☆ 4.6 Article

An overview on the use of operations research in additive manufacturing

ANNALS OF OPERATIONS RESEARCH (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Computer Science, Artificial Intelligence

Machine learning integrated design for additive manufacturing

Jingchao Jiang et al.

Summary: This paper proposes a design for additive manufacturing (AM) framework integrated with machine learning (ML) to learn the complex relationships between design and performance spaces. It demonstrates the effectiveness of using ML in designing a customized ankle brace with tunable mechanical performance.

JOURNAL OF INTELLIGENT MANUFACTURING (2022)

添加到收藏夹

Article Management

A multi-objective optimization approach for exploring the cost and makespan trade-off in additive manufacturing

F. Tevhide Altekin et al.

Summary: This paper addresses the production planning problem in multi-machine additive manufacturing (AM) systems by proposing a unified model that minimizes cost and makespan objectives while considering part and job assignments. Experimental results demonstrate that when identical machines are used, the trade-off between objectives is relatively small; however, when non-identical machines are used, considering both objectives simultaneously becomes important.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2022)

添加到收藏夹

Article Automation & Control Systems

Nesting algorithm for optimization part placement in additive manufacturing

Maurizio Calabrese et al.

Summary: This paper develops a predictive model to evaluate the potential performance of various printing technologies for a given job, aiming to assist technicians in choosing the best solution. The model can qualitatively and quantitatively assess the performance of each technology, considering aspects such as costs, time, and technological parameters.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Automation & Control Systems

Part-grouping and build-scheduling with sequence-dependent setup time to minimize the makespan for non-identical parallel additive manufacturing machines

Yong Jae Kim et al.

Summary: This paper addresses a part-grouping and build-scheduling problem for an additive manufacturing process with non-identical parallel additive manufacturing machines. Mixed integer linear programming model and three meta-heuristic algorithms are presented to find optimal and near-optimal solutions for the problem. Performance comparison is conducted for both small and large problem instances.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Industrial

Supply Chain Coordination via Additive Manufacturing

Mohammad E. Arbabian

Summary: This study examines the impact of 3D printing on supply chains, including factors such as adoption by manufacturers and retailers, economic conditions, and government subsidies. It is found that retailer adoption of 3D printing can eliminate the double marginalization effect, serving as a new mechanism for coordinating the supply chain.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2022)

添加到收藏夹

Article Engineering, Industrial

A genetic algorithm for order acceptance and scheduling in additive manufacturing

Maaz Saleem Kapadia et al.

Summary: This study focuses on the order acceptance and scheduling problem in an additive manufacturing facility, using genetic algorithms to optimize the process and achieve significant profit improvements. The proposed approach outperforms statistically estimated bounds and provides high-quality solutions that meet all technological constraints.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2022)

添加到收藏夹

Article Engineering, Industrial

An enhanced branch-and-price algorithm for the integrated production and transportation scheduling problem

Peiyang He et al.

Summary: Industry 4.0 technologies are transforming manufacturing operations by integrating 3D printing and just-in-time delivery systems to optimize production and transportation scheduling, leading to an average cost savings of about 16.27%.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

3D Printing in the Context of Cloud Manufacturing

Jin Cui et al.

Summary: This paper presents a comprehensive study of 3D printing in cloud manufacturing environment, discussing different 3D printing models and proposing a system architecture design to support the advanced model. A series of key enabling technologies are also introduced. Finally, a prototype of a 3D printing cloud platform is demonstrated through a case study of an aircraft engine part.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2022)

添加到收藏夹

Article Operations Research & Management Science

Additive manufacturing scheduling problem considering assembly operations of parts

Oguzhan Ahmet Arik

Summary: Additive manufacturing (AM) is a promising general-purpose technology mainly used for producing small batch customized products. While most research focuses on reducing costs and increasing speed and availability of AM machines, there is limited investigation into scheduling problems related to AM machines.

OPERATIONAL RESEARCH (2022)

添加到收藏夹

Article Operations Research & Management Science

Cyclic robot scheduling for 3D printer-based flexible assembly systems

Hyun-Jung Kim et al.

Summary: The paper proposes an efficient robot task sequence for a flexible assembly system to minimize cycle time and produce multiple types of products simultaneously.

ANNALS OF OPERATIONS RESEARCH (2021)

添加到收藏夹

Article Engineering, Industrial

Workload control in additive manufacturing shops where post-processing is a constraint: an assessment by simulation

Matthias Thurer et al.

