4.7 Review

Temperature effect of photovoltaic cells: a review

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Physics, Condensed Matter

Fluorescent quinoline carboxylate derivative: Study on the optical properties and photo diode application

M. M. EL-Shabaan et al.

Summary: The study focused on the optical properties of thin films of HPQC processed using thermal deposition technique, finding potential applications in optical sensors. By investigating the effects of film thickness, ultraviolet radiation, and emission properties, along with the impact of UV irradiation on bandgap, a deeper understanding of the material was achieved. The fabrication of a heterojunction device and exploration of its characteristics, such as response to temperature and illumination, as well as the study of current limitation mechanisms in reverse bias, shed light on the device's potential for light detection and current control.

PHYSICA B-CONDENSED MATTER (2022)

Article Green & Sustainable Science & Technology

Experimental research on the convective heat transfer coefficient of photovoltaic panel

Weiwei Hu et al.

Summary: Convective heat transfer between wind and photovoltaic (PV) panels can cause fluctuations in PV cell temperature and performance, which negatively impact grid-connected solar energy. This study investigates the effect of dust on the convective heat transfer coefficient of PV panels, finding that the maximum value occurs at a dust deposition density of 20 g/m(2). Additionally, dusty PV modules have a slightly higher average heat transfer coefficient compared to clean PV panels.

RENEWABLE ENERGY (2022)

Article Energy & Fuels

Radiative cooling of solar cells with scalable and high-performance nanoporous anodic aluminum oxide

Huajie Tang et al.

Summary: Improving the transmittance of solar cell cover can efficiently enhance photovoltaic performance, but heating from unavailable solar irradiation has a significant adverse impact. A radiative cooler using nanoporous anodic aluminum oxide can passively dissipate heat and effectively cool solar cells. The cooler demonstrates high infrared emissivity and excellent solar transmittance, enhancing overall performance and efficiency of solar cells.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Article Energy & Fuels

Bifacial semi-transparent ultra-thin Cu(In,Ga)Se2 solar cells on ITO substrate: How ITO thickness and Na doping influence the performance

Yong Li et al.

Summary: The study optimized ultra-thin CIGSe on In2O3:Sn (ITO) and found that the thickness of ITO and NaF treatment significantly affect the performance of BSTUT CIGSe solar cells. Thicker ITO and higher NaF treatment dose can reduce the Schottky barrier at the ITO/CIGSe interface.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Review Chemistry, Physical

The impact of electrode with carbon materials on safety performance of lithium-ion batteries: A review

Xiaomei Jiang et al.

Summary: This review explores the influence of carbon materials on the safety of lithium-ion batteries, highlighting their importance as electrodes and in thermal runaway processes. It also summarizes measures for improving carbon electrode materials and their impact on battery safety.

CARBON (2022)

Article Engineering, Environmental

Long-life and dendrite-free zinc metal anode enabled by a flexible, green and self-assembled zincophilic biomass engineered MXene based interface

Liwen Tan et al.

Summary: By coating a flexible and self-assembled biomass engineered MXene film on the surface of zinc foil, researchers have found an effective way to protect zinc, suppress dendrite growth, and improve the reversibility and lifespan of zinc electrodes. This work brings new insights into the practical design of highly reversible zinc metal anodes.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Performance and potential of a novel floating photovoltaic system in Egyptian winter climate on calm water surface

Nabil A. S. Elminshawy et al.

Summary: This article investigates the performance of a partially submerged floating photovoltaic system (PSFPV) as a proposal for harvesting solar energy. The results show that the PSFPV system achieves a reduction in operating temperature and produces more electricity compared to a land-based photovoltaic system (LPV). The PSFPV system also has the potential to reduce CO2 emissions and lower the levelized cost of electricity (LCOE).

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Review Green & Sustainable Science & Technology

Review of printed circuit heat exchangers and its applications in solar thermal energy

Yuan Ma et al.

