☆ 4.6 Article

Flexible 3D Printed Acrylic Composites based on Polyaniline/Multiwalled Carbon Nanotubes for Piezoresistive Pressure Sensors

ADVANCED ELECTRONIC MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

3D Printed Reduced Graphene Oxide/Elastomer Resin Composite with Structural Modulated Sensitivity for Flexible Strain Sensor

Cheng Qian et al.

Summary: In this study, a high-performance flexible strain sensor was developed using a digital light processing-based 3D printing method. The sensor exhibited high sensitivity and mechanical stability, enabling it to monitor various human motions.

ADVANCED ENGINEERING MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bio-Based Piezo- and Thermoresistive Photocurable Sensing Materials from Acrylated Epoxidized Soybean Oil

Cristian Mendes-Felipe et al.

Summary: Bio-based photocurable polymers and functional fillers enable the generation of functional and active smart materials compatible with additive manufacturing technologies. The addition of reduced graphene oxide to acrylated epoxidized soybean oil leads to UV-curable piezoresistive and thermoresistive materials. The composites exhibit good thermal stability, high crosslinking degree, and high electrical conductivity.

MACROMOLECULAR MATERIALS AND ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Polyaniline-nanospines engineered nanofibrous membrane based piezoresistive sensor for high-performance electronic skins

Sudeep Sharma et al.

Summary: This paper proposes a new type of highly sensitive pressure sensor based on hybridized nanofibrous membrane technology, which overcomes the limitations of existing piezoresistive sensors and has high sensitivity and wide pressure range response. The sensor has broad application prospects in the field of electronic skin and wearable electronic devices.

NANO ENERGY (2022)

添加到收藏夹

Article Engineering, Manufacturing

Photo curable resin for 3D printed conductive structures

Shang-Cheng Tsai et al.

Summary: A new resin formulation method was developed in this study to fabricate 3D printed conductive structures using DLP 3D printing technology. Silver-coated copper flakes and silver nanoparticles were tested as conductive fillers, and carbon nanotubes were added to prevent settling. The resulting resin can be used to print 3D metal circuitry structures with high conductivity.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Materials Science, Ceramics

DLP 3D printing of scandia-stabilized zirconia ceramics

Dmitrii A. Komissarenko et al.

Summary: This article aims to explore the printability of scandia-stabilized zirconia ceramic parts using desktop and low-cost DLP 3D printer. Homogeneous slurries with appropriate rheological and UV-curing properties were prepared with scandia-stabilized zirconia powders. The ceramics showed promising Vickers microhardness and high ionic conductivity, demonstrating the potential of DLP as a method for fabricating scandia-stabilized zirconia parts for SOFC applications.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Highly flexible, thermally stable, and static dissipative nanocomposite with reduced functionalized graphene oxide processed through 3D printing

Binbin Guo et al.

Summary: This study developed a reduced functionalized graphene oxide/acrylate nanocomposite through 3D printing technology with flexibility, thermal stability, and static dissipation capacity. A highly efficient ultrasonication method was used to prepare functionalized graphene oxide, increasing its dispersion and stability in acrylate solution for SLA 3D printing. The nanocomposite exhibited impressive electrical conductivity and static dissipative properties, showing potential for smart electronics applications.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Applied

Study on the synthesis of PANI/CNT nanocomposite and its anticorrosion mechanism in waterborne coatings

Jinge Zhang et al.

Summary: In this study, a PANI encapsulated CNT (PANI/CNT) composite with nanofibers morphology was successfully prepared through oxidative polymerization in CNT suspension. The composite showed reversible redox activity in both acidic and neutral media. The PANI/CNT nanocomposite exhibited excellent intelligent protection activity and long-term anticorrosion performance when used as an organic coating material.

PROGRESS IN ORGANIC COATINGS (2021)

添加到收藏夹

Article Polymer Science

High dielectric constant poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) for capacitive pressure and bending sensors

N. Pereira et al.

Summary: Poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) samples were prepared by solvent casting with varying polymer concentration and solvent evaporation temperature. Different sample morphologies and physical-chemical properties were obtained under different processing conditions, while electroactive beta-phase content and degradation temperature remained independent of processing conditions. Pressure and bending capacitive sensors were developed with excellent response and high sensibility based on the high dielectric response of the samples.