Summary: The research indicates that in additive manufacturing shops, using sequencing rules based on job waiting for release can effectively balance workload and improve overall performance. Additionally, load limiting should be applied at upstream stations while sequencing should be applied at downstream stations.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2021)

添加到收藏夹

Article Engineering, Industrial

Parallel machine scheduling with multiple processing alternatives and sequence-dependent setup times

Jun Kim et al.

Summary: This paper explores a parallel machine scheduling problem where jobs can be processed in multiple parts or in complete form, with various job splitting alternatives. By proposing a mixed integer programming model and a hybrid genetic algorithm, the study shows significant improvement in processing jobs with multiple alternatives compared to a CPLEX solution or a lower bound.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Multicriteria decision analysis framework for part orientation analysis in additive manufacturing

Kasin Ransikarbum et al.

Summary: The research investigates a multi-criteria decision-making framework for part orientation in additive manufacturing, incorporating data envelopment analysis (DEA) and analytic hierarchy process (AHP) techniques. The proposed algorithm is demonstrated using Fused Deposition Modelling and Selective Laser Sintering as case studies to enhance process planning for additive manufacturing.

JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Neural network-based build time estimation for additive manufacturing: a performance comparison

Yosep Oh et al.

Summary: "Additive manufacturing (AM) has introduced significant changes to traditional manufacturing with the possibility of accurate build time estimation using neural networks (NNs), particularly convolutional NNs (CNNs). This study aims to fill the gap in performance comparison for build time estimation among different NN types. Computational experiments show that CNN-based estimation is often more accurate and strongly influenced by design factors, such as changing the size of 3D models."

JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING (2021)

添加到收藏夹

Article Engineering, Manufacturing

Printing Spare Parts at Remote Locations: Fulfilling the Promise of Additive Manufacturing

Bram Westerweel et al.

Summary: This study explores the benefits of on-site printing of spare parts in remote geographic locations with intermittent spare parts supply and fixed interval replenishment. By considering emergency supply options and modeling replenishment decisions, it is found that on-site 3D printing leads to significant operational cost savings and increased asset availability compared to expediting. These results have implications for organizations operating in remote locations, such as the mining and offshore industry.

PRODUCTION AND OPERATIONS MANAGEMENT (2021)

添加到收藏夹

Article Engineering, Manufacturing

Retailing with 3D Printing

Li Chen et al.

Summary: This study examines the adoption of 3D printing in retail, uncovering both the substitution and structural effects of this technology. It analyzes the impact on product offering, pricing, and inventory decisions in online and in-store sales channels.

PRODUCTION AND OPERATIONS MANAGEMENT (2021)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Fuzzy collaborative intelligence fuzzy analytic hierarchy process approach for selecting suitable three-dimensional printers

Toly Chen et al.

Summary: The study proposed a fuzzy collaborative intelligence fuzzy analytic hierarchy process (FAHP) approach for assessing the performance of a 3D printer, ensuring consensus among decision makers. Experiment results showed the superior accuracy of the proposed methodology compared to existing methods.

SOFT COMPUTING (2021)

添加到收藏夹

Article Engineering, Manufacturing

Part decomposition and evaluation based on standard design guidelines for additive manufacturability and assemblability

Yosep Oh et al.

Summary: Additive Manufacturing (AM) offers the ability to create complex part geometries, but faces limitations like support structures, stair-step effect, and long build time. Part Decomposition (PD) techniques have been deployed to overcome these limitations, proposing design considerations for optimization. By employing genetic algorithms for recursively evaluating outcomes, significant reductions in build time and material consumption have been achieved for material extrusion and vat photopolymerization processes.Comparing to Near-convex Decomposition (NCD) method, the optimization approach showed better performance in reducing material consumption.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Industrial

Towards sustainable industry 4.0: A green real-time IIoT multitask scheduling architecture for distributed 3D printing services

Lamis R. Darwish et al.

Summary: The combination of Industrial Internet of Things (IIoT) and 3D printing technologies opens up new opportunities for customized manufacturing in the era of Industry 4.0. However, the challenge lies in optimizing the allocation and scheduling of personalized 3D printing tasks while respecting customized attributes and balancing workload in real-time requirements.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A reinforcement learning iterated local search for makespan minimization in additive manufacturing machine scheduling problems

Mirko Alicastro et al.

Summary: The paper proposes a Reinforcement Learning Iterated Local Search heuristic method for scheduling multiple additive manufacturing machines, which outperforms other solution approaches significantly in computational experiments.

