☆ 4.7 Article

Modeling of the quantitative effect of temperature on key mechanical properties of metal foams

COMPOSITES COMMUNICATIONS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Facile preparation of high strength, lightweight and thermal insulation Polyetherimide/Ti3C2Tx MXenes/Ag nanoparticles composite foams for electromagnetic interference shielding

Bihua Xia et al.

Summary: Novel PEI/Ti3C2Tx MXenes/Ag nanoparticles composite foams with high strength, low density, thermal insulation, and electromagnetic interference shielding properties were developed. The preparation method is fast, reproducible, and scalable. These composite foams may find applications in the field of packaging materials for information storage devices.

COMPOSITES COMMUNICATIONS (2022)

添加到收藏夹

Article Chemistry, Physical

Effect of temperature and strain rate on the compressive deformation response of closed-cell aluminium hybrid foams

Dilip Muchhala et al.

Summary: The hot deformation behavior of different types of foams was investigated at different test temperatures and strain rates. It was found that the energy absorption capacity of the foams decreased with increasing test temperature and increased with increasing strain rate. The hybrid foam with the addition of cenospheres and SWNTs showed the highest plateau stress and energy absorption. The deformation mechanism of the foams varied with temperature and strain rate, as revealed by the activation energy data.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Engineering, Mechanical

A theoretical model for predicting the temperature-dependent fatigue crack propagation threshold of nickel-based superalloys

Yi He et al.

Summary: In this study, fatigue crack propagation was considered from an energy perspective and a temperature-dependent crack fatigue propagation criterion was proposed. A model for temperature-dependent fatigue crack propagation threshold in superalloys was developed, and it showed good agreement with experimental data. The research results have potential applications in aero-engine structural integrity studies.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

添加到收藏夹

Article Engineering, Mechanical

Modeling the temperature dependence of fatigue strength of metallic materials

Yi He et al.

Summary: In this study, a temperature-dependent fatigue failure criterion was proposed and two temperature-dependent fatigue strength models without fitting parameters were developed. The model predictions were in good agreement with experimental data, demonstrating a fast and simple non-destructive method for predicting temperature-dependent fatigue strength.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

添加到收藏夹

Article Materials Science, Composites

Lightweight epoxy foams prepared with arranged hollow-glass-microspheres/epoxy hollow spheres

Yingjie Qiao et al.

Summary: The research focused on the development of lightweight epoxy foams with a macrosized hollow structure using hollow glass microspheres/epoxy resin as filler and epoxy resin as a matrix. The hollow spheres' density and uniaxial compression properties were adjustable by varying the shell thickness. The resulting epoxy foams exhibited high specific flexural and compression strength, providing a new method for the preparation of lightweight structural materials.

COMPOSITES COMMUNICATIONS (2022)

添加到收藏夹

Article Materials Science, Composites

Lightweight epoxy foams prepared with arranged hollow-glass-microspheres/epoxy hollow spheres

Yingjie Qiao et al.

Summary: This study designed a novel lightweight epoxy foam with a macro sized hollow structure using arranged hollow glass microspheres/epoxy resin hollow spheres as filler. It was found that the density and uniaxial compression properties of the prepared hollow spheres could be tuned through adjusting the shell thickness.

COMPOSITES COMMUNICATIONS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Effect of particle size and volume ratio of ceramic hollow spheres on the mechanical properties of bimodal composite metal foams

Alexandra Kemeny et al.

Summary: This study focuses on the production of high performance bimodal composite metal foams by infiltrating EN-AW Al99.5 and EN-AC AlSi12 alloys into two sets of Al2O3 ceramic hollow spheres with different diameters. The mechanical properties of the BCMFs were found to be dependent on the filling rate, rather than the volume ratio of the spheres. The structural investigations showed proper infiltration and higher filling ratio compared to unimodal composite metal foams.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Article Mechanics

Radial crushing response of ex-situ foam-filled tubes at elevated temperatures

Nima Movahedi et al.

Summary: This research investigates the mechanical properties and deformation mechanisms of foam-based composites under radial compressive loadings at different temperatures. The study found that aluminum foams do not show shear failure in the early stages of their deformation at room temperature, and that empty tubes do not progress through successive folding during radial compression. The interaction effect between tubes and foams is observed at all testing temperatures.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Compressive properties of metal matrix syntactic foams in uni- and triaxial compression

Attila Szlancsik et al.

Summary: Metal matrix syntactic foams (MMSFs) with varying matrix properties were produced by pressure infiltration process, and their characteristic properties under different constraints were analyzed. The compressive behavior of MMSFs was found to be influenced by relative density and matrix properties, and their constitutive law was formalized using the Shima-Oyane model for implementation into finite element systems.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Mechanics

Axial crashworthiness performance of foam-based composite structures under extreme temperature conditions

Emanoil Linul et al.

Summary: Metal foams have unique properties that allow them to be used under extreme temperature conditions. Research has shown that the mechanical characteristics of foam-based composites are highest at cryogenic temperatures due to hardening, but decrease at high temperatures due to softening of the matrix material. Additionally, there is a transition from brittle to ductile deformation between extreme temperatures.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Chemistry, Physical

Mechanical properties of A356 and ZA27 metallic syntactic foams at cryogenic temperature

T. Fiedler et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Compressive properties of zinc syntactic foams at elevated temperatures

Emanoil Linul et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Mechanics

On the high-temperature crushing of metal foams

B. S. Aakash et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Temperature Effect on the Compressive Behavior of Closed-Cell Aluminum-Alloy Foams

Nima Movahedi et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

添加到收藏夹

Article Chemistry, Physical

The mechanical properties of expanded perlite-aluminium syntactic foam at elevated temperatures

Mehdi Taherishargh et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced Compressive Property of Al Composite Foams at Elevated Temperatures via Plasma Electrolytic Oxidation

Huamin Liu et al.

METALS (2018)

添加到收藏夹

Article Chemistry, Physical

Poisson's Ratio of Closed-Cell Aluminium Foams

Jaroslav Kovacik et al.

MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Quasi-static compressive behavior of the ex-situ aluminum-alloy foam-filled tubes under elevated temperature conditions

Nima Movahedi et al.

MATERIALS LETTERS (2017)

添加到收藏夹

Article Engineering, Mechanical

Tribological properties of hybrid aluminum matrix syntactic foams

Kornel Majlinger et al.

TRIBOLOGY INTERNATIONAL (2016)

添加到收藏夹

Article Mechanics

Deformation and failure mechanisms of sandwich beams under three-point bending at elevated temperatures

Zhibin Li et al.

COMPOSITE STRUCTURES (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Temperature effects on the mechanical behavior of aluminum foam under dynamic loading

Pengfei Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Engineering, Manufacturing

Compressive characteristics of metal matrix syntactic foams

Imre Norbert Orbulov et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of temperature on the indentation behavior of closed-cell aluminum foam

Zhibin Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Mechanics

Collapse mechanism maps for the hollow pyramidal core of a sandwich panel under transverse shear

S. M. Pingle et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.