Summary: This paper provides a comprehensive review on critical aspects of Printed Circuit Heat Exchangers (PCHE) and its applications in solar thermal energy systems. The development process, manufacturing technology, channel configurations, thermo-hydraulic performance, and potential improvements are summarized and analyzed. Future research directions are also suggested.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Article Green & Sustainable Science & Technology

Experimental investigations on unglazed photovoltaic-thermal (PVT) system using water and nanofluid cooling medium

Govind S. Menon et al.

Summary: The study evaluated the electrical and thermal performance of an unglazed photovoltaic thermal system with a serpentine coil setup and compared the effects of water and copper oxide-based nanofluid cooling. The results showed that the nanofluid-cooled system had higher thermal efficiency, overall efficiency, and achieved the highest energy-saving efficiency.

RENEWABLE ENERGY (2022)

Review Energy & Fuels

A review on advancements, challenges, and prospective of copper and non-copper based thin-film solar cells using facile spray pyrolysis technique

Karthikeyan Vijayan et al.

Summary: This review discusses the importance and innovations of thin-film-based solar cells as a sustainable energy source. It examines the physicochemical properties of thin-film materials deposited via spray pyrolysis and their application in solar cells. The review also analyzes the advancements and pros and cons of copper and non-copper thin film-based photovoltaics. Lastly, it provides insights into the future developments and recycling of thin-film based photovoltaics.

SOLAR ENERGY (2022)

Review Chemistry, Physical

Perovskite solar cells based self-charging power packs: Fundamentals, applications and challenges

Yang Yang et al.

Summary: Perovskite solar cells are strong contenders for next generation photovoltaic technology due to their low cost, simple structure, and high efficiency. However, their intermittent nature requires integration with energy storage systems, such as supercapacitors or lithium-ion batteries, to provide sustainable and reliable power output.

NANO ENERGY (2022)

Review Chemistry, Physical

Stability of quantum dot-sensitized solar cells: A review and prospects

Akash S. Rasal et al.

Summary: This review discusses the factors influencing the performance stability of QDSSCs and provides insights into the mechanisms causing degraded performances. It also presents cutting-edge strategies for improving the overall performance stability of QDSSCs.

NANO ENERGY (2022)

Proceedings Paper Materials Science, Multidisciplinary

Review of next generation photovoltaic solar cell technology and comparative materialistic development

Neeraj Kant et al.

Summary: With the increasing concern for the impact of conventional energy on global warming and climate change, solar photovoltaic (PV) cell technology has become widely used as a sustainable energy source. Recent technological development in solar cell research can be categorized into different generations, with each generation influencing the market and vice versa. The first and second-generation solar cells are based on moderate-cost technologies and higher-efficiency manufacturing processes. The third and fourth generations introduce novel materials and innovative designs, utilizing more efficient but costly cells.

MATERIALS TODAY-PROCEEDINGS (2022)

Proceedings Paper Materials Science, Multidisciplinary

Modelling and simulation of silicon solar cells using PC1D

Bhim Singh et al.

Summary: A basic silicon solar cell has been designed and simulated using PC1D simulator, and optimum values for the base layer thickness and temperature have been determined. It has been observed that these optimum values enhance the efficiency and fill factor of the solar cell.

MATERIALS TODAY-PROCEEDINGS (2022)

Article Chemistry, Physical

Multilayer emitter of molybdenum oxide/silver/molybdenum oxide thin films for silicon heterojunction solar cells: Device fabrication and electrical characterization

M. M. Makhlouf et al.

Summary: In this study, the MoOx/Ag/MoOx stack was investigated as an alternative for simplified heterojunction crystalline silicon solar cells. The optical characteristics of the stack were studied, and it was found to be suitable for the front side of the solar cell. A device structure was fabricated using thermal evaporation, and impedance spectroscopy measurements were performed to analyze the junction formation and Ohmic contacts. The temperature-dependent characteristics of the built-in potential, doping concentration, and depletion width were determined using capacitance-voltage measurements. The photovoltaic performance of the solar cell was also evaluated under illumination.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Nanoscience & Nanotechnology

Enhancement of the photoelectric properties of composite oxide TiO2-SrTiO3 thin films

Jun Li et al.