COMPUTERS & OPERATIONS RESEARCH (2021)

添加到收藏夹

Article Automation & Control Systems

Design Approach for Additive Manufacturing in Spare Part Supply Chains

Filipe Marinho de Brito et al.

Summary: This article introduces a new method for designing additive manufacturing supply chains using optimization methods to address the challenges brought by new technologies. The approach, which includes p-median and mixed-integer linear programming models, is suitable for making decisions on deploying productive resources in specific locations.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A heuristic approach for a scheduling problem in additive manufacturing under technological constraints

Aymen Aloui et al.

Summary: This research focuses on the scheduling and nesting problem in additive manufacturing, aiming to minimize total delay of parts and maximize the use rate of machines. Two models for estimating production time are proposed using mixed linear programming. A heuristic approach is developed to solve large instances, providing better solutions within a reasonable time. The heuristic performances are evaluated on large instances by comparing with lower bounds obtained by relaxing the model, showing solutions found are near to the proposed lower bounds.

COMPUTERS & INDUSTRIAL ENGINEERING (2021)

添加到收藏夹

Review Automation & Control Systems

Status, issues, and future of computer-aided part orientation for additive manufacturing

Yuchu Qin et al.

Summary: This paper reviews the computer-aided part orientation methods for additive manufacturing, categorizes them into two groups, discusses their characteristics, problems, and future research directions.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Industrial

Hybrid simulation models for spare parts supply chain considering 3D printing capabilities

Xinglu Xu et al.

Summary: This research investigates the impact of adopting 3D printing technologies to manufacture spare parts for maintenance operations on operational efficiency and effectiveness in the era of Industry 4.0. Specifically focusing on the United States Navy's fighter jet maintenance operations, various network configurations and system performance under disruptions were evaluated to obtain managerial insights.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Integrated Fuzzy Analytic Hierarchy Process and Technique for Order of Preference by Similarity to Ideal Solution for Additive Manufacturing Printer Selection

Kasin Ransikarbum et al.

Summary: The selection of AM printers for healthcare applications depends on the type of healthcare applications and criteria preferences from decision-makers.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Machine scheduling with orientation selection and two-dimensional packing for additive manufacturing

Yuxin Che et al.

Summary: Additive manufacturing (AM) has gained increasing attention in recent years, leading to a new batch processing machine scheduling problem. This study presents a mixed integer linear programming model, a simulated annealing algorithm, and other methods to address the issue, demonstrating the advantages of considering multiple part orientations in machine scheduling.

COMPUTERS & OPERATIONS RESEARCH (2021)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Competing through the last mile: Strategic 3D printing in a city logistics context

Emrah Demir et al.

Summary: This study investigates the impact of 3D printing on city logistics and the potential of integrating city logistics with 3D printing manufacturing hubs. It proposes an efficient mathematical model and shows that intelligent selection of production and delivery policies can benefit both customers and suppliers simultaneously.

COMPUTERS & OPERATIONS RESEARCH (2021)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Game theory based multi-task scheduling of decentralized 3D printing services in cloud manufacturing

Sicheng Liu et al.

Summary: The proposed non-cooperative game model and two-layer nested method based on genetic algorithm improve the multi-task scheduling efficiency of distributed 3D printing services in cloud manufacturing, achieving the goal of enhancing service quality and reducing costs. The experimental results demonstrate that this method outperforms traditional scheduling methods.

NEUROCOMPUTING (2021)

添加到收藏夹

Article Engineering, Chemical

System Dynamics Modeling in Additive Manufacturing Supply Chain Management

Jairo Nunez Rodriguez et al.

Summary: A system dynamics model was developed to visualize the behavior of a supply chain adopting additive manufacturing technology. The model, validated through extreme conditions and sensitivity analysis, analyzed the dynamic behavior of variables affecting chain management, showing reductions in production times, inventories, and raw materials due to additive manufacturing practices. This model serves as a starting point for alternative supply chain scenarios through structural and process management policies.

PROCESSES (2021)

添加到收藏夹

Article Operations Research & Management Science

Benefiting from additive manufacturing for mass customization across the product life cycle

Rachel Lacroix et al.

Summary: Additive Manufacturing (AM) was initially developed for prototyping and personalized product manufacturing, but is now also used for final part production to achieve cost-effective mass customization. Despite its increased competitiveness, AM is not likely to replace traditional manufacturing systems, but can complement them to improve efficiency.

