☆ 4.7 Article

Employing numerical method for evaluating the heat transfer rate of a hot tube by nanofluid natural convection

CASE STUDIES IN THERMAL ENGINEERING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Experimental investigations on the thermal superposition effect of multiple hotspots for embedded microfluidic cooling

Yuxin Ye et al.

Summary: This paper introduces the concept of thermal superposition effect, which can effectively reduce the average temperature of multi-hotspot chips by optimizing the superposition factor. The factor also enables prediction of the temperature change of hotspots.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Environmental

Lanthanum carbonate grafted ZSM-5 for superior phosphate uptake: Investigation of the growth and adsorption mechanism

Yi Yang et al.

Summary: Efficient phosphate removal from wastewater was achieved using the LC-ZSM-5 adsorbent, with an adsorption capacity of 91.2 mg-PO43-/g. Thermodynamic and kinetic studies revealed that phosphate adsorption on LC-ZSM-5 is a spontaneous exothermic process with chemical adsorption playing a crucial role. Regeneration study demonstrated the satisfactory regeneration ability of LC-ZSM-5 for potential industrial applications.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the preferential grain boundary oxidation of a Ni-Co-based superalloy

Jiang Ju et al.

Summary: The study showed that the oxide scale formed on a Ni-Co-based superalloy after oxidation contains internal oxides preferentially along the grain boundaries, mainly composed of equiaxed nano-sized Al2Ti7O15. The presence of a large number of plane defects in Al2Ti7O15 works as fast-diffusion paths for the inward diffusion of oxygen, contributing to the preferential grain boundary oxidation.

CORROSION SCIENCE (2022)

添加到收藏夹

Article Thermodynamics

Embedded cooling method with configurability and replaceability for multi-chip electronic devices

Nan Zhang et al.

Summary: This study demonstrates an embedded cooling method with configurability and replaceability for multi-chip electronic devices. Experimental results show that the cooling effect of chips in the array is not affected by arrangements under the same conditions.

ENERGY CONVERSION AND MANAGEMENT (2022)

添加到收藏夹

Article Engineering, Mechanical

Experimental study of fretting fatigue in dovetail assembly considering temperature effect based on damage mechanics method

Debin Sun et al.

Summary: The study explores fretting fatigue life prediction of dovetail structure in high temperature environment, proposing a new model that considers temperature effect and introducing a criterion for crack initiation failure in fretting fatigue tests. Experimental results show that the new model has high life prediction ability.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Engineering, Marine

Long term effect of operating loads on large monopile-supported offshore wind turbines in sand

Aliyu Abdullahi et al.

Summary: The study focuses on the behavioural patterns of offshore wind turbines, particularly large ones supported on monopiles, to prevent negative impacts on their serviceability arising from modal property and foundation tilt changes. Data collected over 10 years is used to analyze load cases and estimating forces and moments acting on a prototype 10 MW OWT, revealing the potential underestimation of natural frequencies and tilt by fixed amplitude cyclic loads. By conducting long term model tests, the study aims to bridge the gap in understanding and predicting OWT behaviors.

OCEAN ENGINEERING (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Design-eligibility study of solar thermal helically coiled heat exchanging system with annular dimples by irreversibility concept

Yan Cao et al.

Summary: This study designed several helically grooved coils for solar water heating systems and compared them based on the irreversibility concept. It was found that the highest entropy generation can be achieved at higher flow rates (6 lit/min) and with specific groove depth and distance conditions, with the VEC case having the lowest ratio.

RENEWABLE ENERGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure understanding of high Cr-Ni austenitic steel corrosion in high-temperature steam

Zhao Shen et al.

Summary: The microstructure and microchemistry of oxide scales formed on Fe-21Cr-32Ni and Fe-17Cr-9Ni steels after exposure to high-temperature high-pressure steam have been analyzed and compared. The study reveals different internal oxidation behaviors and oxide scale characteristics in the two steels. Further characterization provides insights into the composition and structure of the internal oxidation zone and its impact on mass transfer and reaction product formation.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Thermodynamics

Thermal, thermodynamic and exergoeconomic investigation of a parabolic trough collector utilizing nanofluids

Behzad Vahedi et al.

Summary: The study analyzed the effectiveness of using a glass cover in a parabolic trough collector system to reduce heat losses at low Reynolds numbers. Considering temperature-dependent properties of the oil can greatly reduce the friction factor in the system.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Feasibility and optimal operation of micro energy hybrid system (hydro/wind) in the rural valley region

Nesrine Kefif et al.

