相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Designing the microstructural constituents of an additively manufactured near β Ti alloy for an enhanced mechanical and corrosion response
Avinash Hariharan et al.
MATERIALS & DESIGN (2022)
Metastable pitting corrosion behavior of laser powder bed fusion produced Ti-6Al-4V in Hank's solution
Yu-Wei Cui et al.
CORROSION SCIENCE (2022)
Beta Titanium Alloys Processed By Laser Powder Bed Fusion: A Review
J. C. Colombo-Pulgarin et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Remelt processing and microstructure of selective laser melted Ti25Ta
E. G. Brodie et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Additive manufacturing of Ti6Al4V alloy: A review
Shunyu Liu et al.
MATERIALS & DESIGN (2019)
Microstructure and tensile properties of a Ti-28Ta alloy studied by transmission electron microscopy and digital image correlation
Gang Chen et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Environmental assessment of additive manufacturing in the automotive industry
Daniel Bockin et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Selective laser melting of Ti-35Nb composite from elemental powder mixture: Microstructure, mechanical behavior and corrosion behavior
J. C. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Micro-and meso-structures and their influence on mechanical properties of selectively laser melted Ti-6Al-4V
Punit Kumar et al.
ACTA MATERIALIA (2018)
Metallurgical properties and biomimetic HA deposition performance of Ti-Nb PIM alloys
Eren Yilmaz et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
A review of powder additive manufacturing processes for metallic biomaterials
W. S. W. Harun et al.
POWDER TECHNOLOGY (2018)
Mechanical Properties of a Newly Additive Manufactured Implant Material Based on Ti-42Nb
Christian Schulze et al.
MATERIALS (2018)
A Review of Metastable Beta Titanium Alloys
R. Prakash Kolli et al.
METALS (2018)
Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
Peng Qin et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Improved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
Peng Qin et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)
Effect of microstructure characteristic on mechanical properties and corrosion behavior of new high strength Ti-1300 beta titanium alloy
Jinwen Lu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effect of Annealing Treatments on the Microstructure, Mechanical Properties and Corrosion Behavior of Direct Metal Laser Sintered Ti-6Al-4V
Yangzi Xu et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Microstructure and mechanical properties investigation of CP titanium processed by selective laser melting (SLM)
Bartlomiej Wysocki et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
On The Corrosion and Metastable Pitting Characteristics of 316L Stainless Steel Produced by Selective Laser Melting
G. Sander et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Influence of different grained powders and pellets made of Niobium and Ti-42Nb on human cell viability
Jana Markhoff et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Corrosion and surface modification on biocompatible metals: A review
R. I. M. Asri et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting
Qian Wang et al.
MATERIALS & DESIGN (2017)
Defect Formation Mechanisms in Selective Laser Melting: A Review
Bi Zhang et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2017)
Role of surface roughness on corrosion and fretting corrosion behaviour of commercially pure titanium in Ringer's solution for bio-implant application
Bose Sivakumar et al.
APPLIED SURFACE SCIENCE (2017)
Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review
Lai-Chang Zhang et al.
ADVANCED ENGINEERING MATERIALS (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Effect of zirconium content on the microstructure and corrosion behavior of Ti-6Al-4V-xZr alloys
Chaoqun Xia et al.
CORROSION SCIENCE (2016)
Mechanical and electrochemical characterisation of new Ti-Mo-Nb-Zr alloys for biomedical applications
Paul S. Nnamchi et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Biocompatibility of new Ti-Nb-Ta base alloys
Abdelrahman H. Hussein et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Microstructure, Mechanical Properties, and Electrochemical Behavior of Ti-Nb-Fe Alloys Applied as Biomaterials
Eder Socrates Najar Lopes et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Corrosion and passivation of annealed Ti-20Zr-6.5Al-4V alloy
Yahui Yang et al.
CORROSION SCIENCE (2015)
Influence of casting porosity on the corrosion behaviour of Mg0.1Si
Fuyong Cao et al.
CORROSION SCIENCE (2015)
Comparative study of structure formation and mechanical behavior of age-hardened Ti-Nb-Zr and Ti-Nb-Ta shape memory alloys
K. Inaekyan et al.
MATERIALS CHARACTERIZATION (2015)
Electrochemical behavior of near-beta titanium biomedical alloys in phosphate buffer saline solution
A. Dalmau et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Effect of surface mechanical attrition treatment on corrosion resistance of commercial pure titanium
Tianlin Fu et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Selective Laser Melting of Ti-45Nb Alloy
Holger Schwab et al.
METALS (2015)
Crystal Structure, Transformation Strain, and Superelastic Property of Ti-Nb-Zr and Ti-Nb-Ta Alloys
Hee Young Kim et al.
SHAPE MEMORY AND SUPERELASTICITY (2015)
Electrochemical and surface analyses of nanostructured Ti-24Nb-4Zr-8Sn alloys in simulated body solution
J. Li et al.
ACTA BIOMATERIALIA (2014)
Microstructure and mechanical properties of a novel β titanium metallic composite by selective laser melting
B. Vrancken et al.
ACTA MATERIALIA (2014)
Characterization of electrochemical behavior and surface oxide films on superelastic biomedical Ti-Nb-Ta alloy in simulated physiological solutions
Y. S. Zhukova et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Effect of the cooling rate in the corrosion behavior of a hot worked Ti-6Al-4V extra-low interstitial alloy
S. Maya-Johnson et al.
MATERIALS & DESIGN (2014)
Effects of Sn addition on the microstructure, mechanical properties and corrosion behavior of Ti-Nb-Sn alloys
Paulo E. L. Moraes et al.