POLYMER (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

A 3D flexible piezoresistive sensor based on surface-filled graphene nanosheets conductive layer

Lijun Ma et al.

Summary: A novel surface-filled graphene nanosheets (GNs) conductive layer was utilized to fabricate a highly sensitive, stable and 3D flexible piezoresistive sensor, showing promising potentials in wearable electronics. Compared to surface-coated GNs sensors, the surface-filled GNs sensor exhibited better stability and higher sensitivity, indicating its great potential for health monitoring applications.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Research progress of flexible capacitive pressure sensor for sensitivity enhancement approaches

Ruiqing Li et al.

Summary: This paper reviews a large number of research outputs on sensitivity improvement of flexible capacitive pressure sensors and discusses methods and trends for enhancing the sensitivity of pressure sensors.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Vat Photopolymerization 3D Printing of Advanced Soft Sensors and Actuators: From Architecture to Function

Wenyu Zhao et al.

Summary: The fabrication and assembly of flexible sensors and soft actuators are crucial for enhancing the performance of wearable electronics and soft robots. Traditional manufacturing techniques have limitations, but 3D printing, particularly vat photopolymerization, allows for the production of highly stable architectures with fast speed and high accuracy, revolutionizing mechanics and materials for soft electronics.

ADVANCED MATERIALS TECHNOLOGIES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

DLP 4D-Printing of Remotely, Modularly, and Selectively Controllable Shape Memory Polymer Nanocomposites Embedding Carbon Nanotubes

Alejandro Cortes et al.

Summary: The study investigated novel electro-activated shape memory polymer composites (SMPCs) for digital light processing 3D printing, showing how the composition of the photocurable system and the incorporation of CNTs impact the printability and electrical conductivity. By remotely heating the nanocomposite using the Joule effect, a significant electrically-triggered responsiveness was confirmed, enabling a high shape fixity and shape recovery ratio. Additionally, the research demonstrated the feasibility of activating selective shape recovery through electro-activation for potentially creating remotely controllable smart devices in 4D printing.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Printability Study of a Conductive Polyaniline/Acrylic Formulation for 3D Printing

Goretti Arias-Ferreiro et al.

Summary: This study successfully predicted the printability of polyaniline/acrylate formulations using photorheology and Jacobs working curves, confirming the viability of these conductive composites for applications in flexible electronic devices.

POLYMERS (2021)

添加到收藏夹

Article Computer Science, Hardware & Architecture

A Quantitative Survey of Communication Optimizations in Distributed Deep Learning

Shaohuai Shi et al.

Summary: This article presents a quantitative survey of communication optimization techniques for data parallel distributed deep learning, identifying major challenges and classifying solutions at different levels. A comparative study of seven common methods on a 32-GPU cluster with 100Gb/s InfiniBand reveals the difficulties in scaling DL models with low model intensity, and highlights the critical impact of system architecture and scheduling algorithms on performance. Discussions on open issues for further investigation are also provided.

IEEE NETWORK (2021)

添加到收藏夹

Article Engineering, Environmental

Sub-micron calcium carbonate as a template for the preparation of dendrite-like PANI/CNT nanocomposites and its corrosion protection properties

Min Rui et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Layer-by-Layer Printing of Photopolymers in 3D: How Weak is the Interface?

H. Gojzewski et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Polymer Science

Comparative Studies on Polyurethane Composites Filled with Polyaniline and Graphene for DLP-Type 3D Printing

Hyeonseo Joo et al.

POLYMERS (2020)

添加到收藏夹

Article Polymer Science

Photocured conductive PANI/acrylate composites for digital light processing. Influence of HDODA crosslinker in rheological and physicochemical properties

Goretti Arias-Ferreiro et al.

EUROPEAN POLYMER JOURNAL (2020)

添加到收藏夹

Article Chemistry, Physical

Flexible on-chip micro-supercapacitors: Efficient power units for wearable electronics

Rui Jia et al.