Summary: This study introduces a micro-hydro-wind hybrid system to meet the increasing global and local demand for electrical energy and improve the economic feasibility of off-grid renewable energy systems. The research shows that the hydro-wind hybrid system can satisfy the electric load demand in different areas, and the financial cost of the system is inversely proportional to the wind speed and flow rate.

INTERNATIONAL JOURNAL OF LOW-CARBON TECHNOLOGIES (2022)

添加到收藏夹

Article Thermodynamics

Measurement of the thermal conductivity of MWCNT-CuO/water hybrid nanofluid using artificial neural networks (ANNs)

Sara Rostami et al.

Summary: In this paper, artificial neural networks were developed to predict the thermal conductivity of multi-walled carbon nanotubes-CuO/water nanofluid, with the best ANN model and curve fitting method used to predict the behavior of the nanofluid. Results showed that the ANN outperformed in predicting k(nf) with better performance and correlation.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

添加到收藏夹

Article Thermodynamics

Entropic analysis of a double helical tube heat exchanger including circular depressions on both inner and outer tube

Yan Cao et al.

Summary: This research provides an entropic analysis of a double helical tube heat exchanger with circular depressions on both inner and outer tubes, using experimentally validated 3D numerical simulation. The study investigates the entropic characteristics of four different cases, showing that creating circular depressions on both tubes significantly improves heat transfer but also increases entropy generation. Case d, where the outer tube depressions are located between continuous inner tube depressions, demonstrates the highest thermal performance and entropy generation.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Entropy generation and sensitivity analysis of R134a flow condensation inside a helically coiled tube-in-tube heat exchanger

Yan Cao et al.

Summary: Entropy generation analysis is crucial for evaluating heat transfer enhancement and pressure drop in enhanced heat exchangers. This study investigates entropy generation during R134a flow condensation inside a helically coiled tube-in-tube heat exchanger, finding that larger tube diameters and diameter ratios, higher mass and heat fluxes, and lower saturation temperatures result in higher entropy generation. Sensitivity analysis indicates that coils with larger tube diameters are more sensitive to changes in flow conditions, while coils with different coil diameters show similar sensitivity levels.

INTERNATIONAL JOURNAL OF REFRIGERATION (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Impact of Fusion Temperature on Hydrothermal Features of Flow within an Annulus Loaded with Nanoencapsulated Phase Change Materials (NEPCMs) during Natural Convection Process

Seyyed Masoud Seyyedi et al.

Summary: The study investigates the characteristics of free convection flow, entropy generation, and heat transfer of nanoencapsulated phase change materials (NEPCMs) in an enclosure. The numerical results show good agreement with existing literature. The effects of decision variables on entropy generation number and the average Nusselt number are explored.

MATHEMATICAL PROBLEMS IN ENGINEERING (2021)

添加到收藏夹

Article Engineering, Marine

Experimental study on vertical water entry of twin spheres side-by-side

Xu Wang et al.

Summary: The experiment investigates the cavity dynamics and trajectories of twin spheres vertically entering water side-by-side at different time intervals and lateral distances. The results show that the interaction between the spheres changes with the increase of time interval and lateral distance, affecting the motion characteristics of the second water-entry sphere.

OCEAN ENGINEERING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Inducing swirl flow inside the pipes of flat-plate solar collector by using multiple nozzles for enhancing thermal performance

Yan Cao et al.

Summary: This numerical study aims to improve the thermal performance of a flat-plate solar collector by inducing swirl flow inside the tube through the use of nozzles. The study found that a single-nozzle swirl generator exhibited the highest thermal performance factor, outperforming dual, triple, and quad nozzle configurations. The results showed that increasing mass flow rate led to higher heat extraction rate and kinetic energy rate, while decreasing friction factor and outlet temperature. Additionally, the study revealed that the injection angle affected outlet temperature, friction factor, and kinetic energy rate.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Thermal, frictional and exergetic analysis of non-parallel configurations for plate heat exchangers

Yusuf A. Al-Turki et al.

Summary: This study focuses on non-parallel configurations of plate heat exchangers and finds that they are more thermally efficient compared to parallel configurations, providing higher Nusselt numbers and thermal performance factors. The optimal configuration involves hot fluid flowing through the converge channel and cold fluid flowing through the divergent channel.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

添加到收藏夹

Article Mathematical & Computational Biology

FWNNet: Presentation of a New Classifier of Brain Tumor Diagnosis Based on Fuzzy Logic and the Wavelet-Based Neural Network Using Machine-Learning Methods

Mohsen Ahmadi et al.

