相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。High-cycle and very-high-cycle fatigue lifetime prediction of additively manufactured AlSi10Mg via crystal plasticity finite element method
Jiamei Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
In situ X-ray imaging of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy
Weijian Qian et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Effects of build orientation and heat treatments on the tensile and fracture toughness properties of additively manufactured AlSi10Mg
Luana C. Araujo et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)
Effect of building orientation and heat treatment on the anisotropic tensile properties of AlSi10Mg fabricated by selective laser melting
C. G. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Machine-learning assisted additive manufacturing of a TiCN reinforced AlSi10Mg composite with tailorable mechanical properties
Peidong He et al.
MATERIALS LETTERS (2022)
Microstructure and loading direction dependent hardening and damage behavior of laser powder bed fusion AlSi10Mg
Lubin Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Design and Characterization of Al-Mg-Si-Zr Alloys with Improved Laser Powder Bed Fusion Processability
F. Belelli et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2022)
Mechanism of keyhole pore formation in metal additive manufacturing
Lu Wang et al.
NPJ COMPUTATIONAL MATERIALS (2022)
Insight on precipitate evolution during additive manufacturing of stainless steels via in-situ heating-cooling experiments in a transmission electron microscope
Meriem Ben Haj Slama et al.
MATERIALIA (2022)
Defect-induced cracking and fine granular characteristics in very-high-cycle fatigue of laser powder bed fusion AlSi10Mg alloy
Jianghua Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Hot isostatic pressing of laser powder bed fusion AlSi10Mg: parameter identification and mechanical properties
Juan Guillermo Santos Macias et al.
JOURNAL OF MATERIALS SCIENCE (2022)
Achieving superior mechanical properties of selective laser melted AlSi10Mg via direct aging treatment
H. Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Microstructural characteristics and mechanical properties of additively manufactured Cu-10Sn alloys by laser powder bed fusion
Abhishek Mehta et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
A method of step-by-step packing and its application in generating 3D microstructures of polycrystalline and composite materials
V. Romanova et al.
ENGINEERING WITH COMPUTERS (2021)
Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
Niloofar Sanaei et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Metallurgy, mechanistic models and machine learning in metal printing
T. DebRoy et al.
NATURE REVIEWS MATERIALS (2021)
Fracture and fatigue in additively manufactured metals
Thorsten Hermann Becker et al.
ACTA MATERIALIA (2021)
Crystal plasticity simulation of the macroscale and microscale stress-strain relations of additively manufactured AlSi10Mg alloy
X. X. Zhang et al.
COMPUTATIONAL MATERIALS SCIENCE (2021)
A machine learning framework to predict local strain distribution and the evolution of plastic anisotropy & fracture in additively manufactured alloys
Waqas Muhammad et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Microstructure evolution and mechanical properties at high temperature of selective laser melted AlSi10Mg
Y. Cao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Microstructure and mechanical properties of a TiB 2-modified Al-Cu alloy processed by laser powder-bed fusion
P. Mair et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Enhancing as-built microstructural integrity and tensile properties in laser powder bed fusion of AlSi10Mg alloy using a comprehensive parameter optimization procedure
Adib Salandari-Rabori et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Optimisation of process parameters for an additively manufactured AlSi10Mg alloy: Limitations of the energy density-based approach on porosity and mechanical properties estimation
Maverick Giovagnoli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Heterogeneous Aspects of Additive Manufactured Metallic Parts: A Review
G. M. Karthik et al.
METALS AND MATERIALS INTERNATIONAL (2021)
More than 25 years of extreme value statistics for defects: Fundamentals, historical developments, recent applications
S. Beretta
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Effect of construction angles on microstructure and mechanical properties of AlSi10Mg alloy fabricated by selective laser melting
Xiaofeng Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Nanoscale periodic gradients generated by laser powder bed fusion of an AlSi10Mg alloy
Williams Lefebvre et al.
MATERIALS & DESIGN (2021)
Intensive processing optimization for achieving strong and ductile Al-Mn-Mg-Sc-Zr alloy produced by selective laser melting
D. Bayoumy et al.
MATERIALS & DESIGN (2021)
Microstructural aspects of additive manufacturing of Al-Li alloys with high Li content
Dongmei Liu et al.
MATERIALS & DESIGN (2021)
Quantifying internal strains, stresses, and dislocation density in additively manufactured AlSi10Mg during loading-unloading-reloading deformation
X. X. Zhang et al.
MATERIALS & DESIGN (2021)
Micromechanical simulations of additively manufactured aluminum alloys
V Romanova et al.
