☆ 4.7 Article

Argon-Assisted Spray-Coating Induced Efficient and Stable MAPbI3 Perovskite Solar Cells

ACS APPLIED ENERGY MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Multidisciplinary Sciences

Metastable Dion-Jacobson 2D structure enables efficient and stable perovskite solar cells

Fei Zhang et al.

Summary: The performance of 3D perovskite solar cells can be improved by treating the surface with 2D layered perovskites that have efficient charge transport. Adjusting the arrangement of organic molecules enhances hole transport and power conversion efficiency. The use of a stable 2D surface layer also improves the performance and stability of 3D perovskite solar cells.

SCIENCE (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Gas-Assisted Spray Coating of Perovskite Solar Cells Incorporating Sprayed Self-Assembled Monolayers

Elena J. Cassella et al.

Summary: Self-assembled monolayers (SAMs) are widely used as hole-selective layers in perovskite solar cells. Ultrasonic spray coating and airbrush coating are effective methods for depositing carbazole-based SAMs. Solvent rinsing protocols overcome the dewetting issue of hybrid perovskite precursor solutions. Air-knife gas-quenching is used to remove volatile solvents, allowing fabrication of high-efficiency p-i-n devices with large-area roll-to-roll manufacturing.

ADVANCED SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Molecularly Tailored SnO2/Perovskite Interface Enabling Efficient and Stable FAPbI3 Solar Cells

Yang Zhang et al.

Summary: This study demonstrates a strategy of molecularly tailoring the FAPbI(3)/SnO2 interface to enhance the stability of perovskite solar cells. By optimizing the configuration of C-O and C=O groups, the device achieved a champion power conversion efficiency of 23.5% and maintained good stability under continuous light illumination.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Review Energy & Fuels

Progress in Spray Coated Perovskite Films for Solar Cell Applications

Li-Hui Chou et al.

Summary: This article introduces the advantages and applications of spray coating technology in producing large-area perovskite solar cells and modules. The impact of one-step and two-step spray coating strategies on film quality and photovoltaic performance is also discussed.

SOLAR RRL (2022)

添加到收藏夹

Article Engineering, Environmental

Restricting lithium-ion migration via Lewis base groups in hole transporting materials for efficient and stable perovskite solar cells

Huayu Bao et al.

Summary: This study proposes a design strategy to restrict Li+ ion migration by introducing different Lewis base groups into hole transporting materials (HTMs). Phen-TPA-based perovskite solar cells (PSCs) achieve high efficiency and stability due to enhanced conjugation and hole mobility. This work provides new design strategies for efficient and stable PSCs.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Surface engineering with oxidized Ti3C2Tx MXene enables efficient and stable p-i-n-structured CsPbI3 perovskite solar cells

Jin Hyuck Heo et al.

Summary: Surface engineering of the CsPbI3 layer with oxidized Ti3C2Tx MXene nanoplates via spray coatings resulted in highly efficient and stable p-i-n-structured CsPbI3 perovskite solar cells. The addition of OMXene provided a physical barrier against moisture and improved charge separation at the perovskite-electron transporting layer interface, leading to the demonstration of efficient CsPbI3/OMXene-based p-i-n devices with good stability.

JOULE (2022)

添加到收藏夹

Article Engineering, Environmental

Mixed solvent atmosphere induces the surface termination state transition of perovskite to achieve matched energy level alignment

Jia Yuan et al.

Summary: The alignment of energy levels between semiconductors and hole-transporting materials is crucial for the efficiency of perovskite solar cells. By controlling the surface termination state of perovskite crystals using a mixed solvent, the energy levels can be adjusted to better match the HTMs, leading to improved charge extraction and reduced recombination rates. This optimization results in increased open circuit voltage and conversion efficiency of the PSCs.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Efficient and Stable Graded CsPbI3-xBrx Perovskite Solar Cells and Submodules by Orthogonal Processable Spray Coating

Jin Hyuck Heo et al.

Summary: In this study, inorganic CsPbI2Br-based perovskite thin films with a well-defined CsPbI3-xBrx composition gradient were fabricated using a scalable and orthogonal processable spray-coating approach. The graded structure broadened the absorption wavelength range, increased carrier lifetime, and improved charge separation and collection efficiency within a device stack. The power conversion efficiency reached 16.81% for a 0.096-cm(2) PSC, and a monolithically integrated perovskite sub-module achieved an efficiency of 13.82% with less than 9% degradation over 1,000 hours of continuous 1-sun light soaking.

JOULE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stable Layered 2D Perovskite Solar Cells with an Efficiency of over 19% via Multifunctional Interfacial Engineering

Yawen Huang et al.

Summary: Scientists successfully optimized the secondary crystallization process of 2D perovskite through multifunctional interface engineering, achieving efficient and stable solar cells with high conversion efficiency, which could retain high efficiency even after long-term storage under ambient conditions.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Chemistry, Physical

Perovskitoid-Templated Formation of a 1D@3D Perovskite Structure toward Highly Efficient and Stable Perovskite Solar Cells

Tengfei Kong et al.