OPERATIONS RESEARCH PERSPECTIVES (2021)

添加到收藏夹

Article Operations Research & Management Science

Estimation of processing time using machine learning and real factory data for optimization of parallel machine scheduling problem

Hirochika Yamashiro et al.

Summary: This study focuses on estimating processing times using machine-learning models in manufacturing industries, where the actual processing time distribution is often complex and unknown. A system is proposed to apply machine-learning models for estimating processing times and optimizing scheduling in real-world factory settings. Results show that our method significantly reduces the makespan in parallel machine scheduling by approximately 30% compared to traditional approaches, demonstrating the effectiveness of using machine learning in this context.

OPERATIONS RESEARCH PERSPECTIVES (2021)

添加到收藏夹

Review Engineering, Manufacturing

Perspectives of using machine learning in laser powder bed fusion for metal additive manufacturing

S. L. Sing et al.

Summary: The adoption of laser powder bed fusion (L-PBF) for metals by the industry has been limited due to inconsistency in parts. Machine learning (ML) has the potential to overcome this obstacle by utilizing datasets obtained at various stages of the process chain, leading to better quality control.

VIRTUAL AND PHYSICAL PROTOTYPING (2021)

添加到收藏夹

Proceedings Paper Computer Science, Artificial Intelligence

The impact of Additive Manufacturing on Supply Chain design: a simulation study

Marta Rinaldi et al.

Summary: Additive Manufacturing, a production technology different from traditional subtractive approaches, can bring significant changes to supply chains and impact relationships between supply chain players. Research shows that Additive Manufacturing offers significant benefits and improvements in supply chain performance, particularly in decentralized solutions.

PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON INDUSTRY 4.0 AND SMART MANUFACTURING (ISM 2020) (2021)

添加到收藏夹

Article Engineering, Manufacturing

Simulation of utilization for LPBF manufacturing systems

Tobias Stittgen et al.

Summary: As major technological challenges are being resolved, Additive Manufacturing (AM) is on the verge of industrialization. To operate capital-intensive AM equipment economically, service providers need to configure their production environment in a way that enables high capacity utilization, short throughput times, and minimizes work in process, all while considering the technology's characteristics.

PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2021)

添加到收藏夹

Article Engineering, Industrial

Improved evolutionary algorithm for parallel batch processing machine scheduling in additive manufacturing

Jianming Zhang et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2020)

添加到收藏夹

Article Engineering, Industrial

How will the diffusion of additive manufacturing impact the raw material supply chain process?

Maximilian Kunovjanek et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2020)

添加到收藏夹

Article Management

Stock or Print? Impact of 3-D Printing on Spare Parts Logistics

Jing-Sheng Song et al.

MANAGEMENT SCIENCE (2020)

添加到收藏夹

Article Engineering, Mechanical

Network-based pricing for 3D printing services in two-sided manufacturing-as-a-service marketplace

Deepak Pahwa et al.

RAPID PROTOTYPING JOURNAL (2020)

添加到收藏夹

Article Engineering, Industrial

The impact of build orientation policies on the completion time in two-dimensional irregular packing for additive manufacturing

Yosep Oh et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2020)

添加到收藏夹

Article Engineering, Industrial

An experimental analysis of deepest bottom-left-fill packing methods for additive manufacturing

Luiz J. P. Araujo et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2020)

添加到收藏夹

Article Management

The impact of 3D printing on manufacturer-retailer supply chains

Mohammad E. Arbabian et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2020)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Towards an automated decision support system for the identification of additive manufacturing part candidates

Sheng Yang et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Environmental

Closed loop supply chain network for local and distributed plastic recycling for 3D printing: a MILP-based optimization approach

Pavlo Santander et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A dynamic and static data based matching method for cloud 3D printing

Xiao Luo et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Examining additive manufacturing in supply chain context through an optimization model

Omer Faruk Yilmaz

COMPUTERS & INDUSTRIAL ENGINEERING (2020)

添加到收藏夹

Article Automation & Control Systems

A reliable build orientation optimization method in additive manufacturing: the application to FDM technology

Luca Di Angelo et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Integration of hybrid additive/subtractive manufacturing planning and scheduling by metaheuristics

Andrea Rossi et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Decision-Support Model for Additive Manufacturing Scheduling Using an Integrative Analytic Hierarchy Process and Multi-Objective Optimization

Kasin Ransikarbum et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Harmony Search Optimization of Nozzle Movement for Additive Manufacturing of Concrete Structures and Concrete Elements

Yusuf Cengiz Toklu et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Review Engineering, Manufacturing

Nesting and scheduling problems for additive manufacturing: A taxonomy and review

Yosep Oh et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Proceedings Paper Automation & Control Systems

Dynamic Production Order Allocation for Distributed Additive Manufacturing

Icaro Romolo Sousa Agostino et al.