Summary: This paper introduces a novel neural network classifier based on fuzzy logic and wavelet transformation for brain tumor diagnosis and segmentation. Results show that the FWNNet architecture achieved the highest accuracy in brain tumor diagnosis, and the presented layer demonstrated a high true-positive rate in brain tumor segmentation.

COMPUTATIONAL INTELLIGENCE AND NEUROSCIENCE (2021)

添加到收藏夹

Article Engineering, Chemical

Using Graphene-Based Grease as a Heat Conduction Material for Hectowatt-Level LEDs: A Natural Convection Experiment

Chih-Neng Hsu et al.

Summary: A self-adjusting concentration of graphene thermal grease was developed to reduce the contact surface thermal resistance of 50 W LEDs, achieving seamless heat transfer with high thermal conductivity. Analysis of chip-on-board LEDs with highly concentrated heat sources demonstrated excellent heat dissipation under natural convection, with a heat sink volume thermal capacity of up to 473,750 mm(3). Over 50 W, enhanced forced convection solutions and larger heat sink volumes are required for efficient heat dissipation.

PROCESSES (2021)

添加到收藏夹

Article Thermodynamics

Implementation of phase change materials for thermal regulation of photovoltaic thermal systems: Comprehensive analysis of design approaches

Sandro Nizetic et al.

Summary: This study investigated various PVT-PCM solar collector designs and analyzed the thermal properties of PCM materials used in these systems. Results showed that PVT-PCM collector design greatly impacts system efficiency, with electrical efficiency improvement usually less than 20% and thermal efficiency improvement up to 70%. Existing literature lacks in addressing the economic and environmental evaluation of PVT-PCM systems, highlighting the need for further research in this area.

ENERGY (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Integrating renewable sources into energy system for smart city as a sagacious strategy towards clean and sustainable process

Anh Tuan Hoang et al.

Summary: Renewable energy plays a vital role in smart cities by reducing pollution and improving living environment quality. Designing energy systems based on clean and renewable standards is considered a sustainable solution for smart cities.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

PEM fuel cell cathode-side flow field design optimization based on multi-criteria analysis of liquid-slug dynamics

Yan Cao et al.

Summary: The study aims to improve the efficiency of GDL clearance and liquid residence time by optimizing the geometrical shape of gas channels. The results show that gas channels with a triangular cross-section perform the best in reducing ACR and increasing stable two-phase pressure drop, with a contact angle of 120 degrees recommended for optimal fuel cell performance.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

添加到收藏夹

Article Mechanics

Effects of Brownian motions and thermophoresis diffusions on the hematocrit and LDL concentration/diameter of pulsatile non-Newtonian blood in abdominal aortic aneurysm

Mohammad Abbasi et al.

Summary: The study found that small LDLs had the highest concentration on the wall of abdominal aortic aneurysm, and adding thermophoresis diffusion increased LDL concentration. Maximum Brownian diffusion was observed in vorticity places, and Brownian diffusion decreased while thermophoresis diffusion increased as hematocrit reached 45%.

JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Effect of Inclined Magnetic Field on the Entropy Generation in an Annulus Filled with NEPCM Suspension

Seyyed Masoud Seyyedi et al.

Summary: The study investigated the impact of nanoencapsulated phase change materials on natural convection and entropy generation, with a focus on the effect of inclined magnetic fields. Numerical analysis was used to assess the influence of relevant parameters on the results, and validation of the results indicated good performance of the nanoencapsulated phase change materials in industrial applications.

MATHEMATICAL PROBLEMS IN ENGINEERING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

CFD-based irreversibility analysis of avant-garde semi-O/O-shape grooving fashions of solar pond heat trade-off unit

Chao Liu et al.

Summary: Balancing thermal and frictional factors in spiral piping system design for solar ponds is crucial yet challenging. Various innovative grooving designs were proposed, each with unique thermal and frictional behavior. The study examined the impact of inlet positions on irreversibilities and found significant differences based on the innermost or outermost inlet selection.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Thermal/frictional performance of spiral pipe with ring-shape depression used as in-pond heat exchanger

Yan Cao et al.

