相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Microstructural study and mechanical characterisation of heat-treated direct metal laser sintered Ti6Al4V for biomedical applications
Dheepa Srinivasan et al.
MATERIALS TECHNOLOGY (2022)
Effect of Laser Shock Peening on Properties of Heat-Treated Ti-6Al-4V Manufactured by Laser Powder Bed Fusion
Inkyu Yeo et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)
A review on the state-of-the-art of surface finishing processes and related ISO/ASTM standards for metal additive manufactured components
Jian-Yuan Lee et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2021)
Fatigue crack growth behavior of laser powder bed fusion additive manufactured Ti-6Al-4V: Roles of post heat treatment and build orientation
M. Tarik Hasib et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Mechanical properties and in vitro cytocompatibility of dense and porous Ti-6Al-4V ELI manufactured by selective laser melting technology for biomedical applications
Santhosh Suresh et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
Scanning strategy in selective laser melting (SLM): a review
Haolin Jia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Effect of ultrasonic shot peening on microstructure evolution and corrosion resistance of selective laser melted Ti-6Al-4V alloy
Qi Zhang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Spatter Formation and Splashing Induced Defects in Laser-Based Powder Bed Fusion of AlSi10Mg Alloy: A Novel Hydrodynamics Modelling with Empirical Testing
Asif Ur Rehman et al.
METALS (2021)
Metal additive manufacturing in aerospace: A review
Byron Blakey-Milner et al.
MATERIALS & DESIGN (2021)
Influence of Powder Bed Temperature on the Microstructure and Mechanical Properties of Ti-6Al-4V Alloy Fabricated via Laser Powder Bed Fusion
Lei-Lei Xing et al.
MATERIALS (2021)
Additive Manufacturing of Porous Ti6Al4V Alloy: Geometry Analysis and Mechanical Properties Testing
Radovan Hudak et al.
APPLIED SCIENCES-BASEL (2021)
Influence of local heat flow variations on geometrical deflections, microstructure, and tensile properties of Ti-6Al-4 V products in powder bed fusion systems
Igor Drstvensek et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
How Does Scaffold Porosity Conduct Bone Tissue Regeneration?
Hossein Mohammadi et al.
ADVANCED ENGINEERING MATERIALS (2021)
The effect of post-processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel
Qi Chao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effect of heat treatment on microstructure and tribological behavior of Ti?6Al?4V alloys fabricated by selective laser melting
Jiang Ju et al.
TRIBOLOGY INTERNATIONAL (2021)
Investigation of Microstructure and Mechanical Properties for Ti-6Al-4V Alloy Parts Produced Using Non-Spherical Precursor Powder by Laser Powder Bed Fusion
Jaime Varela et al.
MATERIALS (2021)
Effect of energy density and scanning strategy on densification, microstructure and mechanical properties of 316L stainless steel processed via selective laser melting
Taban Larimian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Enhancement of the Damping Behavior of Ti6Al4V Alloy through the Use of Trabecular Structure Produced by Selective Laser Melting
Jacopo Fiocchi et al.
ADVANCED ENGINEERING MATERIALS (2020)
Corrosion behavior of GO-reinforced TC4 nanocomposites manufactured by selective laser melting
Xin Liu et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2020)
Multi-objective optimisation of bio-inspired lightweight sandwich structures based on selective laser melting
Liang Meng et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Selective laser melted titanium implants play a positive role in early osseointegration in type 2 diabetes mellitus rats
Yansheng Duan et al.
DENTAL MATERIALS JOURNAL (2020)
High-performance integrated additive manufacturing with laser shock peening -induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components
Jinzhong Lu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)
Microstructural tailoring of As-Selective Laser Melted Ti6Al4V alloy for high mechanical properties
Yangli Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Additive manufactured porous biomaterials targeting orthopedic implants: A suitable combination of mechanical, physical and topological properties
F. Bartolomeu et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Effect of rescanning cycles on the characteristics of selective laser melting of Ti6Al4V
Zhongxu Xiao et al.
OPTICS AND LASER TECHNOLOGY (2020)
Gaseous surface hardening of Ti-6Al-4V fabricated by selective laser melting
Emilie H. Valente et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Modified wear behavior of selective laser melted Ti6Al4V alloy by direct current assisted ultrasonic surface rolling process
Zhen Wang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
As-fabricated surface morphologies of Ti-6Al-4V samples fabricated by different laser processing parameters in selective laser melting
Snehashis Pal et al.
ADDITIVE MANUFACTURING (2020)
Functionalized TiCu/Ti-Cu-N-Coated 3D-Printed Porous Ti6Al4V Scaffold Promotes Bone Regeneration through BMSC Recruitment
Yu Guo et al.
