4.6 Article

Hydrodynamic Predictions of the Ultralight Particle Dispersions in a Bubbling Fluidized Bed

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Solids back-mixing in the transport zone of circulating fluidized bed boilers

Tove Djerf et al.

Summary: This study investigates the back-mixing of solids in the transport zone of large-scale circulating fluidized bed (CFB) boilers and identifies the core-to-wall layer mass transfer as the governing mechanism. Pe-numbers may not straightforwardly describe lateral solid dispersion, and a Pe-number < 26 is needed to match the measured back-mixing rates in large-scale CFB boilers. A mathematical expression for the core-to-wall layer mass transfer coefficient based on a Sherwood number correlation shows better agreement with large-scale measurements than expressions in the literature.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Chemical

Computational fluid dynamic simulations of regular bubble patterns in pulsed fluidized beds using a two-fluid model

Zhizhong Ding et al.

Summary: The study demonstrates that while the simulated bubble patterns show regularity, the actual arrangement of bubbles is unstable. Additionally, the prediction of bubble patterns is affected by the mathematical limitations of frictional closure models.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2022)

Article Thermodynamics

Numerical analysis on particle dispersions of swirling gas-particle flow using a four-way coupled large eddy simulation

Yang Liu et al.

Summary: This study proposes a novel particle SGS kinetic turbulent energy-granular temperature model to investigate particle hydrodynamics affected by particle diameters. The results show significant differences in vortex evolution and coherent structures between micro and larger size particles. Additionally, SGS particle collision leads to additional particle energy dissipation.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Article Engineering, Chemical

A novel particle subgrid scale modeling of large eddy simulation for swirling particle-laden turbulent flow

Yang Liu et al.

Summary: This paper investigates the effects of subgrid scale (SGS) gas flow on particle dynamics in particle-laden swirling turbulent flow. A novel particle SGS kinetic turbulent energy-granular temperature (SGS-kp-Theta p) model is proposed to model this effect on particle motions and dispersions. The results show good agreement with experimental data and simulations, indicating the accuracy of the proposed model.

POWDER TECHNOLOGY (2022)

Article Engineering, Chemical

Solids backmixing and entrainment in the splash zone of large-scale fluidized bed boilers

Tove Djerf et al.

Summary: This study focuses on the fluid dynamics of solids in the splash zone of fluidized bed furnaces, investigating solids back-mixing and entrainment phenomena, and proposing a simple model for estimation. The results show that the entrainment flux of solids from the bottom region is minimally affected by the bottom wall configuration, and an empirical expression for solids entrainment is provided for a wide range of operational conditions and unit sizes.

POWDER TECHNOLOGY (2022)

Article Engineering, Environmental

Hydrodynamic modeling of non-swirling and swirling gas-particle two-phase turbulent flow using large eddy simulation

Yang Liu et al.

Summary: The flow structures of non-swirling and swirling particle-laden turbulence are modeled using large eddy simulation. The interaction mechanism between gas and particles, particles and gas, and particle-particle collisions are revealed through a new proposed subgrid scale particle kinetic energy-granular temperature model. Numerical predictions of particle vortices, coherent structures, and dynamics are in good agreement with experimental measurements. The study highlights the differences in particle transport characteristics and turbulent fluctuations between non-swirling and swirling flows.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Article Engineering, Chemical

A clouded bubble-based drag model for the simulations of bubbling fluidized beds

Kai Zhang et al.

Summary: In this study, a clouded bubble-based drag model was developed for the simulation of bubbling fluidized beds. The model takes into account the non-uniform drag force distribution around the bubble cloud, and it was found to provide more accurate results compared to other drag models.

CHEMICAL ENGINEERING SCIENCE (2022)

Article Thermodynamics

Investigation on ultralight particle dispersions in dense two-phase flow using a kinetic friction stress model

Yang Liu et al.

