☆ 4.7 Article

Design optimization of a latent heat storage using sodium acetate trihydrate

JOURNAL OF ENERGY STORAGE (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Thermal characteristics of a long-term heat storage unit with sodium acetate trihydrate

Gang Wang et al.

Summary: Latent heat energy storage system is a promising technique for domestic thermal energy storage systems, which uses sensible heat for short-term heat storage and latent heat for long-term heat storage, with relatively high heat exchange capacity rate.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Design and operation of hybrid renewable energy systems: current status and future perspectives

Lanyu Li et al.

Summary: Hybrid renewable energy systems, combining different energy systems, offer a promising way to maximize renewable energy. This paper reviews the emerging applications and recent developments in the design and operation of such systems, while discussing the remaining challenges and future perspectives in the field.

CURRENT OPINION IN CHEMICAL ENGINEERING (2021)

添加到收藏夹

Article Energy & Fuels

Performance analysis of a novel hybrid solar photovoltaic - pumped-hydro and compressed-air storage system in different climatic zones

Li Dong et al.

Summary: It has been proven that the future of human society's energy demands is linked to renewable sources like solar energy. Challenges in solar energy system operation can be overcome by using innovative energy storage systems like PHCA, coupled with renewable power generation. Engineers must find the right balance between storage system and solar system based on energy needs, storage volume, storing water method, operating hours and geological requirements.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Aliphatic fatty diamide as renewable phase change materials for thermal energy storage

Kosheela D. Poopalam et al.

Summary: The study established relationships between molecular structure and thermal functionality of aliphatic fatty diamides through the investigation of twelve synthesized symmetrical aliphatic diamides. It clarified the role structural factors play in phase change characteristics and provided insights into designing superior aliphatic fatty amide molecules for TES applications.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

A novel compensating fins configuration for improving the thermal performance of latent heat thermal energy storage unit

Junting Wu et al.

Summary: The study found that compensating fins configurations effectively improved the thermal performance and flexibility of the LHTES unit.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Influence of porosity and permeability of flow distributor on thermal stratification in single media storage tank

Varun Joshi et al.

Summary: In a single media single tank system, a wall permeability between 10^(-9) m(2) and 10^(-8) m(2) leads to optimal thermal stratification. Additionally, the minimum thermocline thickness achieved is about 13% of the entire tank height, significantly lower than reported values.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Improvement of the thermal performance of a solar triple concentric-tube thermal energy storage unit using cascaded phase change materials

Radouane Elbahjaoui

Summary: This study numerically investigated the thermal performance of a solar domestic hot water system incorporating triple concentric-tube latent heat storage modules filled with cascaded phase change materials. The model based on the enthalpy method was verified and validated by comparing predictions with previously published experimental and numerical results. The thermal performance of the cascaded thermal energy storage tank was evaluated under specific weather conditions and compared with that of a single-PCM storage tank during the charging process.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Numerical evaluation of the latent heat thermal energy storage performance enhancement by installing longitudinal fins

Mateo Kirincic et al.

Summary: The research numerically investigates the effect of installation of longitudinal fins on the performance enhancement of shell-and-tube latent heat thermal energy storage, comparing it with plain tube configuration. Results show that fins significantly improve the overall heat transfer, and the reduction in phase change material mass and obstruction of natural convection in the liquid phase have negligible effect on the overall latent storage thermal performance during both charging and discharging.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Improved thermocline initialization through optimized inlet design for single-tank thermal energy storage systems

Julius Weiss et al.

Summary: Single tank thermal energy storage systems based on the thermocline concept have been extensively researched as a cost-effective alternative to molten salt double tank storage systems. However, the discrepancy between theoretical models and actual flow distribution has been identified as a reason for the inability to achieve high cyclic efficiencies predicted in simulations. The optimal placement and geometric characteristics of fluid distributors in the tank play a crucial role in minimizing the initial thermocline thickness and optimizing thermal stratification.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Numerical investigation of a shell-and-tube latent heat thermal energy storage system for urban heating network

Bilal Lamrani et al.

Summary: This study numerically investigates the thermal performance of a shell-and-tube PCM storage system for DHN, showing that the system can supply hot water at 70 degrees C or higher for a period of time under specific conditions and regulate thermal power by adjusting water flow rate. The number of tubes, water return temperature, and PCM melting temperature are critical design and operation parameters affecting the storage system performance.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Enhanced thermal performance of finned latent heat thermal energy storage system: fin parameters optimization

Zakaria Elmaazouzi et al.

