☆ 4.8 Article

Numerical studies of melt pool and gas bubble dynamics in laser powder bed fusion process

ADDITIVE MANUFACTURING (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Particle scale modelling of melt pool dynamics and pore formation in selective laser melting additive manufacturing

Erlei Li et al.

Summary: This study employs a validated mathematical model to assess the influence of material properties on the selective laser melting process. The results indicate that the solidification rate and mushy zone constant have a significant impact on the formation of pores and surface defects.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Chemical

Modelling of keyhole dynamics and melt pool flow in laser powder bed fusion process

Erlei Li et al.

Summary: This study addresses and quantifies the dynamics of keyholes in the laser powder bed fusion (LPBF) process, specifically focusing on the driving forces of surface tension, Marangoni force, and recoil pressure. Through modeling the melt pool dynamics, the complete life cycle of keyholes, including formation, drilling, fluctuation, and disappearance, is captured. The study reveals that pores in the keyholes originate from powder bed voids, ejected keyhole protrusions, and gas bubbles eroded by the liquid at the end of the track. The presence of an anticlockwise vortex at the rear of the melt pool and the clockwise path of molten liquid ahead of the melt pool are observed. The fluctuation in the depth of keyholes is attributed to the variation in the powder layer thickness, which breaks the force equilibrium on the keyhole rim. The compressed rear keyhole is predominantly controlled by surface tension, while the expanded front rim is influenced by recoil pressure.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanistic models for additive manufacturing of metallic components

H. L. Wei et al.

Summary: This article discusses the application of additive manufacturing (AM) in the manufacturing of metallic components, focusing on the factors that affect the microstructure, properties, and defects of components and the corresponding model predictions. The critical review of the application of transport phenomena models in AM studies is provided, and opportunities for future research are identified.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review

Niloofar Sanaei et al.

Summary: Additive manufacturing is emerging as an alternative method for producing unique and complex parts, with fatigue performance being a key consideration. Defects such as Lack of Fusion, porosities, and un-melted particles can affect fatigue performance, but can be minimized through process optimization and post-processing. Analytical techniques can reduce the need for costly fullscale testing for assessing reliability in fatigue performance.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Article Thermodynamics

A fundamental investigation of thermo-capillarity in laser powder bed fusion of metals and alloys

Mohamad Bayat et al.

Summary: This study utilizes a multi-physics numerical model to investigate the effects of thermo-capillarity on the melt pool morphology and thermal fluid conditions during the Laser Powder Bed Fusion process. The results demonstrate that higher Marangoni numbers lead to decreased temperature gradients and more uniform temperature fields in the melt pool. Additionally, a novel methodology is introduced for calculating the melt pool's average Nusselt number, which can be used to simplify heat conduction simulations with effective liquid conductivity.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Engineering, Chemical

A three-phase model for simulation of heat transfer and melt pool behaviour in laser powder bed fusion process

E. L. Li et al.

Summary: The study utilized a three-phase model to investigate the heat transfer and melt pool behavior in LPBF, revealing that the dimension and shape of the melt pool are influenced by laser power and scanning speed. In some cases, metal powders at the bottom layers may not be fully melted, and thicker powder bed layers may result in porosities.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A novel smoothed particle hydrodynamics formulation for thermo-capillary phase change problems with focus on metal additive manufacturing melt pool modeling

Christoph Meier et al.

Summary: This paper introduces a weakly compressible smoothed particle hydrodynamics formulation for modeling the melt pool dynamics in metal additive manufacturing, with a focus on selective laser melting. The formulation considers various interface forces and proposes a novel interface stabilization scheme for stable and smooth liquid-gas interface. Multiple examples are provided to verify the accuracy and robustness of the model and method building blocks.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Emerging metallic systems for additive manufacturing: In-situ alloying and multi-metal processing in laser powder bed fusion

S. L. Sing et al.

Summary: This paper discusses the challenges and emerging research directions in the field of materials manufacturing using laser powder bed fusion technology. It provides a comprehensive overview of the current state of research and emphasizes future research trends and potential topics.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Article Engineering, Chemical

Adhesion effects on spreading of metal powders in selective laser melting

L. Wang et al.

POWDER TECHNOLOGY (2020)

添加到收藏夹

Article Thermodynamics

Multi-physics modelling of molten pool development and track formation in multi-track, multi-layer and multi-material selective laser meelting

Heng Gu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Controlling interdependent meso-nanosecond dynamics and defect generation inmetal 3D printing

Saad A. Khairallah et al.

SCIENCE (2020)

添加到收藏夹

Article Engineering, Manufacturing

Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding

S. Mohammad H. Hojjatzadeh et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Critical instability at moving keyhole tip generates porosity in laser melting

Cang Zhao et al.

SCIENCE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging

Ross Cunningham et al.

SCIENCE (2019)

添加到收藏夹

Article Thermodynamics

A novel method for the molten pool and porosity formation modelling in selective laser melting

Min Zheng et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

The effect of powder oxidation on defect formation in laser additive manufacturing

Chu Lun Alex Leung et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Review on Modeling and Simulation of Continuous Casting

Brian G. Thomas

STEEL RESEARCH INTERNATIONAL (2018)

添加到收藏夹

Article Multidisciplinary Sciences

In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing

Chu Lun Alex Leung et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Engineering, Chemical

Discrete element simulation and experimental study of powder spreading process in additive manufacturing

S. Haeri et al.

POWDER TECHNOLOGY (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing

Sonny Ly et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Review Engineering, Chemical

Principles of viscous sintering in amorphous powders: A critical review

Mohammadmandi Kamyabi et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2017)

添加到收藏夹

Review Engineering, Mechanical

Defect Formation Mechanisms in Selective Laser Melting: A Review

Bi Zhang et al.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2017)

添加到收藏夹

Article Chemistry, Physical

Alloy design for aircraft engines

Tresa M. Pollock

NATURE MATERIALS (2016)

添加到收藏夹

Review Multidisciplinary Sciences

Multiprocess 3D printing for increasing component functionality

Eric MacDonald et al.

SCIENCE (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the role of melt flow into the surface structure and porosity development during selective laser melting

Chunlei Qiu et al.

ACTA MATERIALIA (2015)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Recent Advances in the Fluid Dynamics of Ladle Metallurgy

Gordon Irons et al.

ISIJ INTERNATIONAL (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting

H. P. Tang et al.

JOM (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties

E. O. Olakanmi et al.

PROGRESS IN MATERIALS SCIENCE (2015)

添加到收藏夹

Article Engineering, Industrial

Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing

Wayne E. King et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Manufacturing

Customised titanium implant fabricated in additive manufacturing for craniomaxillofacial surgery This paper discusses the design and fabrication of a metallic implant for the reconstruction of a large cranial defect

Andre Luiz Jardini et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2014)

添加到收藏夹

Article Engineering, Biomedical

Bone ingrowth potential of electron beam and selective laser melting produced trabecular-like implant surfaces with and without a biomimetic coating

J. E. Biemond et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2013)

添加到收藏夹

Article Automation & Control Systems

Balling behavior of stainless steel and nickel powder during selective laser melting process

Ruidi Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Surface tension of nickel, copper, iron and their binary alloys

J Brillo et al.

JOURNAL OF MATERIALS SCIENCE (2005)

添加到收藏夹

Article Engineering, Industrial

Selective laser melting of iron-based powder

JP Kruth et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.