相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Design of solute clustering during thermomechanical processing of AA6016 Al-Mg-Si alloy
Suqin Zhu et al.
ACTA MATERIALIA (2021)
Microstructure characterization and mechanism of fatigue crack propagation of 6082 aluminum alloy joints
Xuan Meng et al.
MATERIALS CHEMISTRY AND PHYSICS (2021)
Kinetics of phase precipitation in Al-Mg-Si alloys subjected to equal-channel angular pressing during subsequent heating
N. R. Bochvar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Thermomechanical roll bonding of Al-6063 strips
Akash Biradar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Hot deformation and dynamic recrystallization in Al-Mg-Si alloy
Jiachen Li et al.
MATERIALS CHARACTERIZATION (2021)
Effect of second-phase particle evolution in a twin-roll-casted Al-Mg-Si alloy on recrystallization texture and mechanical anisotropy
Bing Lu et al.
MATERIALS CHARACTERIZATION (2021)
Grain refinement of Al -Mg -Si alloy without any mechanical deformation and matrix phase transformation via cyclic electro-pulsing treatment
Dong Pan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Quantifying geometrically necessary dislocation density during hot deformation in AA6082 Al alloy
Jing-Hua Zheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Insight to the evolution of nano precipitates by cryo rolling plus warm rolling and their effect on mechanical properties in Al 6061 alloy
Maruff Hussain et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The nanocluster formation and vacancy behavior of step-quenched Al-Mg-Si alloy and its effect on transition to β phase via advanced methods
SeongNyeong Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The effect of chemical patterning induced by cyclic plasticity on the formation of precipitates during aging of an Al-Mg-Si alloy
Liting Shi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Microstructural evolution at the initial stage of two-step aging in an Al-Mg-Si alloy characterized by a three dimensional atom probe
Min Young Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Multiaxial deformation behavior of aluminum alloy 6061 subjected to fire damage
S. B. Puplampu et al.
MECHANICS OF MATERIALS (2021)
Flow behavior and fracture of Al-Mg-Si alloy at cryogenic temperatures
Danielle Cristina Camilo Magalhaes et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)
Microstructure, mechanical properties and deformation characteristics of Al-Mg-Si alloys processed by a continuous expansion extrusion approach
Ruiqing Lu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
On the microstructural origins of improvements in conductivity by heavy deformation and ageing of Al-Mg-Si alloy 6101
Jonas K. Sunde et al.
MATERIALS CHARACTERIZATION (2021)
An exploration of microstructural in-homogeneity in the 6082 Al alloy processed through room temperature multi-axial forging
Nikhil Kumar
MATERIALS CHARACTERIZATION (2021)
Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification
Ze-Tian Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Structures and formation mechanisms of dislocation-induced precipitates in relation to the age-hardening responses of Al-Mg-Si alloys
Y. X. Lai et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Quantified contribution of β and β′ precipitates to the strengthening of an aged Al-Mg-Si alloy
Mingjun Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effects of grain structure related precipitation on corrosion behavior and corrosion fatigue property of Al-Mg-Si alloy
Yu Wang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Effects of Mn content on recrystallization resistance of AA6082 aluminum alloys during post-deformation annealing
Xiaoming Qian et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Equal-channel angular pressing influencing the mean stress sensitivity in the high cycle fatigue regime of the 6082 aluminum alloy
Lisa Winter et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructural evolution and strengthening mechanism of an Al-Si-Mg alloy processed by high-pressure torsion with different heat treatments
X. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructure, mechanical properties and wear resistance of an Al-Mg-Si alloy produced by equal channel angular pressing
Manping Liu et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2020)
Deformation and strengthening analysis of Al-Mg-Si alloy sheet during hot with die
Xiaobo Fan et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Stability of 6082-T6 aluminum alloy columns under axial forces at high temperatures
HuiHuan Ma et al.
THIN-WALLED STRUCTURES (2020)
Microstructure and mechanical properties of Al-Mg-Si alloy U-shaped profile
Xiang-dong Wang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)
β needle-shape precipitate formation in Al-Mg-Si alloy: Phase field simulation and experimental verification
Hong Mao et al.
