期刊
CASE STUDIES IN CONSTRUCTION MATERIALS
卷 17, 期 -, 页码 -出版社
ELSEVIER
DOI: 10.1016/j.cscm.2022.e01395
关键词
Fibre reinforced concrete; Fly ash; Mechanical properties; Polyethylene terephthalate
资金
- Vaal University of Technology department of Industrial Engineering & Operations Management and Mechanical Engineering
This study focuses on predicting and optimizing the fresh and hardened properties of PET fiber reinforced concrete containing partial cement replacement with fly ash. A model was developed to accurately predict the concrete's performance and determine the optimum composition for maximum mechanical strength at the lowest cost. The experimental results validated the predictions, and a good correlation was observed between the actual and predicted values. The study provides valuable insights for optimizing the use of PET fiber reinforced concrete in various applications.
The study focuses on the prediction and optimisation using modelling with respect to the fresh and hardened properties of polyethylene terephthalate (PET) fibre reinforced concrete containing partial cement replacement with fly ash. Full factorial experimental design methodology was employed to fabricate the test specimens by simultaneously varying the independent factors to develop a model for overall response variation. Numerical optimisation was carried out concerning the fibre reinforced concrete's fresh and hardened mechanical properties. Predictive modified quadratic equations were developed for slump value, compressive, flexural, split tensile strength and total cost. Analysis of variance test was carried out for all the responses indicated and the developed model could predict the slump value and mechanical properties of the fibre reinforced concrete correctly and effectively with a coefficient of determination in the range of 0.5-0.9467. The optimum constituent combination for maximum mechanical strength at the lowest possible cost was found to be 15.76 % fly ash and 0.32 % PET fibre. These optimum values corresponded to responses of 25.65 MPa, 3.69 MPa, 2.36 MPa, 31.48 mm, R2744.17 for compressive strength, flexural strength, tensile strength, slump value and total cost, respectively. These predictions were validated experimentally, and a good correlation was observed between the actual and predicted values based on the observed standard deviations of 0.1335, 0.031, 0.005, 0.676, 0.02 for compressive strength, flexural strength, tensile strength, slump value and cost, respectively. Concrete slabs were optimised for various possible end uses, and the optimum PET fibre % and fly ash % were ascertained. The optimum combination for suspended slabs was 19.09 % for fly ash and 0.34 % PET fibre. These values corresponded to responses of R2742.03/ kg/m(3), 2.30 MPa, 3.68 MPa, 24.77 MPa, 30.60 mm for the total cost, split tensile, flexural, compressive strength and slump value. For foundation slabs, the optimum combination was 3.94 % fly ash and 0.65 % PET fibre, and the corresponding response values are R2760.47 /kg/m(3), 1.82 MPa, 3.26 MPa, 19.32 MPa and 10.78 mm for a total cost, split tensile, flexural, compressive strength and slump value, respectively. For paving slabs, the optimum combination was 0.65 % PET fibre giving a response of R2775.13 kg/m(3), 1.41 MPa, 3.29 MPa, 19.11 MPa and 9.92 mm for total cost, split tensile, flexural, compressive strength and slump value, respectively.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据