相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Investigation of the Deformation Behaviour and Resulting Ply Thicknesses of Multilayered Fibre-Metal Laminates
Missam Irani et al.
JOURNAL OF COMPOSITES SCIENCE (2021)
The Perforation Resistance of Aluminum-Based Thermoplastic FMLs
Nassier. A. Nassir et al.
APPLIED COMPOSITE MATERIALS (2021)
Investigation of natural fibre metal laminate as car front hood
Noordiana Mohd Ishak et al.
MATERIALS RESEARCH EXPRESS (2021)
An experimental and numerical investigation on low velocity impact response of GLAREs
Soroush Azhdari et al.
COMPOSITE STRUCTURES (2021)
Testing Procedure for Fatigue Characterization of Steel-CFRP Hybrid Laminate Considering Material Dependent Self-Heating
Selim Mrzljak et al.
MATERIALS (2021)
Numerical studies of the low velocity impact behaviour on hybrid fiber metal laminates
Sadananda Megeri et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Post-fatigue life prediction of glare subjected to low-velocity impact
A. Sedaghat et al.
SCIENTIA IRANICA (2021)
Robust numerical approaches for simulating the buckling response of 3D fiber-metal laminates under axial impact - Validation with experimental results
Davide De Cicco et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2020)
Analysis of fatigue crack growth under mixed mode (I plus II) loading conditions in rail steel using CTS specimen
Grzegorz Lesiuk et al.
ENGINEERING FAILURE ANALYSIS (2020)
Experimental Testing and Analytical Modeling of Asymmetric End-Notched Flexure Tests on Glass-Fiber Metal Laminates
Konrad Dadej et al.
METALS (2020)
Tensile mechanical behavior and failure mechanisms of multihole fiber metal laminates-Experimental characterization and numerical prediction
Wentao He et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2020)
Experimental and numerical investigation into the impact resistance of aluminium carbon laminates
Patryk Jakubczak et al.
COMPOSITE STRUCTURES (2020)
Fatigue crack growth of new FML composites for light ship buildings under predominant mode II loading condition
Antonio Giallanza et al.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2020)
Effect on vibration characteristics of fiber metal laminates sandwiched with natural fibers
Naresh Kali et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Enhancement of performance of three-dimensional fiber metal laminates under low velocity impact - A coupled numerical and experimental investigation
Zohreh Asaee et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2019)
Hygrothermal effect on the strain energy release rates and mode mixity of asymmetric delaminations in generally layered beams
Panayiotis Tsokanas et al.
ENGINEERING FRACTURE MECHANICS (2019)
Investigation of the mechanical behavior of CARALL FML at high strain rate
M. Sasso et al.
COMPOSITE STRUCTURES (2019)
A modified cohesive zone model for fatigue delamination in adhesive joints: Numerical and experimental investigations
Ahmad S. M. Al-Azzawi et al.
COMPOSITE STRUCTURES (2019)
Influence of impactor shape on low-velocity impact behavior of fiber metal laminates combined numerical and experimental approaches
Lu Yao et al.
THIN-WALLED STRUCTURES (2019)
Finite element method analysis of fibre-metal laminates considering different approaches to material model
Michal Smolnicki et al.
SN APPLIED SCIENCES (2019)
Response and failure of fiber metal laminates subjected to high strain rate tensile loading
Ankush P. Sharma et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
A new constitutive bulk material model to predict the uniaxial tensile nonlinear behavior of fiber metal laminates
Gholam Hossein Majzoobi et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2018)
An investigation into the flexural and drawing behaviors of GFRP-based fiber-metal laminate
Ali Rajabi et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2018)
Analysis of the bending and failure of fiber metal laminates based on glass and carbon fibers
Monika Ostapiuk et al.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2018)
Finite Element Simulation of Interlaminar and Intralaminar Damage in Laminated Composite Plates Subjected to Impact
M. Soroush et al.
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2018)
Finite Element Simulation of Interlaminar and Intralaminar Damage in Laminated Composite Plates Subjected to Impact
M. Soroush et al.
LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES (2018)
Mode-I Metal-Composite Interface Fracture Testing for Fibre Metal Laminates
Periyasamy Manikandan et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
Tensile and impact properties of cost-effective hybrid fiber metal laminate sandwich structures
Sivakumar Dhar Malingam et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
THE EFFECT OF FIBER ORIENTATION AND STRESS RATIO ON THE CRACK GROWTH BEHAVIOR OF FIBER METAL LAMINATES (FMLs)
Anindito Purnowidodo et al.
