHIMICA ACTA (2021)

添加到收藏夹

Article Chemistry, Physical

Accelerated stress testing of PUREBLACK® carbon-based gas diffusion layers with pore forming agent for proton exchange membrane fuel cells

G. Athanasaki et al.

Summary: This study evaluated the performance of gas diffusion layer configurations containing different materials in water and hydrogen peroxide, showing that VULCAN (R) carbon suffered severe corrosion leading to performance degradation, while PUREBLACK (R) carbon demonstrated higher durability, possibly due to its structure.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Effect of humidification on distribution and uniformity of reactants and water content in PEMFC

Zongyi Cheng et al.

Summary: The research found that hydrogen humidification has a significant impact on reactant distribution and membrane water content, but it needs to control the relative humidity within a suitable range to maintain uniformity. When the relative humidity of hydrogen is 50%, the distribution of reactants is the most uniform.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Towards the digitalisation of porous energy materials: evolution of digital approaches for microstructural design

Zhiqiang Niu et al.

Summary: The digitization of porous energy materials is considered as a promising solution to address the complex structure-property relationships and optimization challenges, enabling rapid characterization, property prediction, and autonomous optimization. The recent advancements in artificial intelligence (AI) have successfully applied deep learning methods in microstructural reconstruction, property prediction, and performance optimization of porous energy materials. The potential of deep learning methods in achieving autonomous optimization and discovery of new porous energy materials based on advanced computational modeling and AI techniques is highlighted.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Energy & Fuels

Water transport in the gas diffusion layer of proton exchange membrane fuel cell under vibration conditions

Daokuan Jiao et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microporous Layers with Different Decorative Patterns for Polymer Electrolyte Membrane Fuel Cells

Liang Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced Water Management in PEMFCs: Perforated Catalyst Layer and Microporous Layers

Arezou Mohseninia et al.

CHEMSUSCHEM (2020)

添加到收藏夹

Review Chemistry, Physical

Planar polymer electrolyte membrane fuel cells: powering portable devices from hydrogen

Prabal Sapkota et al.

SUSTAINABLE ENERGY & FUELS (2020)

添加到收藏夹

Article Thermodynamics

Energy efficiency improvements by investigating the water flooding management on proton exchange membrane fuel cell (PEMFC)

O. S. Ijaodola et al.

ENERGY (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

In Situ and Operando Characterization of Proton Exchange Membrane Fuel Cells

Quentin Meyer et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Review Chemistry, Physical

Carbon-based hydrogels: synthesis and their recent energy applications

Jayakumar Anjali et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Review Chemistry, Physical

Nanocellulose-based materials as components of polymer electrolyte fuel cells

Carla Vilela et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

Through-plane wettability tuning of fibrous carbon layers via O2 plasma treatment for enhanced water management

Beniamin Zahiri et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Unlocking the door to highly active ORR catalysts for PEMFC applications: polyhedron-engineered Pt-based nanocrystals

Yan-Jie Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

The effect of through plane pore gradient GDL on the water distribution of PEMFC

Donggun Ko et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storage

Turgut M. Gur

ENERGY & ENVIRONMENTAL SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

The Role of Compressive Stress on Gas Diffusion Media Morphology and Fuel Cell Performance

Robert W. Atkinson et al.

ACS APPLIED ENERGY MATERIALS (2018)

添加到收藏夹

Article Energy & Fuels

Improved Performance of Polymer Electrolyte Membrane Fuel Cells with Modified Microporous Layer Structures

Saad S. Alrwashdeh et al.

ENERGY TECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Operando Quantification of Three-Dimensional Water Distribution in Nanoporous Carbon-Based Layers in Polymer Electrolyte Membrane Fuel Cells

Saad S. Alrwashdeh et al.

ACS NANO (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Molecular engineered nanomaterials for catalytic hydrogen evolution and oxidation

Nathan Coutard et al.

CHEMICAL COMMUNICATIONS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

High Performance Gas Diffusion Layer with Hydrophobic Nano layer under a Supersaturated Operation Condition for Fuel Cells

Tae-Jun Ko et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Energy & Fuels

Designed experiments to characterize PEMFC material properties and performance

Sarah Flick et al.

APPLIED ENERGY (2014)

添加到收藏夹

Article Chemistry, Physical

Investigation of the effect of microporous layers on water management in a proton exchange membrane fuel cell using novel diagnostic methods

Mauricio Blanco et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Study on hydrophobicity loss of the gas diffusion layer in PEMFCs by electrochemical oxidation

Shuchun Yu et al.

RSC ADVANCES (2014)

添加到收藏夹

Article Electrochemistry

Investigation of the corrosion of carbon supports in polymer electrolyte fuel cells using simulated start-up/shutdown cycling

Young-Chul Park et al.

ELECTROCHIMICA ACTA (2013)

添加到收藏夹

Article Chemistry, Physical

Effect of gas diffusion layer and membrane properties in an annular proton exchange membrane fuel cell

I. Khazaee et al.

APPLIED SURFACE SCIENCE (2012)

添加到收藏夹

Article Chemistry, Physical

Investigation of water accumulation and discharge behaviors with variation of current density in PEMFC by high-resolution soft X-ray radiography

Phengxay Deevanhxay et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

添加到收藏夹

Article Chemistry, Physical

Determination of the pore size distribution of micro porous layer in PEMFC using pore forming agents under various drying conditions

Jeong Hwan Chun et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

添加到收藏夹

Review Chemistry, Multidisciplinary

Nanostructured electrode materials for electrochemical energy storage and conversion

A. Manthiram et al.

ENERGY & ENVIRONMENTAL SCIENCE (2008)

添加到收藏夹

Article Energy & Fuels

Effects of Fabricated Gas Diffusion Layers with Different Reinforce Materials in Proton Exchange Membrane Fuel Cell (PEMFC)

Tse-Hao Ko et al.

ENERGY & FUELS (2008)

添加到收藏夹

Article Chemistry, Physical

Facilitating mass transport in gas diffusion layer of PEMFC by fabricating micro-porous layer with dry layer preparation

Jian Chen et al.

JOURNAL OF POWER SOURCES (2008)

添加到收藏夹

Article Chemistry, Physical

The influence of membrane electrode assembly water content on the performance of a polymer electrolyte membrane fuel cell as investigated by H-1 NMR microscopy

Kirk W. Feindel et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.