☆ 4.6 Article

Improvement of the Geometric Accuracy for Microstructures by Projection Stereolithography Additive Manufacturing

CRYSTALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Dentistry, Oral Surgery & Medicine

Manufacturing accuracy and volumetric changes of stereolithography additively manufactured zirconia with different porosities

Marta Revilla-Leon et al.

Summary: The aim of this study was to measure the manufacturing accuracy and volumetric changes of additive manufacturing zirconia specimens with different porosities. The results showed that the 40% porosity group achieved the highest manufacturing accuracy and the lowest volumetric changes, while the 0% porosity group had the lowest manufacturing accuracy and the highest volumetric changes.

JOURNAL OF PROSTHETIC DENTISTRY (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printed High Performance Silver Mesh for Transparent Glass Heaters through Liquid Sacrificial Substrate Electric-Field-Driven Jet

Hongke Li et al.

Summary: This study proposes a technique using liquid sacrificial substrate electric-field-driven microscale 3D printing for the fabrication of high performance transparent glass heaters (TGHs). The manufactured TGHs exhibit desirable optoelectronic performance and deicing capability, making them suitable for photothermal and electrothermal systems.

SMALL (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Directly Printed Embedded Metal Mesh for Flexible Transparent Electrode via Liquid Substrate Electric-Field-Driven Jet

Zhenghao Li et al.

Summary: A facile and efficient method is proposed for the fabrication of flexible transparent electrodes (FTEs) with embedded metal meshes via liquid substrate electric-field-driven microscale 3D printing process. The FTEs produced using this method exhibit high-resolution, high-aspect ratio embedded metal meshes without sacrificing transparency. The final manufactured FTEs show excellent optoelectronic performance and mechanical stability.

ADVANCED SCIENCE (2022)

添加到收藏夹

Article Engineering, Manufacturing

A dynamic slicing algorithm for conformal additive manufacturing

Jigang Huang et al.

Summary: A novel strategy for multi-directional slicing is reported in this study, which is simple, accurate, and efficient. The slicing plane of each layer is determined directly, and the geometric relationship is used to evaluate the optimal slicing plane for each layer. A method for searching the optimal slicing plane with a cost-effective computation is also provided. The proposed dynamic slicing algorithm is compared with uniform-directional slicing to verify its performance.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Industrial

Additive manufacturing and the COVID-19 challenges: An in-depth study

Md Sarower Tareq et al.

Summary: The rapid spread of SARS-CoV-2 led to a huge demand for medical equipment and PPE, putting unprecedented pressure on healthcare systems. Additive manufacturing (AM) served as a supplementary manufacturing process to meet explosive demands and address supply chain disruptions.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Conformal Geometry and Multimaterial Additive Manufacturing through Freeform Transformation of Building Layers

Jigang Huang et al.

Summary: A new 3D printing process allows for full degree-of-freedom transformation of each individual building layer, enabling dynamic transformation without the need for time-consuming redesign steps.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Design and optimization of projection stereolithography additive manufacturing system with multi-pass scanning

Qin Qin et al.

Summary: This study proposes a method of multi-pass scanning and a compensation algorithm for SPSL systems to improve stitching quality, which has rarely been studied in previous work. The results demonstrate that multi-pass scanning is an effective approach to enhance stitching quality in SPSL systems, providing valuable advice for achieving satisfactory surface finish with SPSL technology.

RAPID PROTOTYPING JOURNAL (2021)

添加到收藏夹

Article Engineering, Manufacturing

3D printed magnetically-actuating micro-gripper operates in air and water

Guangbin Shao et al.

Summary: The researchers introduced a method to 3D print a magnetically-driven triple-finger micro-gripper for robust micro-manipulation in air and water. By mitigating the trade-off between mechanical compliance and magnetic actuation forces, the monolithic micro-gripper design was rapidly fabricated using a specific manufacturing process, enabling potential applications in biological and biomedical fields.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Manufacturing

High fidelity volumetric additive manufacturing

Indrasen Bhattacharya et al.

Summary: Volumetric additive manufacturing technique CAL utilizes computed axial lithography to create parts that adhere closely to the target geometries, demonstrating good performance with optimized illumination patterns. Experimental results show deviations below 1.05 mm on complex objects fabricated volumetrically in minutes.

ADDITIVE MANUFACTURING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Rapid 3D Printing of Bioinspired Hybrid Structures for High-Efficiency Fog Collection and Water Transportation

Luyang Liu et al.

