☆ 4.7 Article

Coupled parameters evaluation of three different finned structures for concentrated solar thermal energy storage

JOURNAL OF ENERGY STORAGE (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Performance evaluation of novel tapered shell and tube cascaded latent heat thermal energy storage

B. V. Rudra Murthy et al.

Summary: The geometric design of the storage system is crucial for enhancing heat transfer rate in latent heat thermal energy storage technology. The study compares the heat transfer performance of tapered and cylindrical cascaded latent heat storage models, showing that the tapered unit has superior performance with higher average power but slightly lower discharge power compared to the cylindrical unit.

SOLAR ENERGY (2021)

添加到收藏夹

Article Thermodynamics

Experimental investigation on thermal behavior of paraffin in a vertical shell and spiral fin tube latent heat thermal energy storage unit

Bohui Lu et al.

Summary: The study investigated the thermal performance of a LHTES unit using PCM and HTF, finding that natural convection of melted PCM significantly impacts phase-change rate, while increasing inlet HTF temperature and flow rate during charging can improve heat transfer and shorten total charging time.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Preparation and thermophysical property analysis of nanocomposite phase change materials for energy storage

Jin Wang et al.

Summary: This study utilized various nanoparticles to enhance the heat conduction of phase change materials, with the addition of a dispersant for stability. The phase change latent heat, viscosity, and thermal conductivity of the nanocomposite PCMs were measured. The results demonstrated that the use of nanocomposite PCMs can improve thermal conductivity and reduce temperature fluctuations.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

添加到收藏夹

Article Energy & Fuels

Preparation and thermal characterization of n-octadecane/pentafluorostyrene nanocapsules for phase-change energy storage

Kai Zhang et al.

Summary: A novel class of NEPCM was developed using suspension polymerization method, with core n-octadecane capsulated in poly(2,3,4,5,6-pentafluorostyrene) shell. The NEPCM exhibited excellent thermal performance and high encapsulation efficiency, making it suitable for practical applications in thermal energy storage.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Improvement of the thermal performance of a solar triple concentric-tube thermal energy storage unit using cascaded phase change materials

Radouane Elbahjaoui

Summary: This study numerically investigated the thermal performance of a solar domestic hot water system incorporating triple concentric-tube latent heat storage modules filled with cascaded phase change materials. The model based on the enthalpy method was verified and validated by comparing predictions with previously published experimental and numerical results. The thermal performance of the cascaded thermal energy storage tank was evaluated under specific weather conditions and compared with that of a single-PCM storage tank during the charging process.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Numerical evaluation of the latent heat thermal energy storage performance enhancement by installing longitudinal fins

Mateo Kirincic et al.

Summary: The research numerically investigates the effect of installation of longitudinal fins on the performance enhancement of shell-and-tube latent heat thermal energy storage, comparing it with plain tube configuration. Results show that fins significantly improve the overall heat transfer, and the reduction in phase change material mass and obstruction of natural convection in the liquid phase have negligible effect on the overall latent storage thermal performance during both charging and discharging.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Enhanced thermal performance of finned latent heat thermal energy storage system: fin parameters optimization

Zakaria Elmaazouzi et al.

Summary: This study simulated, modeled and optimized a proposed system for heat transfer enhancement by using the finite element method with annular fins in shell-and-tube storage units. Through comparing multiple fin geometries, the recommended fin parameters were determined to achieve the highest thermal performance.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Phase change material heat transfer enhancement in latent heat thermal energy storage unit with single fin: Comprehensive effect of position and length

Junting Wu et al.

Summary: This study explored the comprehensive effect of the position and length of a single fin in a latent heat thermal energy storage unit on the melting and solidification of phase-change materials through transient numerical simulations. It was found that increasing the fin length and lowering the fin position simultaneously significantly reduced the total melting time, but resulted in non-uniform temperature distribution during the solidification process. An optimal fin position corresponding to different fin lengths was suggested. Additionally, the disparity between heat storage/release and phase transition was quantitatively discussed.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Experimental and numerical study on the effect of multiple phase change materials thermal energy storage system

Idris Al Siyabi et al.

