☆ 4.6 Article

Understanding the Mechanisms of SiC-Water Reaction during Nanoscale Scratching without Chemical Reagents

MICROMACHINES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Multidisciplinary

Non-contact grinding/thinning of silicon carbide wafer by pure EDM using a rotary cup wheel electrode

Junming Guan et al.

Summary: The study developed pure electrical discharge machining as an alternative for non-contact wafer grinding and thinning, achieving high precision and low cost. The response mechanism of hard, brittle crystalline SiC material to pulse conditions was elucidated through experiments and simulation, while the material removal behavior, grinding stability, surface integrity, and wafer shape accuracy were comprehensively investigated under various conditions.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2022)

添加到收藏夹

Article Chemistry, Physical

Controllable material removal behavior of 6H-SiC wafer in nanoscale polishing

Qiufa Luo et al.

Summary: In this study, the interaction between diamond abrasives and the 6H-SiC wafer surface during ultra-precision polishing was analyzed through experiments and molecular dynamics simulations. It was found that controlling material removal uniformity and restricting abrasive cutting depth to tens of nanometers or less can achieve a smooth, scratch-free and almost damage-free wafer surface. These findings provide insights into the importance of controlling material removal uniformity in nanoscale manufacturing processes.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-Speed Etching of Silicon Carbide Wafer Using High-Pressure SF6 Plasma

Yasuhisa Sano et al.

Summary: Plasma etching with high-pressure SF6 plasma is proposed as a method for thinning SiC wafers without crystallographic damages. The removal rate is primarily influenced by power density and relatively unaffected by parameters such as processing gap and gas flow rate. An increase in radio frequency power can achieve high-speed etching of SiC wafers, with the potential to thin a 2-inch wafer to approximately 100 mu m in just 20 minutes.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Review Engineering, Electrical & Electronic

Stress/strain characterization in electronic packaging by micro-Raman spectroscopy: A review

Lulu Ma et al.

Summary: This review presents the applications of micro-Raman spectroscopy in characterizing residual strain and stress in electronic packaging, highlighting its nondestructive and high spatial resolution features. A comparison with other measurement techniques is illustrated, along with discussions on the basics of micro-Raman spectroscopy in stress/strain measurement and recent progress in residual stress evaluation. Two case studies on electronic packaging are presented, and challenges for future development are discussed.

MICROELECTRONICS RELIABILITY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Quality Few-Layer Graphene on Single-Crystalline SiC thin Film Grown on Affordable Wafer for Device Applications

Norifumi Endoh et al.

Summary: This research proposes a new method for growing high-quality few-layer graphene on device-type wafers using a hybrid SiC template, addressing the challenge of balancing quality and affordability. The quality of graphene grown on this hybrid SiC is comparable to that on expensive SiC bulk crystals, showing potential for high-speed devices.

NANOMATERIALS (2021)

添加到收藏夹

Article Chemistry, Analytical

Study on the Mechanism of Solid-Phase Oxidant Action in Tribochemical Mechanical Polishing of SiC Single Crystal Substrate

Wanting Qi et al.

Summary: The research found that all solid-phase oxidants, except NaOH, could decompose to produce oxygen under friction, leading to complex tribochemical reactions with SiC and the formation of SiO2 oxide layers. Polishing with NaOH resulted in the highest surface material removal rate (MRR) due to the generation of SiO2 oxide layers and soluble Na2SiO3 on the SiC surface. On the other hand, the lowest MRR was achieved after dry polishing of SiC with KClO3.

MICROMACHINES (2021)

添加到收藏夹

Article Chemistry, Analytical

Optimisation of Lapping Process Parameters for Single-Crystal 4H-SiC Using Orthogonal Experiments and Grey Relational Analysis

Jiayun Deng et al.

Summary: By conducting orthogonal experiments and grey relational analysis, the study investigated the effects of lapping process parameters on lapping performance for SiC, revealing that lapping plate types, abrasive size, and their interaction had the most significant effects on MRRm and Ra, contributing over 85%; the interaction between lapping plate types and abrasive size also had a significant effect on TTV, with a contribution of up to 51.07%.

MICROMACHINES (2021)

添加到收藏夹

Article Thermodynamics

Ultra-precision grinding of 4H-SiC wafer by PAV/PF composite sol-gel diamond wheel

Kaiping Feng et al.

Summary: The study proposed a PVA/PF composite sol-gel diamond wheel to eliminate deep scratches on the 4H-SiC wafer surface in the grinding process. By shearing and dispersing diamond and fillers in the composite sol glue, freezing at low temperature, and sintering, a higher strength and better hardness uniformity sol-gel diamond wheel was obtained. Grinding experiments showed that using the sol-gel diamond wheel resulted in better surface quality and uniformity compared to using a hot pressing diamond wheel.

ADVANCES IN MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Subsurface damages beneath fracture pits of reaction-bonded silicon carbide after ultra-precision grinding

Zhipeng Li et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Article Engineering, Manufacturing

Study on high efficient sapphire wafer processing by coupling SG-mechanical polishing and GLA-CMP

Yongchao Xu et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)

添加到收藏夹

Article Chemistry, Physical

In situ atomic-scale observation of monolayer graphene growth from SiC

Kaihao Yu et al.