COMPUTATIONAL MATERIALS SCIENCE (2020)
Microstructures and fatigue behavior of metal-inert-gas-welded joints for extruded Al-Mg-Si alloy
Sen Lin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of the processing parameters of friction stir processing on the microstructure and mechanical properties of 6063 aluminum alloy
Honglong Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of natural ageing or pre-ageing on the evolution of precipitate structure and strength during age hardening of Al-Mg-Si alloy AA 6016
O. Engler et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of Annealing on Mechanical Properties and Metallurgical Factors of Ultrafine-Grained 6082 Al Alloy
N. Kumar et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)
Al 6082 alloy strengthening through low strain multi-axial forging
N. Kumar et al.
MATERIALS CHARACTERIZATION (2019)
Improvement of the mechanical properties of Al-Mg-Si alloys with nano-scale precipitates after repetitive continuous extrusion forming and T8 tempering
Jiamin Hu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Hot-Compression Response of Solution-Treated Al-Mg-Si Alloy
N. Kumar et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Microstructure evolution and physical-based diffusion constitutive analysis of Al-Mg-Si alloy during hot deformation
Shuhui Liu et al.
MATERIALS & DESIGN (2019)
Effect of pre-ageing on natural secondary ageing and paint bake hardening in Al-Mg-Si alloys
Yang Zi et al.
MATERIALIA (2019)
Correlation of fracture toughness with microstructural features for ultrafine-grained 6082 Al alloy
N. Kumar et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
The influence of metallurgical factors on low cycle fatigue behavior of ultra-fine grained 6082 Al alloy
N. Kumar et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Formulation of initial artificial age-hardening response in an Al-Mg-Si alloy based on the cluster classification using a high-detection-efficiency atom probe
Yasuhiro Aruga et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Enhanced strength and electrical conductivity of ultrafine-grained Al-Mg-Si alloy processed by hydrostatic extrusion
Kamil Majchrowicz et al.
MATERIALS CHARACTERIZATION (2018)
Effect of deformation path on texture and tension properties of submicrocrystalline Al-Mg-Si alloy fabricated by differential speed rolling
H. W. Yang et al.
MATERIALS LETTERS (2018)
Influence of deformation and annealing on electrical conductivity, mechanical properties and texture of Al-Mg-Si alloy cables
Jiayi Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
High cycle fatigue behavior of the severely plastically deformed 6082 aluminum alloy with an anodic and plasma electrolytic oxide coating
Lisa Winter et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Plane stress fracture toughness of cryorolled 6082 Al alloy
N. Kumar et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Influence of different solution methods on microstructure, precipitation behavior and mechanical properties of Al-Mg-Si alloy
Guan-jun Gao et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)
Effect of alloy composition on hot deformation behavior of some Al-Mg-Si alloys
Daniel Odoh et al.
VACUUM (2018)
Superior mechanical properties induced by the interaction between dislocations and precipitates in the electro-pulsing treated Al-Mg-Si alloys
Yi-tong Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Influence of different shot peening treatments on surface state and fatigue behaviour of Al 6063 alloy
Juan Gonzalez et al.
ENGINEERING FRACTURE MECHANICS (2017)
Electric current-assisted deformation behavior of Al-Mg-Si alloy under uniaxial tension
Moon-Jo Kim et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Effect of Ag and Cu additions on natural aging and precipitation hardening behavior in Al-Mg-Si alloys
Yaoyao Weng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effect of grain boundary misorientaton, deformation temperature and AlFeMnSi-phase on fatigue life of 6082 Al alloy
Nikhil Kumar et al.
MATERIALS CHARACTERIZATION (2017)
Investigation of tensile behaviour of cryorolled and room temperature rolled 6082 Al alloy
Vineet Kumar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
A study on fracture toughness and strain rate sensitivity of severely deformed Al 6063 alloys processed by multiaxial forging and rolling at cryogenic temperature
S. S. Lokesh Vendra et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Concurrent precipitation and associated texture evolution in AA 6082 alloy during high pressure torsion (HPT) processing
A. P. Murugesan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effect of deformation temperature on precipitation, microstructural evolution, mechanical and corrosion behavior of 6082 Al alloy
Nikhil Kumar et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)
Ab initio modelling of the early stages of precipitation in Al-6000 alloys
Daniele Giofre et al.
ACTA MATERIALIA (2017)
Modeling over-ageing in Al-Mg-Si alloys by a multi-phase CALPHAD-coupled Kampmann-Wagner Numerical model
Qiang Du et al.
ACTA MATERIALIA (2017)
Precipitation phenomena in ultrafine grained Al-Mg-Si alloy with heterogeneous microstructure
Witold Chrominski et al.