COMPUTERS & STRUCTURES (2021)
Crack initiation behavior and fatigue performance up to very-high-cycle regime of AlSi10Mg fabricated by selective laser melting with two powder sizes
Z. M. Jian et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Multiscale constitutive modeling of additively manufactured Al?Si?Mg alloys based on measured phase stresses and dislocation density
X. X. Zhang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Unveiling damage sites and fracture path in laser powder bed fusion AlSi10Mg: Comparison between horizontal and vertical loading directions
Lv Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Keyhole mode induced simultaneous improvement in strength and ductility of Sc modified Al?Mn alloy manufactured by selective laser melting
Jinglin Lu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Making selective-laser-melted high-strength Al-Mg-Sc-Zr alloy tough via ultrafine and heterogeneous microstructure
Zihong Wang et al.
SCRIPTA MATERIALIA (2021)
Ef fi cient optimization methodology for laser powder bed fusion parameters to manufacture dense and mechanically sound parts validated on AlSi12 alloy
Julie Gheysen et al.
MATERIALS & DESIGN (2021)
Heat treatment of aluminium alloys produced by laser powder bed fusion: A review
J. Fiocchi et al.
MATERIALS & DESIGN (2021)
Evolution of internal pores within AlSi10Mg manufactured by laser powder bed fusion under tension: As-built and heat treated conditions
James C. Hastie et al.
MATERIALS & DESIGN (2021)
Characterizing the microstructural effect of build direction during solidification of laser-powder b e d fusion of Al-Si alloys in the dilute limit: A phase-field study
Hossein Azizi et al.
ACTA MATERIALIA (2021)
Composition-dependent solidification cracking of aluminum-silicon alloys during laser powder bed fusion
Holden Hyer et al.
ACTA MATERIALIA (2021)
Cool, Dry, Nano-scale DIC Patterning of Delicate, Heterogeneous, Non-planar Specimens by Micro-mist Nebulization
S. Shafqat et al.
EXPERIMENTAL MECHANICS (2021)
Metal additive manufacturing in aerospace: A review
Byron Blakey-Milner et al.
MATERIALS & DESIGN (2021)
Fatigue crack nucleation and growth in laser powder bed fusion AlSi10Mg under as built and post-treated conditions
Juan Guillermo Santos Macias et al.
MATERIALS & DESIGN (2021)
The effect of defect population on the anisotropic fatigue resistance of AlSi10Mg alloy fabricated by laser powder bed fusion
Zhengkai Wu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Evolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloy
X. X. Zhang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Evolution of Heterogeneous Microstructure and its Effects on Tensile Properties of Selective Laser Melted AlSi10Mg Alloy
Yongchao Ou et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Influence of heat treatments on AlSi10Mg specimens manufactured with different laser powder bed fusion machines
A. Kempf et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Fatigue performance and crack propagation behavior of selective laser melted AlSi10Mg in 0?, 15?, 45? and 90? building directions
Zhongwei Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The mechanical behavior and microstructure of additively manufactured AlSi10Mg for different material states and loading conditions
Michael Schuch et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Unravelling the multi-scale structure-property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg
P. Van Cauwenbergh et al.
SCIENTIFIC REPORTS (2021)
Fracture resistance of AlSi10Mg fabricate d by laser powder b e d fusion
Moses J. Paul et al.
ACTA MATERIALIA (2021)
Microstructural origin of the anisotropic flow stress of laser powder bed fused AlSi10Mg
P. Li et al.
ACTA MATERIALIA (2021)
Selective laser melted AlSi10Mg alloy under melting mode transition: Microstructure evolution, nanomechanical behaviors and tensile properties
Hong Wu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Effect of direct aging on the microstructure and tensile properties of AlSi10Mg alloy manufactured by selective laser melting process
Tae-Hyun Park et al.
MATERIALS CHARACTERIZATION (2021)
Influence of heat treatment on the high-cycle fatigue properties and fatigue damage mechanism of selective laser melted AlSi10Mg alloy
Min-Seok Baek et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Microstructure evolution, fatigue crack growth, and ultrasonic fatigue in As-fabricated laser powder bed and conventionally cast Al-10Si-0.4Mg: A mechanistic understanding and integrated flaw-sensitive fatigue design methods
Timothy D. Piette et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
MPB characteristics and Si morphologies on mechanical properties and fracture behavior of SLM AlSi10Mg
U. Patakham et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Influences of platform heating and post-processing stress relief treatment on the mechanical properties and microstructure of selective-laser-melted AlSi10Mg alloys
Ben Amir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Microstructure, mechanical performance, and corrosion behavior of additively manufactured aluminum alloy 5083 with 0.7 and 1.0 wt% Zr addition
Le Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The Columnar-to-Equiaxed Transition in Melt Pools During Laser Powder Bed Fusion of M2 Steel
Yining He et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2021)
Material-structure-performance integrated laser-metal additive manufacturing
Dongdong Gu et al.