Summary: This study successfully fabricated TiO2-SrTiO3 composite oxide thin films via sol-gel method and investigated their crystal phase, surface morphology, and chemical compositions through various characterizations. The results show that the composite oxide exhibits enhanced photoelectric properties, with the photoluminescence spectrum closely related to charge carrier trapping information. Additionally, first-principle calculations based on DFT provided insights into the energy band and state density of the composite oxide, deepening understanding of its photoelectric properties and electron structure for potential optoelectronic device applications.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Article Environmental Sciences

Performance analysis of photovoltaic-thermal air collectors combined with a water to air heat exchanger for renewed air conditioning in building

Oussama Hachchadi et al.

Summary: This study investigates a new solar system that combines PVT air collectors with a water-to-air heat exchanger to provide energy for cooling and heating in a building, saving total energy consumption and reducing greenhouse gas emissions. A numerical model is developed to ensure comfortable temperatures during summer, winter, and peak energy consumption days, showing various energy-saving effects.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Article Thermodynamics

Three dimensional analysis of dye-sensitized, perovskite and monocrystalline silicon solar photovoltaic cells under non uniform solar flux

Preeti Singh et al.

Summary: In this study, three dimensional analysis of solar cells under non-uniform solar flux was conducted, aiming to obtain an analytical expression for the three dimensional non-uniform temperature distribution of the cell. The effects of wind direction, wind speed, inclination, and solar irradiance on temperature distribution, heat losses and cell efficiency were investigated for different types of solar cells. The results showed that efficiency decreases with an increase in wind azimuthal from 0 degrees to 90 degrees for all types of solar cells.

APPLIED THERMAL ENGINEERING (2021)

Article Nanoscience & Nanotechnology

Improving thermal conductivity of ethylene propylene diene monomer/paraffin/expanded graphite shape-stabilized phase change materials with great thermal management potential via green steam explosion

Xinpeng Hu et al.

Summary: The EPDM/PW/EG SSPCMs fabricated via steam explosion method show enhanced thermal conductivity, allowing faster heat absorption and dissipation for improved thermal management properties. Additionally, these materials exhibit excellent shape recovery properties and adaptability.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Multidisciplinary Sciences

Effect of dual surface cooling of solar photovoltaic panel on the efficiency of the module: experimental investigation

Ephraim Bonah Agyekum et al.

Summary: The study evaluated the impact of simultaneous dual surface cooling on the output performance of solar photovoltaic modules, showing that cooling the module using this method can improve power output by around 30% and electrical efficiency by around 11.9%.

HELIYON (2021)

Article Thermodynamics

Thermal analysis of water-cooled photovoltaic cell by applying computational fluid dynamics

Guanghua Wu et al.

Summary: The article discusses the use of PV modules and the importance of water cooling in thermal management for PV cells. Numerical simulations were conducted to study the impact of environmental factors on cell efficiency and temperature, with results showing that water cooling can enhance efficiency and stabilize temperature.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Thermodynamics

An experimental work on the performance of solar cell cooled by flat heat pipe

Aly M. A. Soliman et al.

Summary: The experimental study showed that increasing the heat pipe condenser length and decreasing its adiabatic regions led to higher efficiency and output power of the solar cell. However, cell efficiency decreased with higher incident radiation intensity.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Article Energy & Fuels

Investigation of photochemical conversion processes in aromatic hydrocarbons of Balakhani oil

Ulviyya Yolchuyeva et al.

Summary: By studying the Balakhani oil, it was separated into four groups of aromatics, with each group undergoing photo-conversion processes at different rates. The third and fourth groups, which undergo slow conversion, are recommended for use as petroleum luminophores. Petroleum luminophores based on these groups exhibit variable luminescence properties, with their spectral-luminescence properties range also determined.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2021)

Article Energy & Fuels

Investigation on non-uniform temperature distribution in a solar cell with associated laser beam heating

Han Zhai et al.