ENERGY STORAGE MATERIALS (2020)

添加到收藏夹

Article Materials Science, Composites

High dielectric constant UV curable polyurethane acrylate/indium tin oxide composites for capacitive sensing

Cristian Mendes-Felipe et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Hybrid (3D and inkjet) printed electromagnetic pressure sensor using metamaterial absorber

Heijun Jeong et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Chemistry, Physical

3D geometrically structured PANI/CNT-decorated polydimethylsiloxane active pressure and temperature dual-parameter sensors for man-machine interaction applications

Yalong Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Article Polymer Science

Electrical and mechanical tuning of 3D printed photopolymer-MWCNT nanocomposites through in situ dispersion

Luis A. Chavez et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A novel highly electrically conductive composite resin for stereolithography

Giorgio Scordo et al.

MATERIALS TODAY COMMUNICATIONS (2019)

添加到收藏夹

Article Engineering, Environmental

Flexible electrically conductive biomass-based aerogels for piezoresistive pressure/strain sensors

Jieyu Huang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Polymer Science

Stimuli responsive UV cured polyurethane acrylated/carbon nanotube composites for piezoresistive sensing

C. Mendes-Felipe et al.

EUROPEAN POLYMER JOURNAL (2019)

添加到收藏夹

Article Chemistry, Physical

Electromechanical Properties of PVDF-Based Polymers Reinforced with Nanocarbonaceous Fillers for Pressure Sensing Applications

Javier Vicente et al.

MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ullmann Reactions of Carbon Nanotubes-Advantageous and Unexplored Functionalization toward Tunable Surface Chemistry

Anna Kolanowska et al.

NANOMATERIALS (2019)

添加到收藏夹

Article Polymer Science

Thermal, optical and electrical properties of UV-curing screen-printed glass substrates

Asli Beyler Cigil et al.

POLYMER BULLETIN (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

State-of-the-Art and Future Challenges of UV Curable Polymer-Based Smart Materials for Printing Technologies

Cristian Mendes-Felipe et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Optimized silk fibroin piezoresistive nanocomposites for pressure sensing applications based on natural polymers

Ander Reizabal et al.

NANOSCALE ADVANCES (2019)

添加到收藏夹

Review Public, Environmental & Occupational Health

Toxicity of carbon nanotubes: A review

Arul Prakash Francis et al.

TOXICOLOGY AND INDUSTRIAL HEALTH (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Lignin-Containing Photoactive Resins for 3D Printing by Stereolithography

Jordan T. Sutton et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Review Electrochemistry

3D printable conductive materials for the fabrication of electrochemical sensors: A mini review

Hairul Hisham Hamzah et al.

ELECTROCHEMISTRY COMMUNICATIONS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A flexible pressure sensor based on rGO/polyaniline wrapped sponge with tunable sensitivity for human motion detection

Gang Ge et al.

NANOSCALE (2018)

添加到收藏夹

Article Polymer Science

Fabrication of Conducting Polyacrylate Resin Solution with Polyaniline Nanofiber and Graphene for Conductive 3D Printing Application

Hoseong Han et al.

POLYMERS (2018)

添加到收藏夹

Article Materials Science, Composites

Piezoresistive polymer blends for electromechanical sensor applications

P. Costa et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Hybrid Materials for Functional 3D Printing

Ido Cooperstein et al.

ADVANCED MATERIALS INTERFACES (2018)

添加到收藏夹

Review Engineering, Manufacturing

O Mechanical characterization of 3D-printed polymers

John Ryan C. Dizon et al.

ADDITIVE MANUFACTURING (2018)

添加到收藏夹

Article Polymer Science

Development of 3D printable formulations containing CNT with enhanced electrical properties

Gustavo Gonzalez et al.

POLYMER (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Compressible Integrated Supercapacitor-Piezoresistance-Sensor System with CNT-PDMS Sponge for Health Monitoring

Yu Song et al.