NANO RESEARCH (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Nanomanufacturing of silicon surface with a single atomic layer precision via mechanochemical reactions

Lei Chen et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Photocatalysis assisting the mechanical polishing of a single-crystal SiC wafer utilizing an anatase TiO2-coated diamond abrasive

Jing Lu et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Ceramics

Removal mechanism of sapphire substrates (0001, 1120 and 1010) in mechanical planarization machining

Qiufa Luo et al.

CERAMICS INTERNATIONAL (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Revealing the deformation mechanisms of 6H-silicon carbide under nano-cutting

Zhonghuai Wu et al.

COMPUTATIONAL MATERIALS SCIENCE (2017)

添加到收藏夹

Article Chemistry, Physical

Atomic insight into tribochemical wear mechanism of silicon at the Si/SiO2 interface in aqueous environment: Molecular dynamics simulations using ReaxFF reactive force field

Jialin Wen et al.

APPLIED SURFACE SCIENCE (2016)

添加到收藏夹

Article Engineering, Mechanical

A comparative study on the material removal mechanisms of 6H-SiC polished by semi-fixed and fixed diamond abrasive tools

Q. F. Luo et al.

WEAR (2016)

添加到收藏夹

Review Chemistry, Physical

The ReaxFF reactive force-field: development, applications and future directions

Thomas P. Senftle et al.

NPJ COMPUTATIONAL MATERIALS (2016)

添加到收藏夹

Article Engineering, Manufacturing

The influence of speed on material removal mechanism in high speed grinding with single grit

Lin Tian et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)

添加到收藏夹

Article Engineering, Manufacturing

The effects of abrasive yielding on the polishing of SiC wafers using a semi-fixed flexible pad

Jing Lu et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)

添加到收藏夹

Article Materials Science, Coatings & Films

Chemical mechanical planarization (CMP) of on-axis Si-face SiC wafer using catalyst nanoparticles in slurry

Yan Zhou et al.

SURFACE & COATINGS TECHNOLOGY (2014)

添加到收藏夹

Article Chemistry, Physical

X-ray photoelectron spectroscopy (XPS) and diffraction (XPD) study of a few layers of graphene on 6H-SiC(0001)

D. Ferrah et al.

SURFACE SCIENCE (2013)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Nanogrinding of SiC wafers with high flatness and low subsurface damage

Huo Feng-wei et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)

添加到收藏夹

Proceedings Paper Electrochemistry

Wafer Backside Thinning Process Integrated With Post-Thinning Clean and TSV Exposure Recess Etch

M. Zhao et al.

CHINA SEMICONDUCTOR TECHNOLOGY INTERNATIONAL CONFERENCE 2012 (CSTIC 2012) (2012)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Performance of a 650V SiC diode with reduced chip thickness

Roland Rupp et al.

SILICON CARBIDE AND RELATED MATERIALS 2011, PTS 1 AND 2 (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Deconfinement leads to changes in the nanoscale plasticity of silicon

Dariusz Chrobak et al.

NATURE NANOTECHNOLOGY (2011)

添加到收藏夹

Article Engineering, Mechanical

In situ monitoring and depth-resolved characterization of wet wear of silicon carbide

V. Presser et al.

WEAR (2011)

添加到收藏夹

Article Physics, Applied

Transmission electron microscopy investigations of epitaxial graphene on C-terminated 4H-SiC

J. Borysiuk et al.

JOURNAL OF APPLIED PHYSICS (2010)

添加到收藏夹

Article Chemistry, Physical

A reactive molecular dynamics simulation of the silica-water interface

Joseph C. Fogarty et al.

JOURNAL OF CHEMICAL PHYSICS (2010)

添加到收藏夹

Article Physics, Applied

Raman spectra of epitaxial graphene on SiC(0001)

J. Roehrl et al.

APPLIED PHYSICS LETTERS (2008)

添加到收藏夹

Article Chemistry, Physical

ReaxFF reactive force field for molecular dynamics simulations of hydrocarbon oxidation

Kimberly Chenoweth et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2008)

添加到收藏夹

Article Engineering, Industrial

Material removal mechanisms in lapping and polishing

CJ Evans et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)

添加到收藏夹

Article Chemistry, Physical

ReaxFF: A reactive force field for hydrocarbons

ACT van Duin et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2001)

添加到收藏夹

Article Engineering, Electrical & Electronic

Effects of process parameter variations on the removal rate in chemical mechanical polishing of 4H-SiC

CL Nelson et al.

JOURNAL OF ELECTRONIC MATERIALS (2001)

添加到收藏夹

Article Engineering, Electrical & Electronic

Self-heating effects in silicon carbide MESFETs

AS Royet et al.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2000)

添加到收藏夹

Article Physics, Condensed Matter

Investigation of amorphous states of SiO2 by Raman scattering spectroscopy

VK Malinovsky et al.

PHYSICS OF THE SOLID STATE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.