相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Numerical prediction on deposition growth and heat transfer characteristics burning high-sodium pulverized coal
Hongchao Miao et al.
FUEL (2022)
Dynamic CFD modeling evaluation of ash deposition behavior and morphology evolution with different tube arrangements
Lin Mu et al.
POWDER TECHNOLOGY (2021)
Parametric investigation and correlation development for thermal-hydraulic characteristics of honeycomb 4H-type finned tube heat exchangers
Songzhen Tang et al.
APPLIED THERMAL ENGINEERING (2021)
Effect of transverse triangular cross-sectional wedges on the asymptotic fouling deposition behavior of the flow through an inline tube bundle
Pasada Yisunzam et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Numerical simulation of ash deposition behavior with a novel erosion model using dynamic mesh
Hao Zhou et al.
FUEL (2021)
Heat transfer and pressure drop characteristics of 3-D finned tube heat exchanger in ash-laden flue gas
Min Cheng et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
On-site experimental study on fouling and heat transfer characteristics of flue gas heat exchanger for waste heat recovery
Song-Zhen Tang et al.
FUEL (2021)
Effect of transverse triangular wedges on the behavior of the ash deposition and heat transfer of an inline tube bundle
Anusorn Chinsuwan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Dynamic simulation on ash deposition and heat transfer behavior on a staggered tube bundle under high-temperature conditions
Zhimin Zheng et al.
ENERGY (2020)
Experimental research on the ash deposition characteristics of 3-D finned tube bundle
Min Cheng et al.
APPLIED THERMAL ENGINEERING (2019)
Fouling and thermal-hydraulic characteristics of aligned elliptical tube and honeycomb circular tube in flue gas heat exchangers
Song-Zhen Tang et al.
FUEL (2019)
Recent advancements in impedance of fouling resistance and particulate depositions in heat exchangers
Muhammad Awais et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Heat transfer and fouling performance of finned tube heat exchangers: Experimentation via on line monitoring
Fei-Long Wang et al.
FUEL (2019)
Parametric study on fouling mechanism and heat transfer characteristics of tube bundle heat exchangers for reducing fouling considering the deposition and removal mechanisms
Song-Zhen Tang et al.
FUEL (2018)
Ash formation and deposition in coal and biomass fired combustion systems: Progress and challenges in the field of ash particle sticking and rebound behavior
Ulrich Kleinhans et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2018)
Modeling of ash formation and deposition processes in coal and biomass fired boilers: A comprehensive review
Cai Yongtie et al.
APPLIED ENERGY (2018)
The contribution of differently-sized ash particles to the fouling trends of a pilot-scale coal-fired combustor with an ash deposition CFD model
Manuel Garcia Perez et al.
FUEL (2017)
Fouling characteristics analysis and morphology prediction of heat exchangers with a particulate fouling model considering deposition and removal mechanisms
Song-Zhen Tang et al.
FUEL (2017)
Real-time fouling characteristics of a typical heat exchanger used in the waste heat recovery systems
Fei-Long Wang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Parameter study on the fouling characteristics of the H-type finned tube heat exchangers
Fei-Long Wang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Gas-side fouling, erosion and corrosion of heat exchangers for middle/low temperature waste heat utilization: A review on simulation and experiment
Ming-Jia Li et al.
APPLIED THERMAL ENGINEERING (2017)
Numerical simulation and experiment of gas-solid two phase flow and ash deposition on a novel heat transfer surface
Jinbo Li et al.
APPLIED THERMAL ENGINEERING (2017)
Research on a new type waste heat recovery gravity heat pipe exchanger
En Tian et al.
APPLIED ENERGY (2017)
Fouling growth modeling of kraft recovery boiler fume ash deposits with dynamic meshes and a mechanistic sticking approach
Manuel Garcia Perez et al.
FUEL (2016)
2D dynamic mesh model for deposit shape prediction in boiler banks of recovery boilers with different tube spacing arrangements
Manuel Garcia Perez et al.
FUEL (2015)
A parameter study of tube bundle heat exchangers for fouling rate reduction
Hui Han et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Fly ash deposition modelling: Requirements for accurate predictions of particle impaction on tubes using RANS-based computational fluid dynamics
Roman Weber et al.
FUEL (2013)
A practical numerical approach for prediction of particulate fouling in PC boilers
Krzysztof Waclawiak et al.
FUEL (2012)
Numerical evaluation of a heat exchanger with inline tubes of different size for reduced fouling rates
Sofia G. Mavridou et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Conventional versus specific types of heat exchangers in the case of polluted flue gas as the process fluid - A review
Petr Stehlik
APPLIED THERMAL ENGINEERING (2011)
Influence of the Apex Angle of Cone-Shaped Tubes on Particulate Fouling of Heat Exchangers
Mohamed S. Abd-Elhady et al.
HEAT TRANSFER ENGINEERING (2011)
Design of a novel, intensified heat exchanger for reduced fouling rates
D Bouris et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)
Numerical evaluation of alternate tube configurations for particle deposition rate reduction in heat exchanger tube bundles
D Bouris et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2001)
分享论文
