4.7 Article

Stability, flexural behavior and compressive strength of ultra-lightweight fiber-reinforced foamed concrete with dry density lower than 100 kg/m3

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

A simple optimized foam generator and a study on peculiar aspects concerning foams and foamed concrete

Devid Falliano et al.

Summary: This paper investigates the factors influencing the properties of foams and foamed concrete, focusing on foam generation, stability, the impact of foaming agents on foam density and drainage percentage, and the compressive strength of lightweight and ultra-lightweight foamed concretes. The results suggest that foams generated with protein foaming agents are more suitable for producing foamed concrete, with a longer lifespan compared to synthetic foaming agents. Additionally, an increase in protein foaming agent concentration significantly affects the compressive strength of ultra-lightweight foamed concretes.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Influence of fine inclusions on the morphology and mechanical performance of lightweight foam concrete

Yu Song et al.

Summary: This study investigates the impact of sand particles on the mechanical properties of lightweight foam concrete. Experimental results show that the degradation of foam structure is the main cause of the loss in mechanical performance, but high-volume particle inclusion can be achieved with proper implementation.

CEMENT & CONCRETE COMPOSITES (2021)

Article Construction & Building Technology

The stability and durability of silt-based foamed concrete: A new type of road engineering material

Jianqing Wu et al.

Summary: This study analyzed the strength change law of silt-based foamed concrete through various tests, showing that its stability and durability are considered great and meet the needs of road engineering construction.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Properties of foamed concrete with Ca(OH)2 as foam stabilizer

Xiong Yuanliang et al.

Summary: In this study, Ca(OH)(2) was used as a foam stabilizer to improve the stability of fresh foam and enhance the properties of foamed concrete. The inclusion of Ca(OH)(2) can hinder the disproportionation and coalescence of bubbles by reacting with alumina on the bubble surface, thus improving foam stability and achieving a finer, more homogeneous pore structure for better performance of foamed concrete.

CEMENT & CONCRETE COMPOSITES (2021)

Article Construction & Building Technology

Collapse of fresh foam concrete: Mechanisms and influencing parameters

K. Dhasindrakrishna et al.

Summary: This study evaluated the influence of rheology and density on the collapse behavior of mechanically foamed fresh aerated concrete, identifying the critical yield stress for stability and its relationship with foam content. It was found that the experimentally determined critical yield stress to prevent foam collapse aligns well with the drainage-based stability criteria.

CEMENT & CONCRETE COMPOSITES (2021)

Article Construction & Building Technology

Use of green calcium sulphoaluminate cement to prepare foamed concrete for road embankment: A feasibility study

Zhi Ge et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Investigation of phase composition and microstructure of foamed cement paste with different supplementary cementing materials

Sang-Yeop Chung et al.

CEMENT & CONCRETE COMPOSITES (2020)

Review Chemistry, Physical

Fibre-Reinforced Foamed Concretes: A Review

Mugahed Amran et al.

MATERIALS (2020)

Article Construction & Building Technology

Effect of yield stress development on the foam-stability of aerated geopolymer concrete

K. Dhasindrakrishna et al.

CEMENT AND CONCRETE RESEARCH (2020)

Article Construction & Building Technology

Compressive and flexural strength of fiber-reinforced foamed concrete: Effect of fiber content, curing conditions and dry density

Devid Falliano et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Review Construction & Building Technology

Cellular concrete review: New trends for application in construction

Lina Chica et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Materials Science, Multidisciplinary

Mechanical Characterization of Lightweight Foamed Concrete

Marcin Kozlowski et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)

Article Construction & Building Technology

High-volume, ultra-low-density fly ash foamed concrete

M. Roderick Jones et al.

MAGAZINE OF CONCRETE RESEARCH (2017)

Article Construction & Building Technology

Investigation of the properties of high-porosity cement foams based on ternary Portland cement-metakaolin-silica fume blends

Jun Jiang et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Stability and instability of foamed concrete

M. Roderick Jones et al.

MAGAZINE OF CONCRETE RESEARCH (2016)

Article Materials Science, Multidisciplinary

Study on the preparation and properties of high-porosity foamed concretes based on ordinary Portland cement

Jun Jiang et al.

MATERIALS & DESIGN (2016)

Article Construction & Building Technology

Proportioning and characterization of Portland cement-based ultra-lightweight foam concretes

Zhaoming Huang et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Preparation and characterization of high porosity cement-based foam material

Guochen Sang et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Tests on high-performance aerated concrete with a lower density

Keun-Hyeok Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

On void structure and strength of foamed concrete made without/with additives

Ameer A. Hilal et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Preparation and characterization of super low density foamed concrete from Portland cement and admixtures

Pan Zhihua et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Article Materials Science, Multidisciplinary

Experimental Study of Ultralight (<300 kg/m3) Foamed Concrete

Xianjun Tan et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2014)

Article Construction & Building Technology

Cellular concrete properties and the effect of synthetic and protein foaming agents

D. K. Panesar

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

High porosity (>90%) cementitious foams

F. K. Akthar et al.

CEMENT AND CONCRETE RESEARCH (2010)

Article Construction & Building Technology

A classification of studies on properties of foam concrete

K. Ramamurthy et al.

CEMENT & CONCRETE COMPOSITES (2009)

Article Construction & Building Technology

Air-void characterisation of foam concrete

E. K. Kunhanandan Nambiar et al.

CEMENT AND CONCRETE RESEARCH (2007)

Article Construction & Building Technology

Influence of filler type on the properties of foam concrete

E. K. Kunhanandan Nambiar et al.

CEMENT & CONCRETE COMPOSITES (2006)