Summary: The study numerically investigates the dispersion characteristics of graphite particles in a dense gas-solid turbulent flow in a downer reactor. Results show that predictions align with experimental data, with lower particle sphericities contributing to enhancements in particle velocity, concentration, shear stress, collision frequency, and granular temperature. Negative amplitudes of shear stresses at fully developed regions are significantly higher than those at second acceleration regions.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Energy & Fuels

Modeling the motion of fuel particles in a fluidized bed

A. Kohler et al.

Summary: A semiempirical model for fuel particle mixing in fluidized bed has been proposed and validated against experimental data, categorizing the bed into three mixing zones. The model accurately predicts lateral dispersion coefficients of different fuel types under various conditions, showing satisfactory agreement with experimental measurements.
Article Engineering, Chemical

Solids flow patterns in large-scale circulating fluidised bed boilers: Experimental evaluation under fluid-dynamically down-scaled conditions

Tove Djerf et al.

Summary: This study aims to explore the mechanisms of solid flow pattern in large-scale Circulating Fluidised Bed (CFB) boilers. Through experiments, it was found that the presence or absence of a dense bed at the bottom of the furnace significantly affects the entrainment of solids, while the back-flow of solids at the exit region is negligible at low gas velocities but becomes significant with higher gas velocities. The estimation of external solids flux based on top flux in the furnace may not always be valid.

CHEMICAL ENGINEERING SCIENCE (2021)

Article Chemistry, Multidisciplinary

Hydrodynamic Modeling of Turbulence Modulation by Particles in a Swirling Gas-Particle Two-Phase Flow

Yang Liu et al.

Summary: This study numerically simulates the turbulence modulations by particles in a swirling gas-particle two-phase flow in an axisymmetric chamber. The results show that the characteristics of particles have a significant impact on the turbulence structure, with heavy particles causing more noticeable modulation disturbances and vortex evolution compared to ultralight particles. Further research is needed to explore the effects of particle properties on turbulent flow dynamics.

ACS OMEGA (2021)

Article Energy & Fuels

Hydrodynamic simulations of non-spherical particle dispersions in downer reactor with second-order moment turbulence model

Yang Liu et al.

Summary: A second-order moment kinetic frictional stress model was proposed to simulate the hydrodynamics of non-spherical particle flow in a downer reactor, showing good agreement with experimental data. The study found that an increase in irregular shape degree of particles leads to various enhancements in particle properties, and strongly heterogeneous characteristics were observed in certain regions. Higher heterogeneous indexes corresponded to a transition from homogeneous to heterogeneous flow.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Article Engineering, Chemical

Investigations of Gas-Particle Two-Phase Flow in Swirling Combustor by the Particle Stokes Numbers

Yang Liu et al.

Summary: The investigation of gas turbulence modulations and particle dispersions in swirling gas-particle two-phase flow in the combustor shows strong anisotropic characteristics and a close relationship with flow structure. The axial gas velocity and particle velocity exhibit sensitivity to particle diameter parameters and the Stokes number.

PROCESSES (2021)

Article Chemistry, Multidisciplinary

Hydrodynamics of Irregular-Shaped Graphite Particles in Coaxial Two-Phase Jet Flow

Yang Liu et al.

Summary: The study investigates the hydrodynamics of irregular-shaped graphite particles in swirling flows in a coaxial chamber using an improved model and algorithm. Irregular-shaped particles are found to be more sensitive to gas followability, while spherical particles are easier to be affected by inlet effects. The interlock force between nonspherical particles has a greater effect on particle flow compared to spherical particles.

ACS OMEGA (2021)

Article Energy & Fuels

Development of modeling and simulation of bubble-liquid hydrodynamics in bubble column

Yang Liu et al.

ENERGY SCIENCE & ENGINEERING (2020)

Article Thermodynamics

Numerical investigation on mixture particle dispersion characteristics in swirling particle-laden combustion chamber

Yang Liu et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

Review Mechanics

Direct Numerical Simulation of Turbulent Flows Laden with Droplets or Bubbles

Said Elghobashi

ANNUAL REVIEW OF FLUID MECHANICS, VOL 51 (2019)

Article Thermodynamics

Numerical study on bubble-liquid two-phase turbulent hydrodynamics in extremely narrow shape bioreactor

Yang Liu et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2019)

Article Chemistry, Applied

Bottom-bed fluid dynamics - Influence on solids entrainment

Tove Djerf et al.