Summary: Using low dimensional perovskite is a promising strategy to improve the stability and efficiency of PSCs, achieving highly efficient and stable devices with good reproducibility. The 1D@3D PSC demonstrated high conversion efficiency and maintained high performance under different conditions in the experiment.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Situ Photosynthesis of an MAPbI3/CoP Hybrid Heterojunction for Efficient Photocatalytic Hydrogen Evolution

Cheng Cai et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Wetting-induced formation of void-free metal halide perovskite films by green ultrasonic spray coating for large-area mesoscopic perovskite solar cells

Sang Soo Kim et al.

RSC ADVANCES (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Understanding of perovskite crystal growth and film formation in scalable deposition processes

Chang Liu et al.

CHEMICAL SOCIETY REVIEWS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Reproducible Large-Area Perovskite Solar Cell Fabrication via Continuous Megasonic Spray Coating of CH3NH3PbI3

Mincheol Park et al.

SMALL (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Constructive molecular configurations for surface-defect passivation of perovskite photovoltaics

Rui Wang et al.

SCIENCE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Efficient Perovskite Solar Cells Prepared by Hot Air Blowing to Ultrasonic Spraying in Ambient Air

Jian Su et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Efficient 2D/3D Hybrid Perovskite Solar Cells via Low-Pressure Vapor-Assisted Solution Process

Ming-Hsien Li et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Stable High-Performance Perovskite Solar Cells via Grain Boundary Passivation

Tianqi Niu et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-Efficiency Spray-Coated Perovskite Solar Cells Utilizing Vacuum-Assisted Solution Processing

James E. Bishop et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Physical

Scalable Deposition of High-Efficiency Perovskite Solar Cells by Spray-Coating

Sona Ulicna et al.

ACS APPLIED ENERGY MATERIALS (2018)

添加到收藏夹

Review Chemistry, Physical

Progress toward Stable Lead Halide Perovskite Solar Cells

Luis K. Ono et al.

JOULE (2018)

添加到收藏夹

Article Energy & Fuels

Fast preparation of uniform large grain size perovskite thin film in air condition via spray deposition method for high efficient planar solar cells

Zhuoneng Bi et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

添加到收藏夹

Review Chemistry, Physical

Towards enabling stable lead halide perovskite solar cells; interplay between structural, environmental, and thermal stability

Tomas Leijtens et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Spray-cast multilayer perovskite solar cells with an active-area of 1.5 cm2

James E. Bishop et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Universal Deposition Protocol for Planar Heterojunction Solar Cells with High Efficiency Based on Hybrid Lead Halide Perovskite Families

Bert Conings et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

Optimizing semiconductor thin films with smooth surfaces and well-interconnected networks for high-performance perovskite solar cells

Wu-Qiang Wu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Chemistry, Physical

Highly efficient CH3NH3PbI3-xClx mixed halide perovskite solar cells prepared by re-dissolution and crystal grain growth via spray coating

Jin Hyuck Heo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Using an Airbrush Pen for Layer-by-Layer Growth of Continuous Perovskite Thin Films for Hybrid Solar Cells

Mohan Ramesh et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Toward Large Scale Roll-to-Roll Production of Fully Printed Perovskite Solar Cells

Kyeongil Hwang et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Physical

Low temperature processing of flexible planar perovskite solar cells with efficiency over 10%

Yasmina Dkhissi et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Enhanced optoelectronic quality of perovskite thin films with hypophosphorous acid for planar heterojunction solar cells

Wei Zhang et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Article Optics

Electro-optics of perovskite solar cells

Qianqian Lin et al.

NATURE PHOTONICS (2015)

添加到收藏夹

Article Chemistry, Physical

Enhanced Environmental Stability of Planar Heterojunction Perovskite Solar Cells Based on Blade-Coating

Jong H. Kim et al.

ADVANCED ENERGY MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Inkjet Printing and Instant Chemical Transformation of a CH3NH3PbI3/Nanocarbon Electrode and Interface for Planar Perovskite Solar Cells

Zhanhua Wei et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition

Alexander T. Barrows et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

Role of the Selective Contacts in the Performance of Lead Halide Perovskite Solar Cells

Emilio J. Juarez-Perez et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability

Anyi Mei et al.

SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

Gas-assisted preparation of lead iodide perovskite films consisting of a monolayer of single crystalline grains for high efficiency planar solar cells

Fuzhi Huang et al.

NANO ENERGY (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient planar heterojunction perovskite solar cells by vapour deposition

Mingzhen Liu et al.

NATURE (2013)

添加到收藏夹

Article Multidisciplinary Sciences

Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH3NH3PbI3

Guichuan Xing et al.

SCIENCE (2013)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.