Summary: Nature provides unique solutions for engineering problems, such as the inspiration from cacti and Nepenthes alata for fog collection and water transportation devices. A bioinspired hybrid fog collector with cactus-inspired spines and peristome-inspired bottom channels with C-IAPGs was developed, showing efficient fog collection and water transportation capabilities. This work is beneficial for the development of next-generation fog collection, water transportation, and desalination devices.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Review Engineering, Industrial

Applications of additive manufacturing (AM) in sustainable energy generation and battle against COVID-19 pandemic: The knowledge evolution of 3D printing

Yanen Wang et al.

Summary: In summary, sustainable and cleaner manufacturing systems have been widely applied in industrial processes, especially in aerospace, automotive, and power generation. Three-dimensional printing (3DP) technology plays an important role in reducing energy consumption and emissions, while also providing critical support for the manufacturing industry during the global COVID-19 pandemic.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

添加到收藏夹

Article Optics

Three-dimensional printing of glass micro-optics

Zhihan Hong et al.

Summary: A novel 3D printing process for glass micro-optics has been developed in this study, which can convert printed optical elements into transparent inorganic glass at low temperatures with specific performance indicators.

OPTICA (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Scalable 3D printing of aperiodic cellular structures by rotational stacking of integral image formation

Seok Kim et al.

Summary: A new integral lithography method is proposed, utilizing a planar lens array to create digital light patterns to expand the printable area and achieve scalable 3D microstructure fabrication, surpassing the resolution-to-area scaling limit.

SCIENCE ADVANCES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Rapid 3D Printing Magnetically Active Microstructures with High Solid Loading

Guangbin Shao et al.

ADVANCED ENGINEERING MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

High-resolution tomographic volumetric additive manufacturing

Damien Loterie et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D Printing Customized Optical Lens in Minutes

Guangbin Shao et al.

ADVANCED OPTICAL MATERIALS (2020)

添加到收藏夹

Review Engineering, Chemical

A Review of Stereolithography: Processes and Systems

Jigang Huang et al.

PROCESSES (2020)

添加到收藏夹

Article Engineering, Manufacturing

An additively manufactured silicone polymer: Thermo-viscoelastic experimental study and computational modelling

Mokarram Hossain et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Multidisciplinary Sciences

3D Printed Ultrastretchable, Hyper-Antifreezing Conductive Hydrogel for Sensitive Motion and Electrophysiological Signal Monitoring

Zhaolong Wang et al.

RESEARCH (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental and numerical investigation of compressive behavior of lattice structures manufactured through projection micro stereolithography

Uzair Ahmed Dar et al.

MATERIALS TODAY COMMUNICATIONS (2020)

添加到收藏夹

Review Engineering, Manufacturing

Projection micro stereolithography based 3D printing and its applications

Qi Ge et al.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Volumetric additive manufacturing via tomographic reconstruction

Brett E. Kelly et al.

SCIENCE (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability

Yang Yang et al.

SCIENCE ADVANCES (2019)

添加到收藏夹

Article Materials Science, Ceramics

Accurate printing of a zirconia molar crown bridge using three-part auxiliary supports and ceramic mask projection stereolithography

Qin Lian et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Simple and customizable method for fabrication of high-aspect ratio microneedle molds using low-cost 3D printing

Kevin J. Krieger et al.

MICROSYSTEMS & NANOENGINEERING (2019)

添加到收藏夹

Article Engineering, Manufacturing

Rapid and Inexpensive Fabrication of Multi-Depth Microfluidic Device using High-Resolution LCD Stereolithographic 3D Printing

Mohamed G. A. Mohamed et al.

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Speed 3D Printing of Millimeter-Size Customized Aspheric Imaging Lenses with Sub 7 nm Surface Roughness

Xiangfan Chen et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

One-step volumetric additive manufacturing of complex polymer structures

Maxim Shusteff et al.

SCIENCE ADVANCES (2017)

添加到收藏夹

Review Biochemical Research Methods

3D printing of functional biomaterials for tissue engineering

Wei Zhu et al.

CURRENT OPINION IN BIOTECHNOLOGY (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Layerless fabrication with continuous liquid interface production

Rima Janusziewicz et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Continuous liquid interface production of 3D objects

John R. Tumbleston et al.

SCIENCE (2015)

添加到收藏夹

Article Engineering, Manufacturing

A Fast Mask Projection Stereolithography Process for Fabricating Digital Models in Minutes

Yayue Pan et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2012)

添加到收藏夹

Article Engineering, Electrical & Electronic

Projection micro-stereolithography using digital micro-mirror dynamic mask

C Sun et al.

SENSORS AND ACTUATORS A-PHYSICAL (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.