MATERIALS CHARACTERIZATION (2014)
The role of martensitic transformation in corrosion fatigue failure of Ti-22Nb-6Ta and Ti-22Nb-6Zr (at %) medical alloys
Yu. A. Pustov et al.
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES (2014)
Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium
Dongdong Gu et al.
ACTA MATERIALIA (2012)
Electrochemical corrosion behavior of Ti-24Nb-4Zr-8Sn alloy in a simulated physiological environment
Y. Bai et al.
APPLIED SURFACE SCIENCE (2012)
Effect of Sn addition on the corrosion behavior of Ti-Ta alloy
B. Guo et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2012)
Corrosion behavior of β titanium alloys for biomedical applications
M. Atapour et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)
A study of the micro structural evolution during selective laser melting of Ti-6Al-4V
Lore Thijs et al.
ACTA MATERIALIA (2010)
Corrosion Behavior of Ti-6Al-4V with Different Thermomechanical Treatments and Microstructures
M. Atapour et al.
CORROSION (2010)
A combinatorial passivation study of Ta-Ti alloys
Andrei Ionut Mardare et al.
CORROSION SCIENCE (2009)
Solute segregation and its influence on the microstructure and electrochemical behavior of Ti-Nb-Zr alloys
D. Q. Martins et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Effects of Hf content and immersion time on electrochemical behavior of biomedical Ti-22Nb-xHf alloys in 0.9% NaCl solution
B. L. Wang et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2009)
Corrosion behaviour and biocompatibility evaluation of low modulus Ti-16Nb shape memory alloy as potential biomaterial
Y. B. Wang et al.
MATERIALS LETTERS (2009)
Depassivation current transients measured between identical twin microelectrodes in open circuit
G. T. Burstein et al.
CORROSION SCIENCE (2008)
Electrochemical corrosion behavior of a Ti-35Nb alloy for medical prostheses
Alessandra Cremasco et al.
ELECTROCHIMICA ACTA (2008)
Effects of Zr content on microstructure and corrosion resistance of Ti-30Nb-Zr casting alloys for biomedical applications
Danielle Q. Martins et al.
ELECTROCHIMICA ACTA (2008)
Electrochemical characteristics of titanium based biomaterials in artificial saliva
D. Mareci et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2007)
Nucleation of corrosion pits in Ringer's solution containing bovine serum
G. T. Burstein et al.
CORROSION SCIENCE (2007)
Development of Ti-Mo alloys for biomedical applications: Microstructure and electrochemical characterization
Nilson T. C. Oliveira et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Consolidation phenomena in laser and powder-bed based layered manufacturing
J. -P. Kruth et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Effect of Ta addition on shape memory behavior of Ti-22Nb alloy
HY Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Corrosion resistance of anodic oxides on the Ti-50Zr and Ti-13Nb-13Zr alloys
NTC Oliveira et al.
ELECTROCHIMICA ACTA (2006)
Influence of surface morphology on corrosion and electronic behavior
W Li et al.
ACTA MATERIALIA (2006)
A comparison of the fatigue behavior of cast Ti-7.5Mo with c.p. titanium, Ti-6Al-4V and Ti-13Nb-13Zr alloys
CW Lin et al.
BIOMATERIALS (2005)
Corrosion resistance and biocompatibility of Ti-Ta alloys for biomedical applications
YL Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
The effects of stress level and grain size on the ambient temperature creep deformation behavior of an alpha Ti-1.6 wt pct V alloy
AK Aiyangar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Corrosion behaviour of a pressure die cast magnesium alloy
GL Song et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2005)
The effect of temperature on the nucleation of corrosion pits on titanium in Ringer's physiological solution
GT Burstein et al.
BIOMATERIALS (2005)
Effects of Ta content on Young's modulus and tensile properties of binary Ti-Ta alloys for biomedical applications
YL Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Effects of iron content on microstructure and crevice corrosion of Grade-2 titanium
X He et al.
CORROSION (2004)
Influence of microstructure and alloying elements on corrosion behavior of Ti-13Nb-13Zr alloy
M Geetha et al.
CORROSION SCIENCE (2004)
Beta Ti alloys with low Young's modulus
T Ozaki et al.
MATERIALS TRANSACTIONS (2004)
Biocompatibility of β-stabilizing elements of titanium alloys
E Eisenbarth et al.
BIOMATERIALS (2004)
Electrochemical impedance spectroscopy characterization of passive film formed on implant Ti-6Al-7Nb alloy in Hank's solution
IC Lavos-Valereto et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2004)
The influence of niobium and vanadium on passivity of titanium-based implants in physiological solution
M Metikos-Hukovic et al.
BIOMATERIALS (2003)
Fatigue performance and cyto-toxicity of low rigidity titanium alloy, Ti-29Nb-13Ta-4.6Zr
M Niinomi
BIOMATERIALS (2003)
An image analysis study of pit formation on Ti-6Al-4V
EN Codaro et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Composition/phase structure and properties of titanium-niobium alloys
YH Hon et al.
MATERIALS TRANSACTIONS (2003)
The effect of grain size on the ambient temperature creep deformation behavior of a beta Ti-14.8 V alloy
A Ramesh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)
Structure-property relationship of cast Ti-Nb alloys
CM Lee et al.
JOURNAL OF ORAL REHABILITATION (2002)
Finite element modeling of the morphology of β to α phase transformation in Ti-6Al-4V alloy
I Katzarov et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)
Biocompatibility and osteogenesis of refractory metal implants, titanium, hafnium, niobium, tantalum and rhenium
H Matsuno et al.
BIOMATERIALS (2001)
Phase transformations in Ti-Nb-Ta and Ti-Nb-Ta-Zr alloys
X Tang et al.
JOURNAL OF MATERIALS SCIENCE (2000)
分享论文
