相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Erosion Layer Growth between Solid 316L Stainless Steel and Al-Li Alloy Melt
Zhanwei He et al.
METALS (2022)
Effects of Al or Mo Addition on Microstructure and Mechanical Properties of Fe-Rich Nonequiatomic FeCrCoMnNi High-Entropy Alloy
Shuliang Wang et al.
METALS (2022)
Microstructural Characteristics and Strengthening Mechanisms of Ferritic-Martensitic Dual-Phase Steels: A Review
Farzad Badkoobeh et al.
METALS (2022)
The Effect of Co-Encapsulated GO-Cu Nanofillers on Mechanical Properties, Cell Response, and Antibacterial Activities of Mg-Zn Composite
Abbas Saberi et al.
METALS (2022)
Crystal Chemistry and Electronic Properties of the Al-Rich Compounds, Al2Cu, ω-Al7Cu2Fe and θ-Al13Fe4 with Cu Solution
Changming Fang et al.
METALS (2022)
Wear Resistance of FeCrAlNbNi Alloyed Zone via Laser Surface Alloying on 304 Stainless Steel
Chunsheng Cui et al.
METALS (2022)
Effect of Diffusion on Dissimilar Welded Joint between Al0.8CoCrFeNi High-Entropy Alloy and S235JR Structural Steel
Ionelia Voiculescu et al.
METALS (2022)
Evaluation of Microstructural and Mechanical Behavior of AHSS CP780 Steel Welded by GMAW-Pulsed and GMAW-Pulsed-Brazing Processes
Alan Jadir Romero-Orozco et al.
METALS (2022)
Microstructural Analysis and Mechanical Properties of a Hybrid Al/Fe2O3/Ag Nano-Composite
Khansaa Dawood Salman et al.
APPLIED SCIENCES-BASEL (2022)
Microstructure and Corrosion Performance of Aluminium Matrix Composites Reinforced with Refractory High-Entropy Alloy Particulates
Elias Ananiadis et al.
APPLIED SCIENCES-BASEL (2021)
Study on Microstructure and In Situ Tensile Deformation Behavior of Fe-25Mn-xAl-8Ni-C Alloy Prepared by Vacuum Arc Melting
Yaping Bai et al.
METALS (2021)
Several Aspects of Application of Nanodiamonds as Reinforcements for Metal Matrix Composites
Vladimir Popov
APPLIED SCIENCES-BASEL (2021)
Effect of Heat Treatment on Microstructure and Creep Behavior of Fe-40Ni-24Cr Alloy
Maureen Mudang et al.
APPLIED SCIENCES-BASEL (2021)
Friction Stir Welding/Processing of Mg-Based Alloys: A Critical Review on Advancements and Challenges
Farzad Badkoobeh et al.
MATERIALS (2021)
Spark plasma sintering of ZrO2-Al2O3 nanocomposites at low temperatures aided by amorphous powders
Xiqing Xu et al.
CERAMICS INTERNATIONAL (2020)
Effect of nickel addition on densification, microstructure and wear behaviour of spark plasma sintered CP-titanium
Azeez Lawan Rominiyi et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Graphene Family Nanomaterial Reinforced Magnesium-Based Matrix Composites for Biomedical Application: A Comprehensive Review
Somayeh Abazari et al.
METALS (2020)
Carbon Nanotubes (CNTs)-Reinforced Magnesium-Based Matrix Composites: A Comprehensive Review
Somayeh Abazari et al.
MATERIALS (2020)
The Effect of a Composite Nanostructure on the Mechanical Properties of a Novel Al-Cu-Mn Alloy through Multipass Cold Rolling and Aging
Ke Feng et al.
APPLIED SCIENCES-BASEL (2020)
Intereaction and intermetallic phase formation between aluminum and stainless steel
Bin Liu et al.
RESULTS IN PHYSICS (2019)
Polycrystalline infrared-transparent MgO fabricated by spark plasma sintering
Reza Pournajaf et al.
CERAMICS INTERNATIONAL (2019)
Hot deformation behavior of a spark plasma sintered Fe-25Al-1.5Ta alloy with strengthening Laves phase
A. Emdadi et al.
INTERMETALLICS (2019)
Enhanced Tensile Plasticity in Ultrafine Lamellar Eutectic Al-CuBased Composites with α-Al Dendrites Prepared by Progressive Solidification
Jialin Cheng et al.
APPLIED SCIENCES-BASEL (2019)
Effects of alloying elements on the stability and mechanical properties of Fe3Al from first-principles calculations
Nayoung Park et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Mechanical properties and electronic structures of Fe-Al intermetallic
YaHui Liu et al.
