☆ 4.7 Article

The effects of tube Dimples-Protrusions on the thermo-fluidic properties of turbulent forced-convection

CASE STUDIES IN THERMAL ENGINEERING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

A robust single-phase approach for the numerical simulation of heat pipe

Mohammad Hossein Zolfagharnasab et al.

Summary: In this study, a single-phase approach is used for the numerical simulation of heat pipe analysis, simplifying the numerical setup and improving convergence stability and solution time.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Impacts of double rotating cylinders on the forced convection of hybrid nanofluid in a bifurcating channel with partly porous layers

Lioua Kolsi et al.

Summary: The numerical assessment of using double rotating cylinders and partly porous layers in bifurcating channels on hydro-thermal performance found significant impact of rotational speeds and locations on heat transfer, while nanoparticle and porous layer sizes also play a role. The study shows that using nanoparticles in the base fluid can lead to a 26% improvement in heat transfer rate, with varying effects on pressure drop coefficient.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Combined effect of using porous media and nano-particle on melting performance of PCM filled enclosure with triangular double fins

Shu-Bo Chen et al.

Summary: This study investigated the performance of a vertically oriented PCM storage system with different types and combinations of PCM. Lower volume fractions of nanoparticles can enhance melting performance when using nano-PCMs, while using porous media can significantly improve the melting process.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Study of the flow characteristics, pressure drop and augmentation of heat performance in a horizontal pipe with and without twisted tape inserts

Ahmed Ramadhan Al-Obaidi et al.

Summary: The study focused on analyzing the flow and heat transfer characteristics of water within a straight circular pipe with twisted-tape inserts, revealing that the inserts induced noticeable swirling of the flow and significant improvement in heat transfer performance. The wider twisted-tape inserts showed more prominent swirling effects and higher heat transfer enhancements, although accompanied by increased pressure drop along the pipe.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Numerical analysis of heat transfer enhancement and flow characteristics inside cross-combined ellipsoidal dimple tubes

Liang Zhang et al.

Summary: The study found that the heat transfer performance of the crosscombined dimple tube is significantly enhanced compared to the single ellipsoidal dimple tube, by changing temperature distribution and increasing the gradient in the core region. The concave surface profile can disrupt flow and enhance mixing of hot and cold fluids.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Flow and heat transfer in obstacled twisted tubes

Zaher M. A. Alsulaiei et al.

Summary: In this study, the thermal and hydraulic performance of a twisted circular tube with an obstacle attached to the internal surface was numerically analyzed. Increasing obstacle height ratio led to higher Nusselt number but also higher friction factor. The optimal design recommended for higher heat transfer rate requirement is observed at OHR = 0.625.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement around a finned vertical antenna by means of porous media saturated with Water-Copper nanofluid

E. Martin et al.

Summary: The combination of porous media and nanofluids is used to enhance heat transfer around a vertical finned cylindrical antenna, with a new Nusselt-Rayleigh correlation proposed and quantified for different ranges of Rayleigh numbers. Results show significant improvements in Nusselt number compared to the reference case, with enhancements of up to 65% observed in the upper limit region of the span of Rayleigh numbers considered.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Effective efficiency assessment of a solar air heater having baffles spaced with different successive ratios

Nguyen Minh Phu et al.

Summary: This study presents a numerical investigation of an air collector duct with inclined baffles to reduce pressure loss and enhance the efficiency. The results show that using unequal baffle pitch can significantly reduce pressure loss and improve the collector's effective efficiency.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Numerical study on the mixed convection around inclined-pin fins on a heated plate in vertical channels with various bypass ratios

Jun Seok Lee et al.

Summary: The study investigated the mixed convection around inclined-pin fins on a heated plate in a vertical channel for different bypass ratios, calculating solutions of three-dimensional governing equations. Flow patterns, temperature distribution, local and average Nusselt numbers were summarized for various parameter variations, providing insights for heat sink design in practical installation conditions.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Computational and experimental assessment of solar air heater roughened with six different baffles

Sachin Sharma et al.