SCIENCE (2021)
Comparative study of performance comparison of AlSi10Mg alloy prepared by selective laser melting and casting
Qian Yan et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Effects of hot isostatic pressing and internal porosity on the performance of selective laser melted AlSi10Mg alloys
Tomotake Hirata et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Rapid Solidification and Non-equilibrium Phase Constitution in Laser Powder Bed Fusion (LPBF) of AlSi10Mg Alloy: Analysis of Nano-precipitates, Eutectic Phases, and Hardness Evolution
Hong Qin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Ad Hoc Heat Treatments for Selective Laser Melted Alsi10mg Alloy Aimed at Stress-Relieving and Enhancing Mechanical Performances
J. Fiocchi et al.
JOM (2020)
Classifying shape of internal pores within AlSi10Mg alloy manufactured by laser powder bed fusion using 3D X-ray micro computed tomography: Influence of processing parameters and heat treatment
James C. Hastie et al.
MATERIALS CHARACTERIZATION (2020)
Strengthening and hardening mechanisms of additively manufactured stainless steels: The role of cell sizes
Zan Li et al.
SCRIPTA MATERIALIA (2020)
Recent Advances on High-Entropy Alloys for 3D Printing
Changjun Han et al.
ADVANCED MATERIALS (2020)
Stress relaxation and the cellular structure-dependence of plastic deformation in additively manufactured AlSi10Mg alloys
Zan Li et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Controlling interdependent meso-nanosecond dynamics and defect generation inmetal 3D printing
Saad A. Khairallah et al.
SCIENCE (2020)
Metal 3D printing as a disruptive technology for superalloys
Chinnapat Panwisawas et al.
NATURE COMMUNICATIONS (2020)
Effect of build orientation on the quasi-static and dynamic response of SLM AlSi10Mg
Tobias Maconachie et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Process-Dependent Composition, Microstructure, and Printability of Al-Zn-Mg and Al-Zn-Mg-Sc-Zr Alloys Manufactured by Laser Powder Bed Fusion
Le Zhou et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms
Ruidi Li et al.
ACTA MATERIALIA (2020)
Analytical modeling of fatigue crack propagation based on cyclic hardening and a characteristic damage length
A. T. Kermanidis et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
A comparative study of the effects of thermal treatments on AlSi10Mg produced by laser powder bed fusion
Elisa Padovano et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Laser powder bed fusion of AlSi10Mg: Influence of energy intensities on spatter and porosity evolution, microstructure and mechanical properties
Tao Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Fatigue strength assessment of as built AlSi10Mg manufactured by SLM with different build orientations
S. Beretta et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Very-high-cycle fatigue behavior of AlSi10Mg manufactured by selective laser melting: Effect of build orientation and mean stress
Guian Qian et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Microstructure, metallurgical defects and hardness of Al-Cu-Mg-Li-Zr alloy additively manufactured by selective laser melting
Rong Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
High cycle fatigue performance of AlSi10mg alloy produced by selective laser melting
Z. W. Xu et al.
MECHANICS OF MATERIALS (2020)
Mechanical Properties of SLM-Printed Aluminium Alloys: A Review
Panneer Ponnusamy et al.
MATERIALS (2020)
Machine-learning assisted laser powder bed fusion process optimization for AlSi10Mg: New microstructure description indices and fracture mechanisms
Qian Liu et al.
ACTA MATERIALIA (2020)
Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg
Juan Guillermo Santos Macias et al.
ACTA MATERIALIA (2020)
Heterogeneous microstructure and voids dependence of tensile deformation in a selective laser melted AlSi10Mg alloy
D. D. Ben et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Fracture toughness of L-PBF fabricated aluminium-silicon: a quantitative study on the role of crack growth direction with respect to layering
L. Hitzler et al.
PROGRESS IN ADDITIVE MANUFACTURING (2020)
Understanding the Laser Powder Bed Fusion of AlSi10Mg Alloy
Holden Hyer et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2020)
A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends
Jinliang Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy
Longchao Zhuo et al.