ACTA MATERIALIA (2016)
Characterization and micromechanical modelling of microstructural heterogeneity effects on ductile fracture of 6xxx aluminium alloys
F. Hannard et al.
ACTA MATERIALIA (2016)
Effect of aging treatment on the microstructure and flow behavior of 6063 aluminum alloy compressed over a wide range of strain rate
Tuo Ye et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)
Flow behavior and microstructure evolution of 6A82 aluminium alloy with high copper content during hot compression deformation at elevated temperatures
Qun-ying Yang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Optimization of electrical conductivity and strength combination by structure design at the nanoscale in Al-Mg-Si alloys
X. Sauvage et al.
ACTA MATERIALIA (2015)
Microstructure, plastic deformation and strengthening mechanisms of an Al-Mg-Si alloy with a bimodal grain structure
M. Shakoori Oskooie et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Investigations of the microstructural response to a cold forging process of the 6082-T6 alloy
J. Bouquerel et al.
MATERIALS & DESIGN (2015)
Combination of sever plastic deformation and precipitation hardening processes affecting the mechanical properties in Al-Mg-Si alloy
Bahman Mirzakhani et al.
MATERIALS & DESIGN (2015)
Hot deformation behavior and processing map of Al-Si-Mg alloys containing different amount of silicon based on Gleebe-3500 hot compression simulation
Hengcheng Liao et al.
MATERIALS & DESIGN (2015)
Effect of cryorolling and annealing on recovery, recrystallisation, grain growth and their influence on mechanical and corrosion behaviour of 6082 Al alloy
Nikhil Kumar et al.
MATERIALS CHEMISTRY AND PHYSICS (2015)
Strength, grain refinement and solute nanostructures of an Al-Mg-Si alloy (AA6060) processed by high-pressure torsion
G. Sha et al.
ACTA MATERIALIA (2014)
Mechanism of weld formation during very-high-power ultrasonic additive manufacturing of Al alloy 6061
S. Shimizu et al.
ACTA MATERIALIA (2014)
Detailed atomistic insight into the β phase in Al-Mg-Si alloys
Per Harald Ninive et al.
ACTA MATERIALIA (2014)
Mechanical Properties and Microstructure of 6082-T6 Aluminum Alloy Joints by Self-support Friction Stir Welding
Long Wan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2014)
Effect of Post Cryorolling Treatments on Microstructural and Mechanical Behaviour of Ultrafine Grained Al-Mg-Si Alloy
P. Nageswara Rao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2014)
Microstructure and mechanical properties of multi-pass friction stir processed aluminum alloy 6063
Khaled J. Al-Fadhalah et al.
MATERIALS & DESIGN (2014)
Mechanical properties and microstructural evolution of Al 6061 alloy processed by multidirectional forging at liquid nitrogen temperature
P. Nageswara Rao et al.
MATERIALS & DESIGN (2014)
Effect of cryorolling and warm rolling on precipitation evolution in Al 6061 alloy
P. Nageswara Rao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
The effects of quench rate and pre-deformation on precipitation hardening in Al-Mg-Si alloys with different Cu amounts
Takeshi Saito et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
The effect of simultaneous deformation and annealing on the precipitation behaviour and mechanical properties of an Al-Mg-Si alloy
Katharina Teichmann et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Hierarchical nanostructures strengthen Al-Mg-Si alloys processed by deformation and aging
S. H. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Extrusion die geometry effects on the energy absorbing properties and deformation response of 6063-type Al-Mg-Si aluminum alloy
O. P. Gbenebor et al.
RESULTS IN PHYSICS (2013)
A model for the thermodynamics of and strengthening due to co-clusters in Al-Mg-Si-based alloys
M. J. Starink et al.
ACTA MATERIALIA (2012)
The influence of multi-pass friction stir processing on the microstructural and mechanical properties of Aluminum Alloy 6082
Magdy M. El-Rayes et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
A combination of severe plastic deformation and ageing phenomena in Al-Mg-Si Alloys
Majid Vaseghi et al.
MATERIALS & DESIGN (2012)
Effects of warm rolling and ageing after cryogenic rolling on mechanical properties and microstructure of Al 6061 alloy
P. Nageswara Rao et al.
MATERIALS & DESIGN (2012)
Microstructures and mechanical properties of HPT processed 6063 Al alloy
Mousumi Das et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Combined effect of deformation and artificial aging on mechanical properties of Al-Mg-Si Alloy
Michal Kolar et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Mechanisms controlling the artificial aging of Al-Mg-Si Alloys
S. Pogatscher et al.
ACTA MATERIALIA (2011)
Development of ultrafine-grained Al 6063 alloy by cryorolling with the optimized initial heat treatment conditions
Sushanta Kumar Panigrahi et al.