Summary: Thermal energy storage using Phase Change Materials (PCMs) is currently of great interest, and the use of multiple PCM technique has been shown to enhance thermal performance in a shell-and-tube heat exchanger. Both experimental and numerical studies demonstrate that the multiple PCM arrangement results in a higher average temperature of PCM compared to other arrangements.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Heat transfer enhancement in latent heat thermal energy storage using copper foams with varying porosity

Jie Lei et al.

Summary: The study shows that incorporating copper foams into PCM significantly enhances the heat transfer performance of LHTES, reducing the full melting time by 73.7% and increasing the average heat flux density from 96.38W to 330.16W. Dividing the copper foam into upper and lower parts and increasing porosity separately along the positive x and y directions is the optimal method, leading to reductions in full melting time and increases in average heat flux density.

SOLAR ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Experimental analysis of a latent thermal energy storage system enhanced with metal foam

Joan Tarragona et al.

Summary: The energy consumption of refrigeration systems worldwide has increased by 50% in the last 20 years. Active refrigeration systems are commonly used in industry to maintain cold chains, but they have drawbacks such as susceptibility to power outages and vibrations. Passive cold chain transport using latent thermal energy storage systems is proposed as a potential solution to overcome these issues.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Improving the energy discharging performance of a latent heat storage (LHS) unit using fractal-tree-shaped fins

Chengbin Zhang et al.

APPLIED ENERGY (2020)

添加到收藏夹

Article Thermodynamics

Performance optimization of a finned shell-and-tube ice storage unit

Yongping Huang et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Thermal performance optimization and evaluation of a radial finned shell-and-tube latent heat thermal energy storage unit

Liang Pu et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Energy & Fuels

The Effects of Fin Parameters on the Solidification of PCMs in a Fin-Enhanced Thermal Energy Storage System

Mohammad Javad Zarei et al.

ENERGIES (2020)

添加到收藏夹

Article Energy & Fuels

Performance evaluation of latent heat TES system-case study: Dimensions improvements of annular fins exchanger

Z. Elmaazouzi et al.

ENERGY REPORTS (2020)

添加到收藏夹

Article Thermodynamics

Experimental evaluation of thermal performance of two different finned latent heat storage systems

Ayad K. Hassan et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

添加到收藏夹

Article Energy & Fuels

Graphite foam infiltration with mixed chloride salts as PCM for high-temperature latent heat storage applications

Hao Lan et al.

SOLAR ENERGY (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Thermal energy storage with phase change materials: Application on coaxial heat exchanger with fins

Zakaria Elmaazouzi et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Thermodynamics

Investigation of charging and discharging characteristics of a horizontal conical shell and tube latent thermal energy storage device

Gurpreet Singh Sodhi et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Thermodynamics

Investigation of the effect of inclination angle on the melting enhancement of phase change material in finned latent heat thermal storage units

Ramin Karami et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Energy & Fuels

Numerical study of integrated latent heat thermal energy storage devices using nanoparticle-enhanced phase change materials

B. Akhmetov et al.

SOLAR ENERGY (2019)

添加到收藏夹

Article Thermodynamics

Natural and by-product materials for thermocline-based thermal energy storage system at CSP plant: Structural and thermophysical properties

Yaroslav Grosu et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Review Thermodynamics

An overview of thermal energy storage systems

Guruprasad Alva et al.

ENERGY (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Thermodynamics behavior of phase change latent heat materials in micro-/nanoconfined spaces for thermal storage and applications

Shudong Zhang et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review of phase change material and performance enhancement method for latent heat storage system

Y. B. Tao et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Article Energy & Fuels

A novel heat transfer enhancement technique for performance improvements in encapsulated latent heat storage system

Hakeem Niyas et al.

SOLAR ENERGY (2018)

添加到收藏夹

Review Energy & Fuels

Review of latent heat thermal energy storage for improved material stability and effective load management

K. S. Reddy et al.

JOURNAL OF ENERGY STORAGE (2018)

添加到收藏夹

Article Thermodynamics

A comparative study on the performances of different shell-and-tube type latent heat thermal energy storage units including the effects of natural convection

Guang-Shun Han et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

Thermal energy storage materials and systems for solar energy applications

Guruprasad Alva et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

添加到收藏夹

Proceedings Paper Green & Sustainable Science & Technology

Pilot-scale CO2 sequestration test site in the Sulcis basin (SW Sardinia): Preliminary site characterization and research program

Alberto Plaisant et al.

13TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-13 (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Comparative study of the thermal performance of four different shell-and-tube heat exchangers used as latent heat thermal energy storage systems

Jaume Gasia et al.

RENEWABLE ENERGY (2017)

添加到收藏夹

Article Energy & Fuels

Thermal performance of a shell-and-tube latent heat thermal energy storage unit: Role of annular fins

Xiaohu Yang et al.

APPLIED ENERGY (2017)

添加到收藏夹

Review Energy & Fuels

Thermal energy storage for low and medium temperature applications using phase change materials - A review

Jose Pereira da Cunha et al.

APPLIED ENERGY (2016)

添加到收藏夹

Article Energy & Fuels

Effect of installation angle of fins on melting characteristics of annular unit for latent heat thermal energy storage

Yanping Yuan et al.

SOLAR ENERGY (2016)

添加到收藏夹

Article Construction & Building Technology

Experimental and numerical evaluation of longitudinally finned latent heat thermal storage systems

M. J. Hosseini et al.

ENERGY AND BUILDINGS (2015)

添加到收藏夹

Article Energy & Fuels

Analysis of a latent thermocline storage system with encapsulated phase change materials for concentrating solar power

K. Nithyanandam et al.

APPLIED ENERGY (2014)

添加到收藏夹

Article Thermodynamics

Comparison between the single-PCM and multi-PCM thermal energy storage design

Taha K. Aldoss et al.

ENERGY CONVERSION AND MANAGEMENT (2014)

添加到收藏夹

Review Energy & Fuels

Achieving better energy-efficient air conditioning - A review of technologies and strategies

K. J. Chua et al.

APPLIED ENERGY (2013)

添加到收藏夹

Article Energy & Fuels

Experimental and numerical study of annular PCM storage in the presence of natural convection

Martin Longeon et al.

APPLIED ENERGY (2013)

添加到收藏夹

Article Thermodynamics

Numerical study of the heat charging and discharging characteristics of a shell-and-tube phase change heat storage unit

Wei-Wei Wang et al.

APPLIED THERMAL ENGINEERING (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Thermal properties of aluminum-graphite composites by powder metallurgy

J. K. Chen et al.

COMPOSITES PART B-ENGINEERING (2013)

添加到收藏夹

Article Thermodynamics

Enhance heat transfer for PCM melting in triplex tube with internal-external fins

Sohif Mat et al.

ENERGY CONVERSION AND MANAGEMENT (2013)

添加到收藏夹

Review Green & Sustainable Science & Technology

High temperature latent heat thermal energy storage: Phase change materials, design considerations and performance enhancement techniques

Bruno Cardenas et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)

添加到收藏夹

Article Energy & Fuels

Heat transfer enhancement of high temperature thermal energy storage using metal foams and expanded graphite

C. Y. Zhao et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)

添加到收藏夹

Article Thermodynamics

BUOYANCY-DRIVEN FLOWS-BEYOND THE BOUSSINESQ APPROXIMATION

Ayodeji Demuren et al.

NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS (2009)

添加到收藏夹

Review Green & Sustainable Science & Technology

Performance enhancement in latent heat thermal storage system: A review

S. Jegadheeswaran et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)

添加到收藏夹

Review Green & Sustainable Science & Technology

Review on thermal energy storage with phase change materials and applications

Atul Sharma et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)

添加到收藏夹

Article Energy & Fuels

A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins

Francis Agyenim et al.

SOLAR ENERGY (2009)

添加到收藏夹

Review Green & Sustainable Science & Technology

Heat transfer characteristics of thermal energy storage system using PCM capsules: A review

A. Felix Regin et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2008)

添加到收藏夹

Article Thermodynamics

Experimental investigations on the characteristics of melting processes of stearic acid in an annulus and its thermal conductivity enhancement by fins

ZL Liu et al.

ENERGY CONVERSION AND MANAGEMENT (2005)

添加到收藏夹

Article Energy & Fuels

Advances in solar thermal electricity technology

D Mills

SOLAR ENERGY (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.