ADVANCED MATERIALS INTERFACES (2020)
Rationally designed functionally graded porous Ti6Al4V scaffolds with high strength and toughness built via selective laser melting for load-bearing orthopedic applications
Yin-Ze Xiong et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)
Microstructural feature and mechanical property in different building directions of additive manufactured Ti6Al4V alloy
Kun Chang et al.
MATERIALS LETTERS (2020)
Effect of Industrial Heat Treatment and Barrel Finishing on the Mechanical Performance of Ti6Al4V Processed by Selective Laser Melting
Filippo Nalli et al.
APPLIED SCIENCES-BASEL (2020)
Evolution of the metallurgical properties of Ti-6Al-4V, produced with different laser processing parameters, at constant energy density in selective laser melting Check updates
Snehashis Pal et al.
RESULTS IN PHYSICS (2020)
Study of residual stress in selective laser melting of Ti6Al4V
Zhongxu Xiao et al.
MATERIALS & DESIGN (2020)
Use of Non-Spherical Hydride-Dehydride (HDH) Powder in Powder Bed Fusion Additive Manufacturing
Sneha P. Narra et al.
ADDITIVE MANUFACTURING (2020)
Comparison study on microstructure and mechanical properties of Ti-6Al-4V alloys fabricated by powder-based selective-laser-melting and sintering methods
Q. Yan et al.
MATERIALS CHARACTERIZATION (2020)
Study of pore defect and mechanical properties in selective laser melted Ti6Al4V alloy based on X-ray computed tomography
Wei Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Precision turning analysis of Ti-6Al-4V skin produced by selective laser melting using a design of experiment approach
G. Le Coz et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
A novel design, analysis and 3D printing of Ti-6Al-4V alloy bio-inspired porous femoral stem
Hassan Mehboob et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2020)
Influence of beam diameter on Laser Powder Bed Fusion (L-PBF) process
M. C. Sow et al.
ADDITIVE MANUFACTURING (2020)
A comprehensive review: metrology in additive manufacturing and 3D printing technology
Hitesh D. Vora et al.
PROGRESS IN ADDITIVE MANUFACTURING (2020)
Laser welding of selective laser melted Ti6Al4V: Microstructure and mechanical properties
Timo Rautio et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Investigation into the dynamic mechanical properties of selective laser melted Ti-6Al-4V alloy at high strain rate tensile loading
Liu Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Ti6Al4V-PEEK multi-material structures - design, fabrication and tribological characterization focused on orthopedic implants
F. Bartolomeu et al.
TRIBOLOGY INTERNATIONAL (2019)
Additive manufacturing of Ti6Al4V alloy: A review
Shunyu Liu et al.
MATERIALS & DESIGN (2019)
The effect of heat treatment on microstructure evolution and tensile properties of selective laser melted Ti6Al4V alloy
Zulei Liang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Optimization of processing parameters and establishment of a relationship between microstructure and mechanical properties of SLM titanium alloy
Zhen Wang et al.
OPTICS AND LASER TECHNOLOGY (2019)
Process Structure Property Relationships in Selective Laser Melting of Porosity Graded Gyroids
Dalia Mahmoud et al.
JOURNAL OF MEDICAL DEVICES-TRANSACTIONS OF THE ASME (2019)
Estimates of the mechanical properties of laser powder bed fusion Ti-6Al-4V parts using finite element models
Qi Zhang et al.
MATERIALS & DESIGN (2019)
Additive manufacturing for space: status and promises
Enea Sacco et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Process-property-geometry correlations for additively-manufactured Ti-6Al-4V sheets
Behzad Fotovvati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Effect of Laser Energy Density, Internal Porosity and Heat Treatment on Mechanical Behavior of Biomedical Ti6Al4V Alloy Obtained with DMLS Technology
Mierzejewska Zaneta Anna
MATERIALS (2019)
Characterization of the Structural and Tribological Properties of Medical Ti6Al4V Alloy Produced in Different Production Parameters Using Selective Laser Melting
Gurkan Kaya et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2019)
Understanding the effects of PBF process parameter interplay on Ti-6Al-4V surface properties
Trina Majumdar et al.
PLOS ONE (2019)
Effect of Build Orientation on the Corrosion Behavior and Mechanical Properties of Selective Laser Melted Ti-6Al-4V
Qingxuan Sui et al.
METALS (2019)
Achieving Ti6Al4V alloys with both high strength and ductility via selective laser melting
Jiangwei Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Reducing porosity at the starting layers above supporting bars of the parts made by Selective Laser Melting
Snehashis Pal et al.
POWDER TECHNOLOGY (2019)
Anisotropy in ?? martensite and compression behavior of Ti6Al4V prepared by selective laser melting
Bingxuan Qiao et al.
MATERIALS RESEARCH EXPRESS (2019)
Effect of nano-yttria stabilized zirconia addition on the microstructure and mechanical properties of Ti6Al4V parts manufactured by selective laser melting
Amine Hattal et al.