INTERNATIONAL JOURNAL OF TECHNOLOGY (2018)
An experimental review on the mechanical properties and hygrothermal behaviour of fibre metal laminates
M. Chandrasekar et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)
Interlaminar fracture toughness of glass and carbon reinforced multidirectional fiber metal laminates
Jaroslaw Bienias et al.
ENGINEERING FRACTURE MECHANICS (2017)
Investigation of fatigue crack growth rate in CARALL, ARALL and GLARE
W. Asghar et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
Experimental and numerical investigation on the uni-axial tensile response and failure of fiber metal laminates
Ankush P. Sharma et al.
COMPOSITES PART B-ENGINEERING (2017)
Mechanical characterization of fiber metal laminate based on aramid fiber reinforced polypropylene
N. G. Gonzalez-Canche et al.
COMPOSITE STRUCTURES (2017)
Failure assessment of thin-walled FML profiles during buckling and postbuckling response
D. Banat et al.
COMPOSITES PART B-ENGINEERING (2017)
Analysis of notched woven composites and fiber metal laminates with previous fatigue damage
C. Rubio-Gonzalez et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Open-hole tensile progressive damage and failure prediction of carbon fiber-reinforced PEEK-titanium laminates
Dandan Du et al.
COMPOSITES PART B-ENGINEERING (2016)
Characterizing cohesive zone model using a mixed-mode direct method
H. Khoramishad et al.
ENGINEERING FRACTURE MECHANICS (2016)
Finite Element Modeling of Fatigue in Fiber-Metal Laminates
Pawel B. Woelke et al.
AIAA JOURNAL (2015)
Low velocity impact of carbon fiber aluminum laminates
Guo-Cai Yu et al.
COMPOSITE STRUCTURES (2015)
Experimental and numerical study on the improvement of interlaminar mechanical properties of Al/CFRP laminates
Huiming Ning et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Cohesive Zone Parameters Selection for Mode-I Prediction of Interfacial Delamination
Mohsen Moslemi et al.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2015)
Low-cycle fatigue delamination initiation and propagation in fibre metal laminates
F. Mazaheri et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)
Experimental and Numerical Investigation of Metal Type and Thickness Effects on the Impact Resistance of Fiber Metal Laminates
M. Sadighi et al.
APPLIED COMPOSITE MATERIALS (2012)
A study on the influence of cohesive zone interface element strength parameters on mixed mode behaviour
Paul W. Harper et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Delamination modelling of GLARE using the extended finite element method
J. L. Curiel Sosa et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2012)
Studying the Tensile Behaviour of GLARE Laminates: A Finite Element Modelling Approach
P. Soltani et al.
APPLIED COMPOSITE MATERIALS (2011)
A review: Fibre metal laminates, background, bonding types and applied test methods
Tamer Sinmazcelik et al.
MATERIALS & DESIGN (2011)
Structural behaviour of fibre metal laminates subjected to a low velocity impact
Fan JiYing et al.
SCIENCE CHINA-PHYSICS MECHANICS & ASTRONOMY (2011)
Numerical Simulation of Glass-Fiber-Reinforced Aluminum Laminates with Diverse Impact Damage
Hyoungseock Seo et al.
AIAA JOURNAL (2010)
Fracture simulation of CFRP laminates in mixed mode bending
P. Naghipour et al.
ENGINEERING FRACTURE MECHANICS (2009)
Modeling of fatigue crack growth in notched fiber metal laminates
Po-Yu Chang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2008)
Cohesive zone Modeling of mode I fracture in adhesive bonded joints
M. Alfano et al.
ADVANCES IN FRACTURE AND DAMAGE MECHANICS VI (2007)
Finite element approach for modelling fatigue damage in fibre-reinforced composite materials
W Van Paepegem et al.
COMPOSITES PART B-ENGINEERING (2001)