Biomechanical evaluation of a short-rod technique for lumbar fixation surgery

Objective: The purpose of this study was to analyze the stability and instrument-related complications associated with fixation of the lumbar spine using the Short-Rod (SR) technique. Methods: Using finite element analysis, this study assessed the stability of a bilateral lumbar fixation system when inserting the pedicle screws at angles of 10 degrees, 15 degrees, and 20 degrees to the endplate in the sagittal plane. Using the most stable construct with a screw angle, the model was then assessed with different rod lengths of 25, 30, 35, and 45 mm. The optimal screw inclination angle and rod length were incorporated into the SR model and compared against traditional parallel screw insertion (pedicle screws in parallel to the endplate, PPS) in terms of the stability and risk of instrument-related complications. The following parameters were evaluated using the validated L4-L5 lumbar finite element model: axial stiffness, range of motion (ROM), stress on the endplate and facet joint, von-Mises stress on the contact surface between the screw and rod (CSSR), and screw displacement. Results: The results showed that the SR model with a 15 degrees screw inclination angle and 35 mm rod length was superior in terms of construct stability and risk of complications. Compared to the PPS model, the SR model had lower stiffness, lower ROM, less screw displacement, and lower stress on the facet cartilage, the CSSR, and screws. However, the SR model also suffered more stress on the endplate in flexion and lateral bending. Conclusion: The SR technique with a 15 degrees screw inclination and 35 mm rod length offers good lumbar stability with a low risk of instrument-related complications.

Automated summary

This study analyzed the stability and instrument-related complications of lumbar spine fixation using the Short-Rod technique. Through finite element analysis, the optimal screw inclination angle and rod length were determined to be 15 degrees and 35 mm, respectively. The results showed that the Short-Rod technique with this configuration offered good lumbar stability with a low risk of complications.