Summary: The study found that under the same sunlight exposure, the region of a solar cell with higher initial temperature absorbs more heat energy and reaches a higher final temperature compared to the region with lower initial temperature. Additionally, the difference in temperature rise between high and low temperature regions is approximately proportional to the initial temperature difference.

SOLAR ENERGY (2021)

Article Engineering, Aerospace

Full-spectrum selective thin film based photonic cooler for solar cells of space solar power station

Guanheng Fan et al.

Summary: In this study, a full-spectrum selective thin film photonic cooler for space solar power stations is proposed, demonstrating its effectiveness in reducing the temperature of solar cells and increasing efficiency. The results show the potential application value of this technology in space thermal control technology.

ACTA ASTRONAUTICA (2021)

Article Thermodynamics

A novel strategy of enhancing sky radiative cooling by solar photovoltaic-thermoelectric cooler

Song Lv et al.

Summary: A novel system combining photovoltaic power generation and radiative cooling was proposed to achieve 24-hour operation. The study found that areas with drought and long sunshine time are more suitable for high system performance.

ENERGY (2021)

Article Green & Sustainable Science & Technology

An efficient pulsed- spray water cooling system for photovoltaic panels: Experimental study and cost analysis

Amirhosein Hadipour et al.

Summary: Cooling of photovoltaic panels is crucial for enhancing electrical efficiency and extending lifespan. The use of a pulsed-spray water cooling system can improve efficiency and reduce water consumption. From an economic perspective, pulsed-spray water cooling is an efficient new cooling method.

RENEWABLE ENERGY (2021)

Article Materials Science, Multidisciplinary

Long-term photovoltaic performance of thin-film solar cells with diffractive microlens arrays on glass substrates

Ping Li et al.

Summary: The study focused on the use of diffractive microlens arrays on solar panel devices to enhance photovoltaic performance in high-temperature and abnormal irradiation environments. Results showed that diffractive microlens arrays can increase electricity generation on cloudy days and reduce surface temperature of solar panels on sunny days, demonstrating the importance of selective light collection and conversion in improving solar energy efficiency.

RESULTS IN PHYSICS (2021)

Article Energy & Fuels

Experimental Thermal Hazard Investigation of Pressure and EC/PC/EMC Mass Ratio on Electrolyte

Changcheng Liu et al.

Summary: The study showed that different mass ratios of carbonate solvents and environmental pressure have an impact on the combustion characteristics of the electrolyte, with the combustion process divided into four stages. Decreasing pressure leads to changes in the electrolyte combustion characteristics.

ENERGIES (2021)

Article Materials Science, Multidisciplinary

Effect of substrate temperature on the charge transport property of Ta2O5 cathode buffer layer in inverted polymer solar cells

Jean Maria Fernandes et al.

Summary: The study demonstrates that by depositing Ta2O5 films as cathode buffer layer at different temperatures, the charge extraction ability and power conversion efficiency of inverted polymer solar cells can be improved.

MATERIALS LETTERS (2021)

Article Energy & Fuels

Graphene as a pre-illumination cooling approach for a concentrator photovoltaic (CPV) system

Mussad Alzahrani et al.

Summary: Experimental characterizations show that using graphene as pre-illumination cooling technique can significantly reduce the device temperature in concentrated photovoltaic system, improve the efficiency of solar cells, and is an effective method.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Review Chemistry, Physical

A review on perovskite solar cells (PSCs), materials and applications

N. Suresh Kumar et al.

Summary: Perovskite solar cells have garnered much attention in recent years due to their high power conversion efficiency, simple fabrication process, lightweight nature, and stability. Research has focused on the crystallinity, morphology, synthesis techniques, and potential commercialization feasibility of different layers in perovskite solar cells.

JOURNAL OF MATERIOMICS (2021)

Article Multidisciplinary Sciences

A quantitative roadmap for China towards carbon neutrality in 2060 using methanol and ammonia as energy carriers

Yinan Li et al.