IFAC PAPERSONLINE (2020)

添加到收藏夹

Review Engineering, Manufacturing

Search for the Optimal Build Direction in Additive Manufacturing Technologies: A Review

Luca Di Angelo et al.

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2020)

添加到收藏夹

Article Engineering, Environmental

Virgin or recycled? Optimal pricing of 3D printing platform and material suppliers in a closed-loop competitive circular supply chain

Luoyi Sun et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

添加到收藏夹

Article Engineering, Industrial

A modified tabu search algorithm for the single-machine scheduling problem using additive manufacturing technology

Marcello Fera et al.

INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING COMPUTATIONS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Environmentally Sustainable Management of 3D Printing Network: Decision Support for 3D Printing Work Allocation

Jungmok Ma

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Industrial

Toolpath allocation and scheduling for concurrent fused filament fabrication with multiple extruders

Yu Jin et al.

IISE TRANSACTIONS (2019)

添加到收藏夹

Article Engineering, Industrial

Job sizing and sequencing in additive manufacturing to control process deterioration

Yossi Luzon et al.

IISE TRANSACTIONS (2019)

添加到收藏夹

Article Management

Cost-driven build orientation and bin packing of parts in Selective Laser Melting (SLM)

Valeriya Griffiths et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Investigating the effects of learning and forgetting on the feasibility of adopting additive manufacturing in supply chains

Hamid Afshari et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

A three-dimensional-printing-based agile and ubiquitous additive manufacturing system

Tin-Chih Toly Chen et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

MILP models to minimise makespan in additive manufacturing machine scheduling problems

Ibrahim Kucukkoc

COMPUTERS & OPERATIONS RESEARCH (2019)

添加到收藏夹

Article Automation & Control Systems

A dynamic order acceptance and scheduling approach for additive manufacturing on-demand production

Qiang Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

An advanced IoT system for assisting ubiquitous manufacturing with 3D printing

Toly Chen et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Fuzzy approach for production planning by using a three-dimensional printing-based ubiquitous manufacturing system

Tin-Chih Toly Chen

AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFACTURING (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Production planning for cloud-based additive manufacturing-A computer vision-based approach

Wang Yuanbin et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Determination of optimal build orientation for additive manufacturing using Muirhead mean and prioritised average operators

Yuchu Qin et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2019)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Moving to additive manufacturing for spare parts supply

N. Knofius et al.

COMPUTERS IN INDUSTRY (2019)

添加到收藏夹

Article Engineering, Industrial

The influence of additive manufacturing on the configuration of make-to-order spare parts supply chain under heterogeneous demand

Yao Li et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)

添加到收藏夹

Review Engineering, Industrial

Analysis of irregular three-dimensional packing problems in additive manufacturing: a new taxonomy and dataset

Luiz J. P. Araujo et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2019)

添加到收藏夹

Article Engineering, Mechanical

Modeling and analysis of the on-demand spare parts supply using additive manufacturing

Yuan Zhang et al.

RAPID PROTOTYPING JOURNAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selection of 3D printer based on FAHP integrated with GRA-TOPSIS

Sundararaj Raghavendra Prabhu et al.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Selecting low-cost 3D printers using the AHP method: a case study

J. M. Justino Netto et al.

SN APPLIED SCIENCES (2019)

添加到收藏夹

Proceedings Paper Computer Science, Artificial Intelligence

Distributed 3D Printing Services in Cloud Manufacturing: A Non-cooperative Game-Theory-Based Selection Method

Sicheng Liu et al.

METHODS AND APPLICATIONS FOR MODELING AND SIMULATION OF COMPLEX SYSTEMS (2019)

添加到收藏夹

Proceedings Paper Automation & Control Systems

Redistributed manufacturing of spare parts: an agent-based modelling approach

Yousef Haddad et al.

52ND CIRP CONFERENCE ON MANUFACTURING SYSTEMS (CMS) (2019)

添加到收藏夹

Proceedings Paper Computer Science, Hardware & Architecture

An Optimization Model for the Design of Additive Manufacturing Supply Chains

Filipe M. de Brito et al.

