Film thickness, interfacial waviness and heat transfer during downflow condensation of R134a

Coupled measurements of liquid film thickness and heat transfer during condensation inside minichannels are rare in the literature due to the technical difficulties in performing accurate and non-intrusive measures. The availability of such experimental data is fundamental for better understanding the occurring physical mechanisms and for the proper design of heat exchangers. To cover this gap, in the present work liquid film thickness and heat transfer coefficients have been simultaneously measured during vertical downflow condensation inside a 3.38 mm inner diameter channel. Condensation tests have been run with refrigerant R134a at mass flux between 30 and 150 kg m- 2 s- 1 and 30 degrees C saturation temperature. The instantaneous liquid film thickness and interfacial waves are detected by combining two complementary optical methods: shadowgraph technique (applied to a sequence of flow pattern images recorded by a high speed camera) and chromatic confocal imaging. In the data analysis, the experimental results of R134a have been discussed in comparison to R245fa condensation data taken during a previous experimental campaign at much lower pressure. On average, R134a displays higher liquid film thickness than R245fa and the appearance of high-amplitude disturbance waves, which promote the thinning of the liquid film and enhance the heat transfer, is detected at higher mass flux for R134a as compared to R245fa. The liquid film thickness is found to decrease with the increasing mass flux for both fluids, except from 30 to 50 kg m- 2 s- 1 due to the transition between shear stress-driven and gravity-driven downflow condensation. The accuracy of several well-known models for the prediction of heat transfer coefficient, film thickness and void fraction has been assessed with comparison to the experimental data of both R134a and R245fa.

Automated summary

This study conducted simultaneous measurements of liquid film thickness and heat transfer coefficients during condensation inside a minichannel, finding higher liquid film thickness and enhanced heat transfer efficiency for R134a compared to R245fa. Experimental results of both refrigerants showed different characteristics when compared to previous data, indicating the influence of mass flux and saturation temperature on the condensation process.