Summary: China's commitment to achieving carbon neutrality by 2060 involves addressing carbon dioxide emissions from the energy and chemical sectors, with coal-to ammonia and coal-to-methanol production being major contributors. The study proposes a possible route to carbon neutrality through energy-chemical nexus, emphasizing the importance of regional cooperation and resource optimization. An optimized combination of fossil fuels and renewable energies forming a ''blue energy economy'' is identified as a feasible and promising solution.

ISCIENCE (2021)

Article Chemistry, Physical

Steric effect of amino-acids as additives for perovskite solar cells

Haobo Yuan et al.

Summary: This study revealed the steric effect of Lewis-acid base additives by applying two amino acids, circular proline and linear glycine. Proline showed better coordination effect in perovskite solar cells, promoting crystal growth and trap states passivation. The research highlights the importance of considering steric effect when choosing and designing Lewis adducts in perovskite solar cells.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Optics

Cellulose-upgraded polymer films for radiative sky cooling

Farsad Imtiaz Chowdhury et al.

Summary: Radiative sky cooling is a mechanism that reduces the temperature of an object by exchanging heat with the cold universe through the sky. A new class of radiative sky cooling material, cellulose-upgraded polymer films, has been developed in this study, demonstrating effective cooling and high cooling power when optimized.

JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER (2021)

Article Energy & Fuels

Radiative cooling of commercial silicon solar cells using a pyramid-textured PDMS film

Ke Wang et al.

Summary: In this study, a periodic pyramid-textured PDMS film was proposed for radiative cooling of encapsulated commercial silicon solar cells. The film showed good emission and transmittance properties, effectively reducing the temperature of the solar cells.

SOLAR ENERGY (2021)

Article Energy & Fuels

Study on the cleaning and cooling of solar photovoltaic panels using compressed airflow

Dacheng Li et al.

Summary: This study investigates a compressed air-based regulation method to simultaneously clean and cool solar PV panels for increasing efficiency and power output. The results of testing validate the effectiveness of this method in mitigating the reductions in efficiency caused by dust accumulation and high temperatures, contributing to improving PV efficiency and promoting decarbonisation in the energy industry.

SOLAR ENERGY (2021)

Article Energy & Fuels

Defect density and performance influenced by ozone treatment of ZnO interface in inverted organic solar cell

Amit Kumar et al.

Summary: The effect of ozone treatment on ZnO as an electron transport layer in organic solar cells was studied, with a 10-minute treatment leading to improved crystallinity and increased short circuit current. SEM and GIXRD analyses confirmed the improved crystallinity, showing a flake-like structure and increased peak intensity. The ozone treatment also decreased defects, improving current density and device efficiency.

SOLAR ENERGY (2021)

Article Energy & Fuels

Controlling the melting and solidification points temperature of PCMs on the performance and economic return of the water-cooled photovoltaic thermal system

Miqdam T. Chaichan et al.

Summary: The hybrid PCM of paraffin and Vaseline showed better performance in PVT systems due to their lower melting point, leading to improved productivity and system performance.

SOLAR ENERGY (2021)

Article Energy & Fuels

Temperature coefficient characterization of CIGSSe solar cells with layer modifications

Hamsa Ahmed et al.

Summary: Cu(In,Ga)(S,Se)2 (CIGSSe) thin film solar cells have lower temperature sensitivity compared to conventional silicon-based technologies. The absorber layer was found to have the largest influence on the temperature dependence of power efficiency, mainly governed by a change in the open-circuit voltage.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Article Energy & Fuels

High-Temperature Perovskite Solar Cells

Zijing Dong et al.

Summary: This study successfully fabricated and studied high-temperature perovskite solar cells, demonstrating excellent stability and power conversion efficiency for potential applications in high-temperature fields such as space exploration.

SOLAR RRL (2021)

Proceedings Paper Materials Science, Multidisciplinary

Significance of phase change material and nanofluid in photovoltaic panel cooling technique: SWOC analysis

Nikhil K. Purwant et al.

Summary: This paper discusses the significance of Phase Change Material and Nanofluid in photovoltaic panel cooling technique, along with the strengths, weaknesses, opportunities, and challenges of various cooling techniques. Research indicates that PCM has the potential to effectively reduce the temperature of PV panels but is currently underutilized due to design limitations, technical challenges, and high costs.