MATERIALS & DESIGN (2019)
Additive Manufacturing for Repair and Restoration in Remanufacturing: An Overview from Object Design and Systems Perspectives
Rahito et al.
PROCESSES (2019)
Tensile properties of selective laser melting products affected by building orientation and energy density
Snehashis Pal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Rapid fabrication of ion optics by selective laser melting
Miguel Sangregorio et al.
RAPID PROTOTYPING JOURNAL (2019)
Optimization of SLM process parameters for Ti6Al4V medical implants
Mahmoud Elsayed et al.
RAPID PROTOTYPING JOURNAL (2019)
Mechanical Properties and Microstructure of DMLS Ti6Al4V Alloy Dedicated to Biomedical Applications
Zaneta Anna Mierzejewska et al.
MATERIALS (2019)
Effect of Scanning Strategy During Selective Laser Melting on Surface Topography, Porosity, and Microstructure of Additively Manufactured Ti-6Al-4V
Emilie Hordum Valente et al.
APPLIED SCIENCES-BASEL (2019)
Assessment of the fatigue performance of heat-treated addictive manufactured TiAl6V4 specimens
L. P. Borrego et al.
25TH INTERNATIONAL CONFERENCE ON FRACTURE AND STRUCTURAL INTEGRITY (2019)
Additive Manufacturing of Titanium Alloys for Orthopedic Applications: A Materials Science Viewpoint
Trina Majumdar et al.
ADVANCED ENGINEERING MATERIALS (2018)
Corrosion assessment of Ti-6Al-4V fabricated using laser powder-bed fusion additive manufacturing
Tse-Ming Chiu et al.
ELECTROCHIMICA ACTA (2018)
Effect of laser energy density on microstructures and mechanical properties of selective laser melted Ti-6Al-4V alloy
Wen-Hou Wei et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2018)
Dilution of Al and V through laser powder deposition enables a continuously compositionally Ti/Ti6Al4V graded structure
Yang Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting
Xingchen Yan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V
Haider Ali et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks
Marco Simonelli et al.
MATERIALS CHARACTERIZATION (2018)
A study of the microstructures and mechanical properties of Ti6A14V fabricated by SLM under vacuum
Bin Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V
Haider Ali et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Optimising the process parameters of selective laser melting for the fabrication of Ti6Al4V alloy
Zhonghua Li et al.
RAPID PROTOTYPING JOURNAL (2018)
Microstructural characteristic and mechanical property of Ti6Al4V alloy fabricated by selective laser melting
Beibei He et al.
VACUUM (2018)
Selective Laser Melting Produced Ti-6Al-4V: Post-Process Heat Treatments to Achieve Superior Tensile Properties
Gerrit M. Ter Haar et al.
MATERIALS (2018)
Influence of Inherent Surface and Internal Defects on Mechanical Properties of Additively Manufactured Ti6Al4V Alloy: Comparison between Selective Laser Melting and Electron Beam Melting
Michaela Fousova et al.
MATERIALS (2018)
Research on Selective Laser Melting of Ti6Al4V: Surface Morphologies, Optimized Processing Zone, and Ductility Improvement Mechanism
Di Wang et al.
METALS (2018)
Angle defines attachment: Switching the biological response to titanium interfaces by modifying the inclination angle during selective laser melting
Avik Sarker et al.
MATERIALS & DESIGN (2018)
Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys
A. B. Spierings et al.
MATERIALS & DESIGN (2018)
Tensile behavior of Ti-6Al-4V alloy fabricated by selective laser melting: effects of microstructures and as-built surface quality
Pan Tao et al.
CHINA FOUNDRY (2018)
Evolution of metallurgical properties of Ti-6Al-4V alloy fabricated in different energy densities in the Selective Laser Melting technique
Snehashis Pal et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
45S5 BAG-Ti6A14V structures: The influence of the design on some of the physical and chemical interactions that drive cellular response
F. Melo-Fonseca et al.
MATERIALS & DESIGN (2018)
A processing diagram for high-density Ti-6Al-4V by selective laser melting
Yinmin (Morris) Wang et al.
RAPID PROTOTYPING JOURNAL (2018)
Macro-micron-nano-featured surface topography of Ti-6Al-4V alloy for biomedical applications
Da-Peng Zhao et al.