FUEL PROCESSING TECHNOLOGY (2018)

Article Engineering, Chemical

Two-fluid LES and RANS modeling of sudden-expansion gas-particle flows

L. X. Zhou et al.

POWDER TECHNOLOGY (2018)

Article Engineering, Chemical

Two-fluid turbulence modeling of swirling gas-particle flows - A review

Lixing Zhou

POWDER TECHNOLOGY (2017)

Article Engineering, Chemical

INFLUENCE OF THE MODEL SCALE ON HYDRODYNAMIC SCALING IN CFB BOILERS

P. Mirek

BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING (2016)

Article Engineering, Chemical

A comparative study on optical techniques for the estimation of granular flow velocities

Thomas Hagemeier et al.

CHEMICAL ENGINEERING SCIENCE (2015)

Article Engineering, Chemical

Improved Magnetic Particle Tracking Technique in Dense Gas Fluidized Beds

Kay A. Buist et al.

AICHE JOURNAL (2014)

Article Engineering, Chemical

Spout fluidized beds: Recent advances in experimental and numerical studies

Vinayak S. Sutkar et al.

CHEMICAL ENGINEERING SCIENCE (2013)

Article Engineering, Mechanical

Higher order multi-frame particle tracking velocimetry

Christian Cierpka et al.

EXPERIMENTS IN FLUIDS (2013)

Article Engineering, Environmental

Computational fluid dynamics of circulating fluidized bed downer: Study of modeling parameters and system hydrodynamic characteristics

Benjapon Chalermsinsuwan et al.

CHEMICAL ENGINEERING JOURNAL (2012)

Article Engineering, Mechanical

On the uncertainty of digital PIV and PTV near walls

Christian J. Kaehler et al.

EXPERIMENTS IN FLUIDS (2012)

Article Engineering, Chemical

SCALING OF FLOW PHENOMENA IN CIRCULATING FLUIDIZED BED BOILERS

Pawel Mirek

CHEMICAL AND PROCESS ENGINEERING-INZYNIERIA CHEMICZNA I PROCESOWA (2011)

Article Engineering, Mechanical

Velocity-field measurements in a dam-break flow using a PTV Vorono⟨ imaging technique

R. Aleixo et al.

EXPERIMENTS IN FLUIDS (2011)

Article Engineering, Chemical

Experimental study on solids concentration distribution in a two-dimensional circulating fluidized bed

Jing Xu et al.

CHEMICAL ENGINEERING SCIENCE (2010)

Article Engineering, Chemical

A second-order moment method of dense gas-solid flow for bubbling fluidization

Sun Dan et al.

CHEMICAL ENGINEERING SCIENCE (2009)

Article Engineering, Chemical

Filtered two-fluid models for fluidized gas-particle suspensions

Yesim Igci et al.

AICHE JOURNAL (2008)

Article Engineering, Chemical

A CFD-DEM study of the cluster behavior in riser and downer reactors

M. H. Zhang et al.

POWDER TECHNOLOGY (2008)

Article Engineering, Chemical

Practical validation of the two-fluid model applied to dense gas-solid flows in fluidized beds

Havard Lindborg et al.

CHEMICAL ENGINEERING SCIENCE (2007)

Article Engineering, Chemical

Hydrodynamic modeling of particle rotation for segregation in bubbling gas-fluidized beds

J Sun et al.

CHEMICAL ENGINEERING SCIENCE (2006)

Article Engineering, Mechanical

A USM-Θ two-phase turbulence model for simulating dense gas-particle flows

Y Yong et al.

ACTA MECHANICA SINICA (2005)

Article Engineering, Environmental

Characterizing particle clustering behavior by PDPA measurement for dilute gas-solid flow

XH Liu et al.

CHEMICAL ENGINEERING JOURNAL (2005)

Article Engineering, Chemical

Hydrodynamics of binary fluidization in a riser: CFD simulation using two granular temperatures

HL Lu et al.

CHEMICAL ENGINEERING SCIENCE (2003)

Article Mechanics

Lagrangian approach for simulating the gas-particle flow structure in a circulating fluidized bed riser

HS Zhou et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2002)

Article Engineering, Chemical

Reflections on turbulent fluidization and dense suspension upflow

JR Grace

POWDER TECHNOLOGY (2000)