MATERIALS TODAY-PROCEEDINGS (2021)

Article Multidisciplinary Sciences

Impact of absorber layer thickness, defect density, and operating temperature on the performance of MAPbI3 solar cells based on ZnO electron transporting material

Touria Ouslimane et al.

Summary: Through simulation and analysis of various parameters, it was found that low-cost, high-efficiency, and low-temperature PSCs fabrication can be achieved.

HELIYON (2021)

Article Nanoscience & Nanotechnology

Natural methionine-passivated MAPbI3 perovskite films for efficient and stable solar devices

Chaoran Chen et al.

Summary: Using methionine as a passivation agent can significantly reduce trap-state density in perovskite films, improving carrier lifetime and enhancing the optoelectronic properties of solar cells. Solar cells made of methionine-mediated perovskite films exhibit higher photovoltage and improved stability compared to control devices.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

Paraffin/polyethylene/graphite composite phase change materials with enhanced thermal conductivity and leakage-proof

Yifei Xie et al.

Summary: Paraffin, HDPE, and EG were used to prepare composite PCMs. The introduction of HDPE packaging effectively prevented paraffin leakage, while EG significantly improved the heat transfer rate. Through optimization, PCM10-5 showed the best performance with a thermal conductivity of 0.641 W/(m center dot K) and high thermal storage stability.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Article Nanoscience & Nanotechnology

A multifunctional pentlandite counter electrode toward efficient and stable sensitized solar cells

Xiangyang Zeng et al.

Summary: In this study, a mixed ternary pentlandite Ni3Co6S8 is reported as an efficient multifunctional counter electrode for sensitized solar cells (SSCs). Ni3Co6S8 shows good catalytic activity and compatibility with various redox mediators, ensuring good performance preservation for SSCs. This work highlights the potential of pentlandites for high efficiency and stable SSCs.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Review Chemistry, Multidisciplinary

Recent Advances on Carbon Nanotube Utilizations in Perovskite Solar Cells

Qiang Luo et al.

Summary: Metal halide perovskite solar cells (PSCs) are promising next-generation photovoltaic devices with high efficiency, and the utilization of carbon nanotubes (CNTs) in various components of PSCs has shown significant progress.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Numerical Investigation of the Cooling Temperature of the InGaP/InGaAs/Ge Subcells Under the Concentrated Illumination

Kenza Djermane et al.

ZEITSCHRIFT FUR NATURFORSCHUNG SECTION A-A JOURNAL OF PHYSICAL SCIENCES (2020)

Article Green & Sustainable Science & Technology

Novel solar PV/Thermal collector design for the enhancement of thermal and electrical performances

Oussama Rejeb et al.

RENEWABLE ENERGY (2020)

Article Physics, Condensed Matter

Computational modeling of carbon nanotubes for photoresistor applications

M. Shunaid Parvaiz et al.

SOLID STATE COMMUNICATIONS (2020)

Review Chemistry, Physical

Multifunctional nanostructured materials for next generation photovoltaics

Congcong Wu et al.

NANO ENERGY (2020)

Article Green & Sustainable Science & Technology

Multi-performance optimization of nanofluid cooled hybrid photovoltaic thermal system using fuzzy integrated methodology

Ibrahim Ahmed Qeays et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Energy & Fuels

The effect of wind on the temperature distribution of photovoltaic modules

Alok Dhaundiyal et al.

SOLAR ENERGY (2020)

Article Chemistry, Physical

Perovskite Solar Cells go Outdoors: Field Testing and Temperature Effects on Energy Yield

Marko Jost et al.

ADVANCED ENERGY MATERIALS (2020)

Article Green & Sustainable Science & Technology

Implicit regression-based correlations to predict the back temperature of PV modules in the arid region of south Algeria

Nadjem Bailek et al.