2019 IEEE 17TH INTERNATIONAL CONFERENCE ON INDUSTRIAL INFORMATICS (INDIN) (2019)

添加到收藏夹

Article Engineering, Industrial

An Additive Manufacturing Spare Parts Inventory Model for an Aviation Use Case

Thembani Togwe et al.

ENGINEERING MANAGEMENT JOURNAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Decision making methodology for the selection of 3D printer under fuzzy environment

Sundararaj Raghavendra Prabhu et al.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2019)

添加到收藏夹

Proceedings Paper Automation & Control Systems

Order acceptance and scheduling in direct digital manufacturing with additive manufacturing

Qiang Li et al.

IFAC PAPERSONLINE (2019)

添加到收藏夹

Proceedings Paper Automation & Control Systems

Reducing resupply time with additive manufacturing in spare part supply chain

A. Cestana et al.

IFAC PAPERSONLINE (2019)

添加到收藏夹

Article Engineering, Manufacturing

Optimisation of multi-part production in additive manufacturing for reducing support waste

Jingchao Jiang et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2019)

添加到收藏夹

Article Engineering, Manufacturing

Distributed or centralized? A novel supply chain configuration of additively manufactured biomedical implants for southeastern US States

Adindu Emelogu et al.

CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

Multi-task scheduling of distributed 3D printing services in cloud manufacturing

Longfei Zhou et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Mechanical

A new method for single-layer-part nesting in additive manufacturing

Yicha Zhang et al.

RAPID PROTOTYPING JOURNAL (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dynamic Supply Chain Design and Operations Plan for Connected Smart Factories with Additive Manufacturing

Byung Do Chung et al.

APPLIED SCIENCES-BASEL (2018)

添加到收藏夹

Article Engineering, Industrial

Impact of additive manufacturing on aircraft supply chain performance: A system dynamics approach

Abhijeet Ghadge et al.

JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT (2018)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Production scheduling and nesting in additive manufacturing

Akram Chergui et al.

COMPUTERS & INDUSTRIAL ENGINEERING (2018)

添加到收藏夹

Article Engineering, Industrial

Part decomposition and 2D batch placement in single-machine additive manufacturing systems

Yosep Oh et al.

JOURNAL OF MANUFACTURING SYSTEMS (2018)

添加到收藏夹

Article Engineering, Mechanical

The FaaS system using additive manufacturing for personalized production

Hyoung Seok Kang et al.

RAPID PROTOTYPING JOURNAL (2018)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Planning and Scheduling in Additive Manufacturing

Filip Dvorak et al.

INTELIGENCIA ARTIFICIAL-IBEROAMERICAL JOURNAL OF ARTIFICIAL INTELLIGENCE (2018)

添加到收藏夹

Article Engineering, Industrial

A modified genetic algorithm for time and cost optimization of an additive manufacturing single-machine scheduling

M. Fera et al.

INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING COMPUTATIONS (2018)

添加到收藏夹

Review Engineering, Manufacturing

Part decomposition and assembly-based (Re) design for additive manufacturing: A review

Yosep Oh et al.

ADDITIVE MANUFACTURING (2018)

添加到收藏夹

Article Engineering, Manufacturing

Multi-criteria optimization of the part build orientation (PBO) through a combined meta-modeling/NSGAII/TOPSIS method for additive manufacturing processes

S. Khodaygan et al.

INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2018)

添加到收藏夹

Article Engineering, Manufacturing

Hybrid manufacturing - integrating traditional manufacturers with additive manufacturing (AM) supply chain

Danielle Strong et al.

ADDITIVE MANUFACTURING (2018)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Build orientation optimization for multi-part production in additive manufacturing

Yicha Zhang et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2017)

添加到收藏夹

Article Engineering, Industrial

Additive manufacturing technology in spare parts supply chain: a comparative study

Yao Li et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)

添加到收藏夹

Article Computer Science, Information Systems

Optimizing product manufacturability in 3D printing

Yu Han et al.

FRONTIERS OF COMPUTER SCIENCE (2017)

添加到收藏夹

Article Engineering, Industrial

Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation

Martin Baumers et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)

添加到收藏夹

Article Engineering, Industrial

Topological network design of closed finite capacity supply chain networks

J. MacGregor Smith et al.

JOURNAL OF MANUFACTURING SYSTEMS (2017)

添加到收藏夹

Article Engineering, Industrial

Multi-objective optimization analysis for part-to-Printer assignment in a network of 3D fused deposition modeling

Kasin Ransikarbum et al.