Summary: This study simulated, modeled and optimized a proposed system for heat transfer enhancement by using the finite element method with annular fins in shell-and-tube storage units. Through comparing multiple fin geometries, the recommended fin parameters were determined to achieve the highest thermal performance.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Experimental investigation on the effects of phase change material and different ventilation modes on the thermal storage, space heating and energy consumption characteristics of ventilated mortar blocks

Jiwei Guo et al.

Summary: The study found that integrating micro encapsulated PCM in radiant heating floors significantly increases thermal storage capacity, and ventilation can enhance heat release flexibility. Experimental results showed that a mass ratio of 8.7% PCM in mortar blocks increased heating time by 78.5% and thermal storage capacity by 80.3% compared to pure mortar blocks. Ventilation further increased energy consumption by more than 22.7%, and adjusting ventilation mode allowed for flexible space heating and cooling rates, essential for the operation of the new heating system.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Review Energy & Fuels

Review on sodium acetate trihydrate in flexible thermal energy storages: Properties, challenges and applications

Gang Wang et al.

Summary: Sodium acetate trihydrate (SAT) as a heat storage material offers high energy storage density and large supercooling degree, making it suitable for future energy systems with fluctuating renewable energies. SAT heat storages provide flexibility and reliability in both short-term and long-term heat storage, demonstrating clear advantages over traditional water based heat storage systems.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Review Energy & Fuels

State of art review on the solidification and melting characteristics of phase change material in triplex-tube thermal energy storage

Kin Yuen Leong et al.

Summary: Phase change materials (PCMs) are used for storing thermal energy due to their high latent heat and low thermal conductivity. This review discusses factors affecting solidification and melting of PCM in a triplex-tube heat exchanger, including flow rate, temperature, fins, position, heating and cooling, etc. It is found that using fins and nanoparticles in the triplex tube can enhance solidification and melting of PCM.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Thermodynamics

Demonstration of a solar combi-system utilizing stable supercooling of sodium acetate trihydrate for heat storage

Gerald Englmair et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Economics

The heterogeneous preferences for solar energy policies among US households

Yan Heng et al.

ENERGY POLICY (2020)

添加到收藏夹

Article Energy & Fuels

Charging performance optimization of a latent heat storage unit with fractal tree-like fins

Cheng Yu et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Energy & Fuels

Analysis of a phase change material-based unit and of an aluminum foam/phase change material composite-based unit for cold thermal energy storage by numerical simulation

Martina Caliano et al.

APPLIED ENERGY (2019)

添加到收藏夹

Article Energy & Fuels

Design and functionality of a segmented heat-storage prototype utilizing stable supercooling of sodium acetate trihydrate in a solar heating system

Gerald Englmair et al.

APPLIED ENERGY (2018)

添加到收藏夹

Article Thermodynamics

CFD modelling development and experimental validation of a phase change material (PCM) heat exchanger with spiral-wired tubes

W. Youssef et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Energy & Fuels

Sodium Acetate Trihydrate-Crystallization Inhibitor System for Seasonal Latent Heat Storage

Lirong Yuan et al.

JOURNAL OF ENERGY ENGINEERING (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effect of percussion vibration on solidification of supercooled salt hydrate PCM in thermal storage unit

Guobing Zhou et al.

RENEWABLE ENERGY (2018)

添加到收藏夹

Article Energy & Fuels

Sodium Acetate Trihydrate-Crystallization Inhibitor System for Seasonal Latent Heat Storage

Lirong Yuan et al.

JOURNAL OF ENERGY ENGINEERING (2018)

添加到收藏夹

Article Energy & Fuels

Experimental investigations on stable supercooling performance of sodium acetate trihydrate PCM for thermal storage

Guobing Zhou et al.

SOLAR ENERGY (2017)

添加到收藏夹

Article Economics

Governing by targets: reductio ad unum and evolution of the two-degree climate target

Piero Morseletto et al.

INTERNATIONAL ENVIRONMENTAL AGREEMENTS-POLITICS LAW AND ECONOMICS (2017)

添加到收藏夹

Article Energy & Fuels

Experimental investigations on prototype heat storage units utilizing stable supercooling of sodium acetate trihydrate mixtures

Mark Dannemand et al.

APPLIED ENERGY (2016)

添加到收藏夹

Article Ecology

Consistent and unbiased carbon dioxide emission multipliers: Performance of Danish emission reductions via external trade

Jose M. Rueda-Cantuche et al.

ECOLOGICAL ECONOMICS (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.