Summary: This study compared the effects of six different baffles on the heat transfer and friction factors of a solar air heater, with the sine wave baffle shape found to perform the best within a certain range of operating and geometric parameters.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Numerical assessments of flow pattern and heat transfer profile for the round tube equipped with different configurations of the dual-inclined baffle

Amnart Boonloi et al.

Summary: Numerical studies on the heat exchanger tube (HXT) equipped with dual-inclined baffle (DIB) show that the three types of DIB configurations can improve heat transfer rate and thermal performance by creating different flow profiles. The simulations demonstrate significant enhancements in heat transfer characteristics and fluid flow patterns, with potential applications in the design and optimization of heat exchangers.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Investigation of heated fins geometries on the heat transfer of a channel filled by hybrid nanofluids under the electric field

Mohamed Bechir Ben Hamida et al.

Summary: The study utilized GFEM to model heat transfer in a channel filled with hybrid nanofluids under the electric field, finding that TiO2-Al2O3 hybrid nanofluids exhibited the highest Nusselt number. Increasing nanoparticle concentration and supply voltage can both enhance heat transfer efficiency in the channel.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Thermal performance evaluation for different type of metal oxide water based nanofluids

Tang Tsz Loong et al.

Summary: This study analyzed the thermal performance of various metal oxide water based nanofluids by evaluating their experimental data. A performance factor was introduced to assess the thermal performance of nanofluids, and the enhancement of thermal conductivity and viscosity of different types of nanofluids were compared to rank their thermal performance.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Convective heat transfer and friction factor characteristics of helical strip inserted annuli at turbulent flow

Mehedi Hasan Tusar et al.

Summary: Helical baffles, wire coils, and rectangular ribs are used as inserts to enhance the turbulence and heat transfer performance of annular fluid flow. Inserts improve heat transfer coefficient and friction factor, with varying degrees of effectiveness depending on factors such as Reynolds number, annulus diameter ratio, and pitch ratio.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Numerical study on the heat transfer enhancement and pressure drop inside deep dimpled tubes

Mohammad Hassan Cheraghi et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Energy & Fuels

Performance evaluation of metal-foam baffle exhaust heat exchanger for waste heat recovery

Tianyu Chen et al.

APPLIED ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Stability of nanofluid: A review

Samarshi Chakraborty et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Evaluation of thermal-hydraulic performance of dimpled tube from the perspective of skewness and kurtosis

Wenling Liao et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2020)

添加到收藏夹

Article Energy & Fuels

Novel analysis of second law and irreversibility for a solar power plant using heliostat field and molten salt

Mohammad Hossein Zolfagharnasab et al.

ENERGY SCIENCE & ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Thermal performance evaluation of various nanofluids with non-uniform heating for parabolic trough collectors

Nabeel Abed et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Numerical study on turbulent heat transfer performance of twisted oval tube with different cross sectioned wire coil

Chulin Yu et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Numerical investigation on flow and heat transfer in dimpled tube with teardrop dimples

Shuai Xie et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

Investigation of thermo-fluid behavior of mixed convection heat transfer of different dimples-protrusions wall patterns to heat transfer enhancement

M. Sobhani et al.

HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Numerical investigation on heat transfer performance and flow characteristics in enhanced tube with dimples and protrusions

Shuai Xie et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

A numerical study on heat transfer enhancement and flow structure in enhanced tube with cross ellipsoidal dimples

Shuai Xie et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

添加到收藏夹

Article Thermodynamics

Drying behaviour of lemon balm leaves in an indirect double-pass packed bed forced convection solar dryer system

Shahrbanou Shamekhi-Amiri et al.

CASE STUDIES IN THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement in solar air channel with broken multiple V-type baffle

Raj Kumar et al.

CASE STUDIES IN THERMAL ENGINEERING (2016)

添加到收藏夹

Article Thermodynamics

Thermal-hydraulic performance of Vipertex 1EHT enhanced heat transfer tubes

David J. Kukulka et al.

APPLIED THERMAL ENGINEERING (2013)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.