RENEWABLE ENERGY (2020)

Article Energy & Fuels

Bulk material based selective infrared emitter for sub-ambient daytime radiative cooling

Yue Yang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Review Thermodynamics

A Review on Recent Development of Cooling Technologies for Photovoltaic Modules

Chunxiao Zhang et al.

JOURNAL OF THERMAL SCIENCE (2020)

Article Materials Science, Multidisciplinary

Organic heterojunctions of phthalocyanine-reduced graphene oxide above percolation threshold for photovoltaic application

Atri Sarkar et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Article Chemistry, Multidisciplinary

The Effect of Heat Sink Properties on Solar Cell Cooling Systems

Zainal Arifin et al.

APPLIED SCIENCES-BASEL (2020)

Article Energy & Fuels

Performance Evaluation of Combined Photovoltaic Thermal Water Cooling System for Hot Climate Regions

M. Salem Ahmed et al.

JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2019)

Review Green & Sustainable Science & Technology

Development and applications of photovoltaic-thermal systems: A review

Yuting Jia et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Article Green & Sustainable Science & Technology

Experimental study of the effect of using phase change materials on the performance of an air-cooled photovoltaic system

Negin Choubineh et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Article Energy & Fuels

Temperature Coefficient of Silicon-Based Carrier Selective Solar Cells

Nithin Chatterji et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2019)

Article Green & Sustainable Science & Technology

Temperature distribution in a photovoltaic module at various mounting and wind conditions: A complete CFD modeling

N. Dabaghzadeh et al.

JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2019)

Article Multidisciplinary Sciences

Stabilizing heterostructures of soft perovskite semiconductors

Yanbo Wang et al.

SCIENCE (2019)

Review Green & Sustainable Science & Technology

Advances in solar photovoltaics: Technology review and patent trends

Mahmood H. Shubbak

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Article Green & Sustainable Science & Technology

Solar photovoltaic based air cooling system for vehicles

Wei Pang et al.

RENEWABLE ENERGY (2019)

Proceedings Paper Green & Sustainable Science & Technology

Analysis of Temperature Dependent Surface Recombination Properties

Rebekka Eberle et al.

9TH INTERNATIONAL CONFERENCE ON CRYSTALLINE SILICON PHOTOVOLTAICS (SILICONPV 2019) (2019)

Article Chemistry, Multidisciplinary

All-Carbon-Electrode-Based Endurable Flexible Perovskite Solar Cells

Qiang Luo et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Chemistry, Physical

Study of Temperature Coefficients for Parameters of Photovoltaic Cells

Daniel Tudor Cotfas et al.

INTERNATIONAL JOURNAL OF PHOTOENERGY (2018)

Article Materials Science, Multidisciplinary

Effect of trap-assisted recombination on open-circuit voltage loss in phthalocyanine/fullerene solar cells

Naoto Shintaku et al.

ORGANIC ELECTRONICS (2018)

Review Green & Sustainable Science & Technology

The causes and effects of degradation of encapsulant ethylene vinyl acetate copolymer (EVA) in crystalline silicon photovoltaic modules: A review

Michele Candida Carvalho de Oliveira et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Green & Sustainable Science & Technology

Comparison of heat sink and water type PV/T collector for polycrystalline photovoltaic panel cooling

Usman Jamil Rajput et al.

RENEWABLE ENERGY (2018)

Article Energy & Fuels

CPV solar cell modeling and metallization optimization

Deepak K. Gupta et al.

SOLAR ENERGY (2018)

Article Energy & Fuels

Comprehensive photonic approach for diurnal photovoltaic and nocturnal radiative cooling

Bin Zhao et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Review Green & Sustainable Science & Technology

Exergetic advancement of photovoltaic/thermal systems (PV/T): A review

Farideh Yazdanifard et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Article Physics, Multidisciplinary

A note on anomalous band-gap variations in semiconductors with temperature

P. K. Chakraborty et al.

INDIAN JOURNAL OF PHYSICS (2018)

Article Thermodynamics

Effects of forced convection on the performance of a photovoltaic thermal system: An experimental study

Alibakhsh Kasaeian et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2017)

Review Green & Sustainable Science & Technology

A review of thin film solar cell technologies and challenges

Taesoo D. Lee et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Engineering, Electrical & Electronic

Computational analysis of temperature effects on solar cell efficiency

Mohammad I. Hossain et al.