MATERIALS LETTERS (2019)
A comparative study on single-laser and multi-laser selective laser melting AlSi10Mg: defects, microstructure and mechanical properties
Changchun Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
Ross Cunningham et al.
SCIENCE (2019)
Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting
Y. K. Xiao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructure of selective laser melted AlSi10Mg alloy
Xihe Liu et al.
MATERIALS & DESIGN (2019)
Very high-cycle fatigue properties and microstructural damage mechanisms of selective laser melted AlSi10Mg alloy
Mustafa Awd et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting
J. Delahaye et al.
ACTA MATERIALIA (2019)
Fatigue crack growth behavior of a selective laser melted AlSi10Mg
Maria Teresa Di Giovanni et al.
ENGINEERING FRACTURE MECHANICS (2019)
Influence of the annealing and defects on the VHCF behavior of an SLM AlSi10Mg alloy
Andrea Tridello et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions
Lv Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Ductilisation and fatigue life enhancement of selective laser melted AlSi10Mg by friction stir processing
Juan Guillermo Santos Macias et al.
SCRIPTA MATERIALIA (2019)
Fostering crack deviation via local internal stresses in Al/NiTi composites and its correlation with fracture toughness
Lv Zhao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy
Z. H. Xiong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Contribution of Mg2Si precipitates to the strength of direct metal laser sintered AlSi10Mg
Amir Hadadzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy
Luca Girelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Solute clustering and supersaturated solid solution of AlSi10Mg alloy fabricated by selective laser melting
Takashi Maeshima et al.
HELIYON (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging
Qilin Guo et al.
ACTA MATERIALIA (2018)
Fluid and particle dynamics in laser powder bed fusion
P. Bidare et al.
ACTA MATERIALIA (2018)
Fatigue life and mechanistic modeling of interior micro-defect induced cracking in high cycle and very high cycle regimes
Ming-Liang Zhu et al.
ACTA MATERIALIA (2018)
Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength
S. Romano et al.
ENGINEERING FRACTURE MECHANICS (2018)
Changes in the microstructure and mechanical properties of additively manufactured AlSi10Mg alloy after exposure to elevated temperatures
Michaela Fousova et al.
MATERIALS CHARACTERIZATION (2018)
Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment
Le Zhou et al.
MATERIALS CHARACTERIZATION (2018)
Porosity formation mechanisms and fatigue response in Al-Si-Mg alloys made by selective laser melting
Kun V. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process
I Rosenthal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
LCF behaviour and a comprehensive life prediction model for AlSi10Mg obtained by SLM
S. Romano et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Solidification pattern, microstructure and texture development in Laser Powder Bed Fusion (LPBF) of Al10SiMg alloy
Hong Qin et al.
MATERIALS CHARACTERIZATION (2018)
Enhancement in mechanical properties of selectively laser-melted AlSi10Mg aluminum alloys by T6-like heat treatment
L. F. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy
N. O. Larrosa et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Effects of Platform Pre-Heating and Thermal-Treatment Strategies on Properties of AlSi10Mg Alloy Processed by Selective Laser Melting
Riccardo Casati et al.
METALS (2018)
Microstructural Characterization of the Anisotropy and Cyclic Deformation Behavior of Selective Laser Melted AlSi10Mg Structures
Mustafa Awd et al.
METALS (2018)
Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
Ming Tang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes
S. Beretta et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Low temperature annealing dedicated to AlSi10Mg selective laser melting products
J. Fiocchi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Formation of metastable cellular microstructures in selective laser melted alloys
K. G. Prashanth et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Evaluation of the stress-strain relationship of constituent phases in AlSi10Mg alloy produced by selective laser melting using crystal plasticity FEM
Dong-Kyu Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Direction and location dependency of selective laser melted AlSi10Mg specimens
Leonhard Hitzler et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Additive Manufacturing of Lightweight, Optimized, Metallic Components Suitable for Space Flight
Melissa E. Orme et al.
JOURNAL OF SPACECRAFT AND ROCKETS (2017)
Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments
Naoki Takata et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
Naor Elad Uzan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Strength and strain hardening of a selective laser melted AlSi10Mg alloy
B. Chen et al.
SCRIPTA MATERIALIA (2017)
Qualification of AM parts: Extreme value statistics applied to tomographic measurements
S. Romano et al.
MATERIALS & DESIGN (2017)
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
Umberto Scipioni Bertoli et al.