Summary: In this study, a simple and cost-effective technique for enhancing heat extraction in salinity-gradient solar ponds was proposed. By increasing turbulence inside the modified piping system, higher heat extraction was achieved without the need for additional equipment. The numerical simulations showed that the thermal performance factor (TPF) values were above 1 for all cases, indicating the justification of the modifications made.

SOLAR ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Investigation of the effect of adding nano-encapsulated phase change material to water in natural convection inside a rectangular cavity

Ehsan Golab et al.

Summary: The study investigates the effects of adding NEPCM nanoparticles to water in natural convection inside a cavity using numerical simulation. It is found that adding NEPCM enhances heat transfer rate of water, with optimal heat transfer occurring at the center of the cavity. The relationship between energy wall and heat transfer rate is explored in the study.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Thermodynamics

Effect of twisted-tape inserts and nanofluid on flow field and heat transfer characteristics in a tube

Wei He et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Thermodynamics

Investigation of entropy generation in a square inclined cavity using control volume finite element method with aided quadratic Lagrange interpolation functions

Seyyed Masoud Seyyedi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Mathematics, Applied

Analysis of hydrothermal characteristics of magnetic Al2O3-H2O nanofluid within a novel wavy enclosure during natural convection process considering internal heat generation

Mohamad Sadegh Sadeghi et al.

MATHEMATICAL METHODS IN THE APPLIED SCIENCES (2020)

添加到收藏夹

Article Energy & Fuels

Magneto-fluid dynamic and second law analysis in a hot porous cavity filled by nanofluid and nano-encapsulated phase change material suspension with different layout of cooling channels

M. Hashemi-Tilehnoee et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Thermodynamics

An experimental and numerical study of forced convection heat transfer from rectangular fins at low Reynolds numbers

R. C. Adhikari et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Engineering, Mechanical

Cu-Al2O3 hybrid nanofluid natural convection in an inclined enclosure with wavy walls partially layered by porous medium

Hakim T. Kadhim et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Thermodynamics

Numerical simulation on the forced convection heat transfer of porous medium for turbine engine heat exchanger applications

Chengzhi Hu et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Heat and fluid flow analysis of metal foam embedded in a double-layered sinusoidal heat sink under local thermal non-equilibrium condition using nanofluid

Hossein Arasteh et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Thermodynamics

Effect of radiation on laminar natural convection of nanofluid in a vertical channel with single- and two-phase approaches

Amir Mostafazadeh et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Physics, Multidisciplinary

Statistical investigation for developing a new model for rheological behavior of Silica-ethylene glycol/Water hybrid Newtonian nanofluid using experimental data

Behrooz Ruhani et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2019)

添加到收藏夹

Article Engineering, Chemical

Mixed convection of non-Newtonian nanofluid in an H-shaped cavity with cooler and heater cylinders filled by a porous material: Two phase approach

Zhixiong Li et al.

ADVANCED POWDER TECHNOLOGY (2019)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Application of Sum of Squares Method in Nonlinear H∞ Control for Satellite Attitude Maneuvers

Fanwei Meng et al.

COMPLEXITY (2019)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

H∞ Optimal Performance Design of an Unstable Plant under Bode Integral Constraint

Fanwei Meng et al.

COMPLEXITY (2018)

添加到收藏夹

Article Thermodynamics

Simultaneous investigations the effects of non-Newtonian nanofluid flow in different volume fractions of solid nanoparticles with slip and no-slip boundary conditions

Ahmad Reza Rahmati et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)

添加到收藏夹

Article Thermodynamics

Computational fluid dynamics simulation of heat transfer and fluid flow characteristics in a vortex tube by considering the various parameters

Abbas Moraveji et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Engineering, Chemical

A comprehensive study of the performance of a heat pipe by using of various nanofluids

Hossein Kavusi et al.

ADVANCED POWDER TECHNOLOGY (2017)

添加到收藏夹

Article Chemistry, Physical

Numerical investigation of nanofluid spraying on an inclined rotating disk for cooling process

M. Sheikholeslami et al.

JOURNAL OF MOLECULAR LIQUIDS (2015)

添加到收藏夹

Article Thermodynamics

Buoyancy Driven Heat Transfer of Nanofluids in a Tilted Enclosure

Kamil Kahveci

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2010)

添加到收藏夹

Article Thermodynamics

Natural Convection Heat Transfer in an Inclined Enclosure Filled with a Water-Cuo Nanofluid

B. Ghasemi et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.