MATERIALS & DESIGN (2011)
Evaluation of the tribological properties of an Al-Mg-Si alloy processed by severe plastic deformation
E. Ortiz-Cuellar et al.
WEAR (2011)
Microstructure evolution of 6061 O Al alloy during ultrasonic consolidation: An insight from electron backscatter diffraction
E. Mariani et al.
ACTA MATERIALIA (2010)
Effect of friction stir processing on fatigue behavior of an investment cast Al-7Si-0.6 Mg alloy
S. Jana et al.
ACTA MATERIALIA (2010)
ECAP with back pressure for optimum strength and ductility in aluminium alloy 6016. Part 1: Microstructure
P. W. J. Mckenzie et al.
ACTA MATERIALIA (2010)
ECAP with back pressure for optimum strength and ductility in aluminium alloy 6016. Part 2: Mechanical properties and texture
P. W. J. Mckenzie et al.
ACTA MATERIALIA (2010)
A DSC study on the precipitation kinetics of cryorolled Al 6063 alloy
S. K. Panigrahi et al.
MATERIALS CHEMISTRY AND PHYSICS (2010)
Strengthening study on 6082 Al alloy after combination of aging treatment and ECAP process
S. Dadbakhsh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effect of aging on mechanical properties of 6063 Al-alloy using instrumented ball indentation technique
G. Das et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Plasticity associated with grain boundaries during the bending of an Al-Mg-Si-based alloy
D. J. Lloyd et al.
SCRIPTA MATERIALIA (2010)
Development of ultrafine grained Al-Mg-Si alloy with enhanced strength and ductility
Sushanta Kumar Panigrahi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
A study of flow characteristics of nanostructured Al-6082 alloy produced by ECAP under upsetting test
Ahmed S. M. Aena
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Effect of plastic deformation conditions on microstructural characteristics and mechanical properties of Al 6063 alloy
Sushanta Kumar Panigrahi et al.
MATERIALS & DESIGN (2009)
The effect of strain rate on the deformation mechanisms and the strain rate sensitivity of an ultra-fine-grained Al alloy
I. Sabirov et al.
SCRIPTA MATERIALIA (2009)
Enhanced ductility and deformation mechanisms of ultrafine-grained Al-Mg-Si alloy in sheet form at warm temperatures
W. J. Kim et al.
SCRIPTA MATERIALIA (2009)
Effect of precipitate morphology evolution on the strength-toughness relationship in Al-Mg-Si alloys
S. P. Yuan et al.
SCRIPTA MATERIALIA (2009)
Severe plastic deformation (SPD) processes for metals
A. Azushima et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Thixoforging experiments with 6082 extrusion feedstock
Yuecel Birol
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Effect of cryorolling on microstructure of Al-Mg-Si alloy
Sushanta Kumar Panigrahi et al.
MATERIALS LETTERS (2008)
Dynamic precipitation during severe plastic deformation of an Al-Mg-Si aluminium alloy
Hans J. Roven et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Deformation structures in 6082 aluminium alloy after severe plastic deformation by equal-channel angular pressing
Manping Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Effect of rolling temperature on microstructure and mechanical properties of 6063 Al alloy
S. K. Panigrahi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
A study on the mechanical properties of cryorolled Al-Mg-Si alloy
Sushanta Kumar Panigrahi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T6
A. Simar et al.
ACTA MATERIALIA (2007)
Deformation behavior of Al-Mg-Si alloy at the elevated temperature
Y.-N. Kwon et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
The influence of back pressure on ECAP processed. AA 6016: Modeling and experiment
P. W. J. Mckenzie et al.
ACTA MATERIALIA (2007)
Phase stability and structural features of matrix-embedded hardening precipitates in Al-Mg-Si alloys in the early stages of evolution
M. A. van Huis et al.
ACTA MATERIALIA (2007)
Texture analysis of a friction stir processed 6061-T6 aluminum alloy using neutron diffraction
W. Woo et al.
ACTA MATERIALIA (2006)
Influence of severe plastic deformation on aging of Al-Mg-Si alloys
E Cerri et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Microstructure and stability of nanocrystalline aluminum 6061 created by large strain machining
MR Shankar et al.
ACTA MATERIALIA (2005)
The effect of predeformation on the β and β′ precipitates and the role of Q′ phase in an Al-Mg-Si alloy;: AA6022
RS Yassar et al.
SCRIPTA MATERIALIA (2005)
Pre-straining to improve the bake hardening response of a twin-roll cast Al-Mg-Si alloy
Y Birol
SCRIPTA MATERIALIA (2005)
Influence of microstructure on deformation behavior and fracture mode of Al-Mg-Si alloys
D Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Cube recrystallization textures in a hot deformed Al-Mg-Si alloy
S de La Chapelle
SCRIPTA MATERIALIA (2001)
The morphology of Portevin-Le Chatelier bands: Finite element simulation for Al-Mg-Si
S Zhang et al.
ACTA MATERIALIA (2001)