SMALL (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effects of aniline concentrations on the electrical and mechanical properties of polyaniline polyvinyl alcohol blends

J. Bhadra et al.

ARABIAN JOURNAL OF CHEMISTRY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cyclic temperature dependence of electrical conductivity in polyanilines as a function of the dopant and synthesis method

Laura Horta-Romaris et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Engineering, Manufacturing

Measuring UV curing parameters of commercial photopolymers used in additive manufacturing

Joe Bennett

ADDITIVE MANUFACTURING (2017)

添加到收藏夹

Article Materials Science, Composites

Acrylate-based silver nanocomposite by simultaneous polymerization-reduction approach via 3D stereolithography

Corrado Sciancalepore et al.

COMPOSITES COMMUNICATIONS (2017)

添加到收藏夹

Article Engineering, Manufacturing

Digital light processing 3D printing of conductive complex structures

Quanyi Mu et al.

ADDITIVE MANUFACTURING (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Constructing 3D Graphene Networks in Polymer Composites for Significantly Improved Electrical and Mechanical Properties

Peng Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review

Morteza Amjadi et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printing of Conductive Complex Structures with In Situ Generation of Silver Nanoparticles

Erika Fantino et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Applied

Active corrosion protection by conductive composites of polyaniline in a UV-cured polyester acrylate coating

Shadi Jafarzadeh et al.

PROGRESS IN ORGANIC COATINGS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new approach to construct three dimensional segregated graphene structures in rubber composites for enhanced conductive, mechanical and barrier properties

Yong Lin et al.

JOURNAL OF MATERIALS CHEMISTRY C (2016)

添加到收藏夹

Article Engineering, Environmental

PANI/GO as a super adsorbent for the selective adsorption of uranium(VI)

Dadong Shao et al.

CHEMICAL ENGINEERING JOURNAL (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of polyaniline and ceria nanoparticle additives on corrosion protection of a UV-cure coating on carbon steel

Majid Sababi et al.

CORROSION SCIENCE (2014)

添加到收藏夹

Review Polymer Science

Carbon nanotube-polyaniline composites

Cynthia Oueiny et al.

PROGRESS IN POLYMER SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical, electrical and electro-mechanical properties of thermoplastic elastomer styrene-butadiene-styrene/multiwall carbon nanotubes composites

P. Costa et al.

JOURNAL OF MATERIALS SCIENCE (2013)

添加到收藏夹

Article Polymer Science

UV-curable acrylate-based nanocomposites: effect of polyaniline additives on the curing performance

Shadi Jafarzadeh et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

Electro-mechanical properties of triblock copolymer styrene-butadiene-styrene/carbon nanotube composites for large deformation sensor applications

P. Costa et al.

SENSORS AND ACTUATORS A-PHYSICAL (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

The structure characteristic and electrochemical performance of graphene/polyaniline composites

Ling Liu et al.

SYNTHETIC METALS (2013)

添加到收藏夹

Article Chemistry, Physical

Photopolymerization of acrylate suspensions

Vladislava Tomeckova et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2012)

添加到收藏夹

Article Polymer Science

Enhanced thermal stability of multi-walled carbon nanotubes after coating with polyaniline salt

Zuzana Moravkova et al.

POLYMER DEGRADATION AND STABILITY (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced Thermoelectric Performance of Single-Walled Carbon Nanotubes/Polyaniline Hybrid Nanocomposites

Qin Yao et al.

ACS NANO (2010)

添加到收藏夹

Review Engineering, Biomedical

A review on stereolithography and its applications in biomedical engineering

Ferry P. W. Melchels et al.

BIOMATERIALS (2010)

添加到收藏夹

Article Polymer Science

Multi-wall carbon nanotubes coated with polyaniline

Elena N. Konyushenko et al.

POLYMER (2006)

添加到收藏夹

Article Polymer Science

Doped polyaniline/multi-walled carbon nanotube composites: Preparation, characterization and properties

Tzong-Ming Wu et al.

POLYMER (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Carbon nanotube/polyaniline core-shell nanowires prepared by in situ inverse microemulsion

YJ Yu et al.

SYNTHETIC METALS (2005)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nanostructured polyaniline sensors

J Huang et al.

CHEMISTRY-A EUROPEAN JOURNAL (2004)

添加到收藏夹

Article Chemistry, Multidisciplinary

Polyaniline. Preparation of a conducting polymer (IUPAC technical report)

J Stejskal et al.

PURE AND APPLIED CHEMISTRY (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.