MATERIALS & DESIGN (2017)
How magnesium accommodates local deformation incompatibility: A high-resolution digital image correlation study
Alberto Orozco-Caballero et al.
ACTA MATERIALIA (2017)
Microstructure and strength of selectively laser melted AlSi10Mg
J. Wu et al.
ACTA MATERIALIA (2016)
Characterization and micromechanical modelling of microstructural heterogeneity effects on ductile fracture of 6xxx aluminium alloys
F. Hannard et al.
ACTA MATERIALIA (2016)
Failure of metals II: Fatigue
Andre Pineau et al.
ACTA MATERIALIA (2016)
Failure of metals I: Brittle and ductile fracture
A. Pineau et al.
ACTA MATERIALIA (2016)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Saad A. Khairallah et al.
ACTA MATERIALIA (2016)
The formation mechanism of characteristic region at crack initiation for very-high-cycle fatigue of high-strength steels
Youshi Hong et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Stiffness and fracture analysis of photovoltaic grade silicon plates
Lv Zhao et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Rapid Solidification: Selective Laser Melting of AlSi10Mg
Ming Tang et al.
JOM (2016)
Stress partitioning behavior of an AlSi10Mg alloy produced by selective laser melting during tensile deformation using in situ neutron diffraction
Dong-Kyu Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Changing the alloy composition of A17075 for better processability by selective laser melting
Maria L. Montero Sistiaga et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Quantification and characterisation of porosity in selectively laser melted Al-Si10-Mg using X-ray computed tomography
I. Maskery et al.
MATERIALS CHARACTERIZATION (2016)
Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism
Wei Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment
Nesma T. Aboulkhair et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality
Nesma T. Aboulkhair et al.
MATERIALS & DESIGN (2016)
Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development
U. Tradowsky et al.
MATERIALS & DESIGN (2016)
A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility
X. P. Li et al.
ACTA MATERIALIA (2015)
Selective laser melting of aluminum die-cast alloy-Correlations between process parameters, solidification conditions, and resulting mechanical properties
D. Buchbinder et al.
JOURNAL OF LASER APPLICATIONS (2015)
Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
Christian Weingarten et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
Noriko Read et al.
MATERIALS & DESIGN (2015)
Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation
K. Kempen et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting
Damien Buchbinder et al.
JOURNAL OF LASER APPLICATIONS (2014)
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
Lore Thijs et al.
ACTA MATERIALIA (2013)
Plastic Strain Mapping with Sub-micron Resolution Using Digital Image Correlation
F. Di Gioacchino et al.
EXPERIMENTAL MECHANICS (2013)
Electron Tomography in the (S)TEM: From Nanoscale Morphological Analysis to 3D Atomic Imaging
Zineb Saghi et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 42 (2012)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
Erhard Brandl et al.
MATERIALS & DESIGN (2012)
Experimental and theoretical investigation of environmental media on very-high-cycle fatigue behavior for a structural steel
Guian Qian et al.
ACTA MATERIALIA (2011)
Very high cycle fatigue - Is there a fatigue limit?
B. Pyttel et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
The conflicts between strength and toughness
Robert O. Ritchie
NATURE MATERIALS (2011)
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
F. Roters et al.
ACTA MATERIALIA (2010)
Relationship between Fracture Toughness and Tensile Properties of A357 Cast Aluminum Alloy
N. D. Alexopoulos et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Effects of eutectic silicon particles on tensile properties and fracture toughness of A356 aluminum alloys fabricated by low-pressure-casting, casting-forging, and squeeze-casting processes
Kyuhong Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Development of patterns for digital image correlation measurements at reduced length scales
W. A. Scrivens et al.
EXPERIMENTAL MECHANICS (2007)
Mechanism-based strain gradient crystal plasticity - I. Theory
CS Han et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2005)
Mechanism-based strain gradient crystal plasticity - II. Analysis
CS Han et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2005)
Damage initiation in model metallic materials:: X-ray tomography and modelling
L Babout et al.
ACTA MATERIALIA (2004)
A conventional theory of mechanism-based strain gradient plasticity
Y Huang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2004)
Micromechanics-based model for trends in toughness of ductile metals
T Pardoen et al.
ACTA MATERIALIA (2003)
Generalized shear-lag model for load transfer in SiC/Al metal-matrix composites
HJ Ryu et al.
JOURNAL OF MATERIALS RESEARCH (2003)
Softening of elastic moduli of amorphous semiconductors
C Mathioudakis et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2000)