JOURNAL OF MANUFACTURING SYSTEMS (2017)

添加到收藏夹

Article Engineering, Mechanical

Selection of additive manufacturing processes

Yuanbin Wang et al.

RAPID PROTOTYPING JOURNAL (2017)

添加到收藏夹

Proceedings Paper Engineering, Industrial

A Cloud-based Platform for Automated Order Processing in Additive Manufacturing

Jan-Peer Rudolph et al.

MANUFACTURING SYSTEMS 4.0 (2017)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Production planning in additive manufacturing and 3D printing

Qiang Li et al.

COMPUTERS & OPERATIONS RESEARCH (2017)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

Additive manufacturing in offsite repair of consumer electronics

Sergei Chekurov et al.

16TH NORDIC LASER MATERIALS PROCESSING CONFERENCE, NOLAMP16 (2017)

添加到收藏夹

Article Automation & Control Systems

Customized production based on distributed 3D printing services in cloud manufacturing

Jingeng Mai et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Simulation based method considering design for additive manufacturing and supply chain An empirical study of lamp industry

Ming-Chuan Chiu et al.

INDUSTRIAL MANAGEMENT & DATA SYSTEMS (2016)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Two-dimensional placement optimization for multi-parts production in additive manufacturing

Yicha Zhang et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2016)

添加到收藏夹

Article Business

Additive manufacturing for consumer-centric business models: Implications for supply chains in consumer goods manufacturing

Marcel Bogers et al.

TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE (2016)

添加到收藏夹

Proceedings Paper Automation & Control Systems

A Study on the Effects of Additive Manufacturing on the Structure of Supply Networks

A. Barz et al.

IFAC PAPERSONLINE (2016)

添加到收藏夹

Article Engineering, Manufacturing

Additive manufacturing of biomedical implants: A feasibility assessment via supply-chain cost analysis

Adindu Emelogu et al.

ADDITIVE MANUFACTURING (2016)

添加到收藏夹

Article Computer Science, Software Engineering

Dapper: Decompose-and-Pack for 3D Printing

Xuelin Chen et al.

ACM TRANSACTIONS ON GRAPHICS (2015)

添加到收藏夹

Article Engineering, Industrial

Process planning for additive and subtractive manufacturing technologies

Stephen T. Newman et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Industrial

A methodological framework for the inclusion of modern additive manufacturing into the production portfolio of a focused factory

Ch. Achillas et al.

JOURNAL OF MANUFACTURING SYSTEMS (2015)

添加到收藏夹

Article Computer Science, Information Systems

HAPE3D-a new constructive algorithm for the 3D irregular packing problem

Xiao Liu et al.

FRONTIERS OF INFORMATION TECHNOLOGY & ELECTRONIC ENGINEERING (2015)

添加到收藏夹

Article Engineering, Manufacturing

Additive Manufacturing in an End-to-End Supply Chain Setting

Alex Scott et al.

3D PRINTING AND ADDITIVE MANUFACTURING (2015)

添加到收藏夹

Proceedings Paper Physics, Applied

Cost Estimation of Laser Additive Manufacturing of Stainless Steel

Heidi Piili et al.

15TH NORDIC LASER MATERIALS PROCESSING CONFERENCE, NOLAMP 15 (2015)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Additive manufacturing in the spare parts supply chain

Siavash H. Khajavi et al.

COMPUTERS IN INDUSTRY (2014)

添加到收藏夹

Article Engineering, Industrial

Additive manufacturing: A framework for implementation

Stephen Mellor et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Evaluating and Enhancing Three-Dimensional Printing Service Providers for Rapid Prototyping Using the DEMATEL Based Network Process and VIKOR

Shin Liao et al.

MATHEMATICAL PROBLEMS IN ENGINEERING (2014)

添加到收藏夹

Article Engineering, Mechanical

Application of Fuzzy VIKOR for selection of rapid prototyping technologies in an agile environment

S. Vinodh et al.

RAPID PROTOTYPING JOURNAL (2014)

添加到收藏夹

Article Engineering, Mechanical

An integrated decision-making model for multi-attributes decision-making (MADM) problems in additive manufacturing process planning

Yicha Zhang et al.

RAPID PROTOTYPING JOURNAL (2014)

添加到收藏夹

Article Computer Science, Software Engineering

Efficient parts nesting schemes for improving stereolithography utilization

Vassilios Canellidis et al.