RARE METALS (2018)
Resistance of direct metal laser sintered Ti6Al4V alloy against growth of fatigue cracks
R. Konecna et al.
ENGINEERING FRACTURE MECHANICS (2017)
New Development in Selective Laser Melting of Ti-6Al-4V: A Wider Processing Window for the Achievement of Fully Lamellar α plus β Microstructures
E. W. Lui et al.
JOM (2017)
Experimental Research on Selective Laser Melting AlSi10Mg Alloys: Process, Densification and Performance
Zhen Chen et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Effect of Annealing Treatments on the Microstructure, Mechanical Properties and Corrosion Behavior of Direct Metal Laser Sintered Ti-6Al-4V
Yangzi Xu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Numerical and experimental investigations of micro and macro characteristics of direct metal laser sintered Ti-6Al-4V products
Patcharapit Promoppatum et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Tribological behavior of Ti6Al4V cellular structures produced by Selective Laser Melting
F. Bartolomeu et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Promising characteristics of gradient porosity Ti-6Al-4V alloy prepared by SLM process
Michaela Fousova et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)
Microstructures and mechanical properties of Ti6Al4V alloy fabricated by multi-laser beam selective laser melting
Fangzhi Li et al.
MATERIALS LETTERS (2017)
Comparison on mechanical anisotropies of selective laser melted Ti-6Al-4V alloy and 304 stainless steel
Hanchen Yu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and mechanical property of selective laser melted Ti6Al4V dependence on laser energy density
Jie Han et al.
RAPID PROTOTYPING JOURNAL (2017)
Wear behavior of Ti6Al4V biomedical alloys processed by selective laser melting, hot pressing and conventional casting
F. Bartolomeu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)
Comparison of Single Ti6Al4V Struts Made Using Selective Laser Melting and Electron Beam Melting Subject to Part Orientation
Volker Weissmann et al.
METALS (2017)
Is the energy density a reliable parameter for materials synthesis by selective laser melting?
K. G. Prashanth et al.
MATERIALS RESEARCH LETTERS (2017)
Dimensional accuracy of internal cooling channel made by selective laser melting (SLM) And direct metal laser sintering (DMLS) processes in fabrication of internally cooled cutting tools
S. A. C. Ghani et al.
2ND INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION AND GREEN VEHICLE (AIGEV 2016) (2017)
Influence of small particles inclusion on selective laser melting of Ti-6Al-4V powder
Haijun Gong et al.
4TH INTERNATIONAL CONFERENCE ON MECHANICAL, MATERIALS AND MANUFACTURING (ICMMM 2017) (2017)
Process Optimization and Microstructure Characterization of Ti6Al4V Manufactured by Selective Laser Melting
Li Junfeng et al.
2017 4TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS, MECHANICS AND STRUCTURAL ENGINEERING (4TH AMMSE 2017) (2017)
Influences of processing parameters on surface roughness of Hastelloy X produced by selective laser melting
Yang Tian et al.
ADDITIVE MANUFACTURING (2017)
An overview of powder granulometry on feedstock and part performance in the selective laser melting process
Jun Hao Tan et al.
ADDITIVE MANUFACTURING (2017)
The role of additive manufacturing in the era of Industry 4.0
Ugur M. Dilberoglu et al.
27TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING, FAIM2017 (2017)
Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
Lai-Chang Zhang et al.
ADVANCED ENGINEERING MATERIALS (2016)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Investigation of the microstructure and surface morphology of a Ti6Al4V plate fabricated by vacuum selective laser melting
Yuji Sato et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)
A study on the residual stress during selective laser melting (SLM) of metallic powder
Yang Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Ductility improvement due to martensite α′ decomposition in porous Ti-6Al-4V parts produced by selective laser melting for orthopedic implants
E. Sallica-Leva et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Predictive models for physical and mechanical properties of Ti6Al4V produced by Selective Laser Melting
F. Bartolomeu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Sliding wear of selective laser melting processed Ti6Al4V under boundary lubrication conditions
Y. Zhu et al.
WEAR (2016)
Performance of High Layer Thickness in Selective Laser Melting of Ti6Al4V
Xuezhi Shi et al.
MATERIALS (2016)
Role of molten pool mode on formability, microstructure and mechanical properties of selective laser melted Ti-6A1-4V alloy
Jingjing Yang et al.
MATERIALS & DESIGN (2016)
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Jingjing Yang et al.
MATERIALS & DESIGN (2016)
The effect of laser energy input on the microstructure, physical and mechanical properties of Ti-6Al-4V alloys by selective laser melting
Dang Khoa Do et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
In-process sensing in selective laser melting (SLM) additive manufacturing
Thomas G. Spears et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2016)
Influence of finish machining on the surface integrity of Ti6Al4V produced by Selective Laser Melting
Samuel Milton et al.
3RD CIRP CONFERENCE ON SURFACE INTEGRITY (2016)
Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition
W. Xu et al.
ACTA MATERIALIA (2015)
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Galina Kasperovich et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes
H. Attar et al.
MATERIALS LETTERS (2015)
Review of selective laser melting: Materials and applications
C. Y. Yap et al.
APPLIED PHYSICS REVIEWS (2015)
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
H. Attar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Residual stresses in selective laser sintering and selective laser melting
Peter Mercelis et al.
RAPID PROTOTYPING JOURNAL (2006)