PHYSICA B-CONDENSED MATTER (2017)
Microstructures, mechanical properties and oxidation behaviour of single-phase Fe3Al (D03) and two-phase α-Fe,Al (A2) + Fe3Al (D03) Fe-Al-V alloys
L. Sencekova et al.
INTERMETALLICS (2016)
A Review on the Properties of Iron Aluminide Intermetallics
Mohammad Zamanzade et al.
CRYSTALS (2016)
A study on the formation of iron aluminide (FeAl) from elemental powders
H. Sina et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Development of nano-structured duplex and ferritic stainless steels by pulverisette planetary milling followed by pressureless sintering
R. Shashanka et al.
MATERIALS CHARACTERIZATION (2015)
Optimization of milling parameters for the synthesis of nano-structured duplex and ferritic stainless steel powders by high energy planetary milling
R. Shashanka et al.
POWDER TECHNOLOGY (2015)
Phase transformation and microstructure study of nano-structured austenitic and ferritic stainless steel powders prepared by planetary milling
R. Shashanka et al.
POWDER TECHNOLOGY (2014)
The effect of Zr addition on creep of Fe-30 at.% Al alloys
F. Dobes et al.
INTERMETALLICS (2013)
Thermodynamic analysis of solid solution formation in the nanocrystalline Fe-Ti-Al ternary system during mechanical alloying
M. Rafiei et al.
JOURNAL OF CHEMICAL THERMODYNAMICS (2013)
Mechanically alloyed nanocomposites
C. Suryanarayana et al.
PROGRESS IN MATERIALS SCIENCE (2013)
Thermodynamic analysis of nanocrystalline and amorphous phase formation in Nb-Al system during mechanical alloying
H. Mostaan et al.
POWDER METALLURGY (2012)
Synthesis and formation mechanism of nanostructured NbAl3 intermetallic during mechanical alloying and a kinetic study on its formation
H. Mostaan et al.
THERMOCHIMICA ACTA (2012)
Fe-Al phase formation around SHS reactions under isothermal conditions
Ewelina Pochec et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Microstructure and mechanical properties of Fe3Al alloys prepared by MA-PAS and MA-HP
Wang Jian et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)
High-temperature relaxation analysis in a fine-grain B2 FeAl intermetallic
P. Simas et al.
INTERMETALLICS (2010)
Combined ab initio and experimental study of structural and elastic properties of Fe3Al-based ternaries
Martin Friak et al.
INTERMETALLICS (2010)
The effect of Ti addition on alloying and formation of nanocrystalline structure in Fe-Al system
M. Rafiei et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Dry sliding wear behavior of Fe3Al alloys prepared by mechanical alloying and plasma activated sintering
Jian Wang et al.
WEAR (2010)
The structure and mechanical properties of Fe3Al-30 vol.% Al2O3 nanocomposite
M. Khodaei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Characterization and formation mechanism of nanocrystalline (Fe,Ti)3Al intermetallic compound prepared by mechanical alloying
M. Rafiei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Mechanochemically synthesized Fe3Al-Al2O3 nanocomposite
M. Khodaei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Mechanochemical synthesis of (Fe,Ti)3Al-Al2O3 nanocomposite
M. Rafiei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Effect of fabrication methods on microstructure and mechanical properties of Fe3Al-based alloys
Jian Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Microstructure and mechanical properties of Fe3Al-based alloys with strengthening boride precipitates
R. Krein et al.
INTERMETALLICS (2007)
Structural evolution and grain growth kinetics of the Fe-28Al elemental powder during mechanical alloying and annealing
W. M. Tang et al.
INTERMETALLICS (2007)
Nanoscratching of nylon 66-based ternary nanocomposites
Aravind Dasari et al.
ACTA MATERIALIA (2007)
Mechanical properties of Fe3Al-based alloys with addition of carbon, niobium and titanium
ZR Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Formation mechanism of Fe3Al and FeAl intermetallic compounds during mechanical alloying
MH Enayati et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Wear of iron-aluminide intermetallic-based alloys and composites by hard particles
DE Alman et al.
WEAR (2001)
Moisture and hydrogen-induced embrittlement of Fe3Al alloys
WC Luu et al.
MATERIALS CHEMISTRY AND PHYSICS (2001)
Effects of titanium addition on the microstructure and mechanical behavior of iron aluminide Fe3Al
SM Zhu et al.
MATERIALS TRANSACTIONS (2001)
Characterization of Fe3Al-based intermetallic alloys fabricated by mechanical alloying and HIP consolidation
SM Zhu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)