COMPUTER-AIDED DESIGN (2013)

添加到收藏夹

Article Green & Sustainable Science & Technology

Transparency Built-in Energy Consumption and Cost Estimation for Additive Manufacturing

Martin Baumers et al.

JOURNAL OF INDUSTRIAL ECOLOGY (2013)

添加到收藏夹

Article Computer Science, Artificial Intelligence

A hybrid method using experiment design and grey relational analysis for multiple criteria decision making problems

Peng Wang et al.

KNOWLEDGE-BASED SYSTEMS (2013)

添加到收藏夹

Article Engineering, Manufacturing

3D printer selection: A decision-making evaluation and ranking model

D. A. Roberson et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2013)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

An experimental design approach using TOPSIS method for the selection of computer-integrated manufacturing technologies

Yusuf Tansel Ic

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2012)

添加到收藏夹

Proceedings Paper Engineering, Industrial

3D Nesting of Complex Shapes

E. Lutters et al.

45TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS 2012 (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

Group decision making based on novel fuzzy modified TOPSIS method

Behnam Vandani et al.

APPLIED MATHEMATICAL MODELLING (2011)

添加到收藏夹

Article Computer Science, Artificial Intelligence

A fuzzy logic application for selecting layered manufacturing techniques

Samir Khrais et al.

EXPERT SYSTEMS WITH APPLICATIONS (2011)

添加到收藏夹

Article Automation & Control Systems

Applications of the MOORA method for decision making in manufacturing environment

Shankar Chakraborty

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)

添加到收藏夹

Article Engineering, Mechanical

Proposal and evaluation of a KBE-RM selection system

Javier Munguia et al.

RAPID PROTOTYPING JOURNAL (2011)

添加到收藏夹

Article Mathematics, Applied

Mathematical model and efficient algorithms for object packing problem

N. Chernov et al.

COMPUTATIONAL GEOMETRY-THEORY AND APPLICATIONS (2010)

添加到收藏夹

Article Engineering, Industrial

Decision making in the manufacturing environment using an improved PROMETHEE method

R. Venkata Rao et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2010)

添加到收藏夹

Article Engineering, Mechanical

Scheduling and process planning for multiple material stereolithography

Hochan Kim et al.

RAPID PROTOTYPING JOURNAL (2010)

添加到收藏夹

Article Mathematics, Applied

Translational packing of arbitrary polytopes

Jens Egeblad et al.

COMPUTATIONAL GEOMETRY-THEORY AND APPLICATIONS (2009)

添加到收藏夹

Article Management

Placement of two- and three-dimensional irregular shapes for inertia moment and balance

Jens Egeblad

INTERNATIONAL TRANSACTIONS IN OPERATIONAL RESEARCH (2009)

添加到收藏夹

Article Engineering, Industrial

Intelligent layout planning for rapid prototyping

A. S. Gogate et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2008)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Selection of layered manufacturing techniques by an adaptive AHP decision model

Antonio Armillotta

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2008)

添加到收藏夹

Article Management

Fast neighborhood search for two- and three-dimensional nesting problems

Jens Egeblad et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2007)

添加到收藏夹

Article Engineering, Industrial

Rapid prototyping process selection using graph theory and matrix approach

R. Venkata Rao et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Pre-processing methodology for optimizing stereolithography apparatus build performance

V. Canellidis et al.

COMPUTERS IN INDUSTRY (2006)

添加到收藏夹

Article Automation & Control Systems

A decision support system for the selection of a rapid prototyping process using the modified TOPSIS method

HS Byun et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2005)

添加到收藏夹

Article Operations Research & Management Science

Packing of convex polytopes into a parallelepiped

YG Stoyan et al.

OPTIMIZATION (2005)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Decision support in concurrent engineering -: The utility-based selection decision support problem

MG Fernández et al.

CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS (2005)

添加到收藏夹

Article Engineering, Industrial

Decision support system for rapid prototyping process selection through integration of fuzzy synthetic evaluation and an expert system

H Lan et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2005)

添加到收藏夹

Article Engineering, Industrial

Optimal part deposition orientation in FDM by using a multicriteria genetic algorithm

PM Pandey et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2004)

添加到收藏夹

Article Engineering, Manufacturing

Optimum part deposition orientation in fused deposition modeling

K Thrimurthulu et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Model layout optimization for solid ground curing rapid prototyping processes

X Zhang et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2002)

添加到收藏夹

Article Engineering, Industrial

Determination of fabricating orientation and packing in SLS process

SM Hur et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.