JOURNAL OF COMPUTATIONAL ELECTRONICS (2017)

Article Multidisciplinary Sciences

Nerve growth factor signalling in pathology and regeneration of human teeth

Thimios A. Mitsiadis et al.

SCIENTIFIC REPORTS (2017)

Article Chemistry, Multidisciplinary

Nano-Photonic Structures for Light Trapping in Ultra-Thin Crystalline Silicon Solar Cells

Prathap Pathi et al.

NANOMATERIALS (2017)

Article Chemistry, Multidisciplinary

Implication of Blocking Layer Functioning with the Effect of Temperature in Dye-Sensitized Solar Cells

Dongxing Kou et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2016)

Review Green & Sustainable Science & Technology

Uniform cooling of photovoltaic panels: A review

Haitham M. S. Bahaidarah et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Article Energy & Fuels

Defects in perovskite-halides and their effects in solar cells

James M. Ball et al.

NATURE ENERGY (2016)

Article Materials Science, Multidisciplinary

Charge carrier mobility of the organic photovoltaic materials PTB7 and PC71BM and its influence on device performance

Bernd Ebenhoch et al.

ORGANIC ELECTRONICS (2015)

Article Multidisciplinary Sciences

Impact of microstructure on local carrier lifetime in perovskite solar cells

Dane W. deQuilettes et al.

SCIENCE (2015)

Article Energy & Fuels

Fabrication of Cu2SnS3 thin film solar cells using pulsed laser deposition technique

S. A. Vanalakar et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)

Article Energy & Fuels

Physics of the temperature coefficients of solar cells

O. Dupre et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)

Article Physics, Applied

The effect of partial shading on dye-sensitized solar cell module characteristics

Bin Pan et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)

Article Multidisciplinary Sciences

Passive radiative cooling below ambient air temperature under direct sunlight

Aaswath P. Raman et al.

NATURE (2014)

Article Physics, Multidisciplinary

Photocurrent measurements of supercollision cooling in graphene

Matt W. Graham et al.

NATURE PHYSICS (2013)

Article Multidisciplinary Sciences

Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH3NH3PbI3

Guichuan Xing et al.

SCIENCE (2013)

Article Materials Science, Multidisciplinary

Development of thin film a-SiO:H/a-Si:H double-junction solar cells and their temperature dependence

Kobsak Sriprapha et al.

THIN SOLID FILMS (2013)

Proceedings Paper Energy & Fuels

Test performance electrical of the photovoltaic module in two different environments

F. Bandou et al.

TERRAGREEN 13 INTERNATIONAL CONFERENCE 2013 - ADVANCEMENTS IN RENEWABLE ENERGY AND CLEAN ENVIRONMENT (2013)

Review Green & Sustainable Science & Technology

Non-uniform illumination in concentrating solar cells

Hasan Baig et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2012)

Proceedings Paper Energy & Fuels

A Novel Implicit Correlation for the Operative Temperature of a PV Panel

Valerio Lo Brano et al.

AASRI CONFERENCE ON POWER AND ENERGY SYSTEMS (2012)

Article Chemistry, Multidisciplinary

Time-Resolved Picosecond Photocurrents in Contacted Carbon Nanotubes

Leonhard Prechtel et al.

NANO LETTERS (2011)

Article Energy & Fuels

Temperature dependence of polymer/fullerene organic solar cells

W. Bagienski et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)

Article Energy & Fuels

Modeling of the nominal operating cell temperature based on outdoor weathering

Michael Koehl et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)

Review Energy & Fuels

Cooling of photovoltaic cells under concentrated illumination: a critical review

A Royne et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2005)

Article Physics, Multidisciplinary

Extraction current transients: New method of study of charge transport in microcrystalline silicon

G Juska et al.

PHYSICAL REVIEW LETTERS (2000)