4.7 Article

Shape Memory Behaviour of PMMA-Coated NiTi Alloy under Thermal Cycle

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Interface failure and delamination resistance of fiber-reinforced geopolymer composite by simulation and experimental method

Sneha Samal

Summary: This study evaluated the inner strength and delamination behavior of carbon and E-glass fiber-reinforced composites. The results showed that the interlaminar strength of the carbon fiber-reinforced geopolymer composite was stronger, with better delamination resistance, while the E-glass fiber-reinforced composite had weaker interlaminar strength.

CEMENT & CONCRETE COMPOSITES (2022)

Review Polymer Science

Shape Memory Polymer-Based Endovascular Devices: Design Criteria and Future Perspective

Sergio A. Pineda-Castillo et al.

Summary: Devices for endovascular embolization of intracranial aneurysms face limitations in achieving complete occlusion. Shape memory polymers have the potential to improve occlusion rates by tailoring to a patient's condition. However, there are still limitations that need to be addressed for effective treatment.

POLYMERS (2022)

Review Materials Science, Multidisciplinary

Shape Memory Alloys and Polymers for MEMS/NEMS Applications: Review on Recent Findings and Challenges in Design, Preparation, and Characterization

Ivo Stachiv et al.

Summary: The rapid progress in material science and nanotechnology has led to the development of shape memory alloys and shape memory polymers, which have unique properties such as shape memory effect and high energy density. These materials can sustain large deformations and recover their original shape, and they can also be reprogrammed to meet desired functional properties. Future research directions include harnessing their potential in nanotechnology applications.

METALS (2021)

Article Chemistry, Multidisciplinary

Net-Shape NiTi Shape Memory Alloy by Spark Plasma Sintering Method

Sneha Samal et al.

Summary: The spark plasma sintering approach was used to analyze the shape memory effect of a NiTi alloy, showing good shape memory effects at 900 degrees C but with 2.5% porosity due to a load of 48 MPa. The specimens displayed significant austenite phases with a bending strain recovery of >2.5%.

APPLIED SCIENCES-BASEL (2021)

Article Chemistry, Multidisciplinary

Investigation of Dispersion, Interfacial Adhesion of Isotropic and Anisotropic Filler in Polymer Composite

Sneha Samal et al.

Summary: The movement and interfacial adhesion of isotropic and anisotropic particles of iron and graphite within the polymer matrix were examined using COMSOL simulation. Regular carbonyl iron particles and irregular graphite particles were mixed in a silicone rubber matrix, showing differences in particle-matrix interactions and distribution.

APPLIED SCIENCES-BASEL (2021)

Article Materials Science, Multidisciplinary

Fabrication of Thermal Plasma Sprayed NiTi Coatings Possessing Functional Properties

Sneha Samal et al.

Summary: Thick NiTi shape memory alloy coatings were successfully produced on graphite and AISI 304 substrates using radio frequency inductively-coupled plasma spray technology. The coatings exhibited martensitic transformation and shape memory effect, indicating their potential for practical applications. Further optimization is necessary to enhance the microstructural and chemical homogeneity of the coatings.

COATINGS (2021)

Article Instruments & Instrumentation

Thermomechanical behavior of shape memory alloy metal matrix composite actuator manufactured by composite extrusion

C. Dahnke et al.

SMART MATERIALS AND STRUCTURES (2019)

Article Materials Science, Multidisciplinary

A Two-Way Shape Memory Study on Ni-Rich NiTi Shape Memory Alloy by Combination of the All-Round Treatment and the R-Phase Transformation

Z. H. Wu et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)

Article Materials Science, Multidisciplinary

NiTi-Polyimide Composites Prepared Using Thermal Imidization Process

D. Vokoun et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)

Article Polymer Science

Biocompatible shape memory polymer actuators with high force capabilities

Janice J. Song et al.

EUROPEAN POLYMER JOURNAL (2015)

Article Engineering, Electrical & Electronic

Development of a Flexible and Disposable Microneedle-Fluidic-System With Finger-Driven Drug Loading and Delivery Functions for Inflammation Treatment

Zhuolin Xiang et al.

JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2015)

Article Neurosciences

NeuroGrid: recording action potentials from the surface of the brain

Dion Khodagholy et al.

NATURE NEUROSCIENCE (2015)

Review Mechanics

Review and perspectives: shape memory alloy composite systems

Brian T. Lester et al.

ACTA MECHANICA (2015)

Proceedings Paper Business

Shape-Memory Applications in Textile Design

Mustafa O. Gok et al.

WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP (2015)

Review Materials Science, Multidisciplinary

A review of shape memory alloy research, applications and opportunities

Jaronie Mohd Jani et al.

MATERIALS & DESIGN (2014)

Article Engineering, Electrical & Electronic

Development of PMMA-based gas sensor and its evaluation using a VOC dilution flow system

N. Shiraishi et al.

MICROELECTRONIC ENGINEERING (2014)

Article Instruments & Instrumentation

Actuation curvature limits for a composite beam with embedded shape memory alloy wires

S. Naghashian et al.

SMART MATERIALS AND STRUCTURES (2014)

Article Gastroenterology & Hepatology

A novel ingestible electronic drug delivery and monitoring device

Peter J. van der Schaar et al.

GASTROINTESTINAL ENDOSCOPY (2013)

Article Instruments & Instrumentation

Design of two-way reversible bending actuator based on a shape memory alloy/shape memory polymer composite

Minoru Taya et al.

SMART MATERIALS AND STRUCTURES (2013)

Article Materials Science, Multidisciplinary

Simulation and analysis of shape memory alloy fiber reinforced composite based on cohesive zone model

Hongshuai Lei et al.

MATERIALS & DESIGN (2012)

Review Materials Science, Multidisciplinary

Stimulus-responsive shape memory materials: A review

L. Sun et al.

MATERIALS & DESIGN (2012)

Article Materials Science, Multidisciplinary

Characterization of a shape memory alloy hybrid composite plate subject to static loading

Fathollah Taheri-Behrooz et al.

MATERIALS & DESIGN (2011)

Article Polymer Science

Multifunctional fiberglass-reinforced PMMA-BaTiO3 structural/dielectric composites

Eduard A. Stefanescu et al.

POLYMER (2011)

Article Multidisciplinary Sciences

Epidermal Electronics

Dae-Hyeong Kim et al.

SCIENCE (2011)

Review Materials Science, Multidisciplinary

Shape memory materials

W. M. Huang et al.

MATERIALS TODAY (2010)

Article Biochemical Research Methods

PMMA/PDMS valves and pumps for disposable microfluidics

Wenhua Zhang et al.

LAB ON A CHIP (2009)

Article Materials Science, Multidisciplinary

Characterisation and vapour sensing properties of spin coated thin films of anthracene labelled PMMA polymer

I. Capan et al.

MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2009)

Article Materials Science, Multidisciplinary

Characterisation and optical vapour sensing properties of PMMA thin films

I. Capan et al.

MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2009)

Article Materials Science, Multidisciplinary

Stress generation by shape memory alloy wires embedded in polymer composites

D. Bollas et al.

ACTA MATERIALIA (2007)

Review Materials Science, Multidisciplinary

New materials for micro-scale sensors and actuators An engineering review

Stephen A. Wilson et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2007)

Article Engineering, Electrical & Electronic

Spin-coated PMMA films

N. G. Semaltianos

MICROELECTRONICS JOURNAL (2007)

Article Nanoscience & Nanotechnology

Role of external applied stress on the two-way shape memory effect

X. M. Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

Article Materials Science, Multidisciplinary

R-phase transformation phenomena in thermomechanically loaded NiTi polycrystals

P Sittner et al.

MECHANICS OF MATERIALS (2006)

Article Nanoscience & Nanotechnology

Part II. Thermomechanical characteristics of shape memory alloy composites

KA Tsoi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Article Nanoscience & Nanotechnology

Medical shape memory alloy applications - the market and its products

NB Morgan

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Article Nanoscience & Nanotechnology

Can shape memory alloy composites be smart?

V Michaud

SCRIPTA MATERIALIA (2004)

Article Nanoscience & Nanotechnology

Two-way shape memory effect in Fe-28-8 at.% Pd melt-spun ribbons

D Vokoun et al.

SCRIPTA MATERIALIA (2002)

Article Materials Science, Multidisciplinary

Transformational behaviour of constrained shape memory alloys

KA Tsoi et al.

ACTA MATERIALIA (2002)

Article Materials Science, Multidisciplinary

Two-way shape memory effect of TiNi alloys induced by hydrogenation

CC Leu et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)

Article Materials Science, Multidisciplinary

Two-way shape memory effect of NiTi alloy induced by constraint aging treatment at room temperature

CY Chang et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)

Article Engineering, Manufacturing

Adaptive composites incorporating shape memory alloy wires. Part 2: development of internal recovery stresses as a function of activation temperature

J Parthenios et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)

Article Engineering, Electrical & Electronic

Thin film shape memory microvalves with adjustable operation temperature

M Kohl et al.

SENSORS AND ACTUATORS A-PHYSICAL (2000)