Design and Mechanical Characterization Using Digital Image Correlation of Soft Tissue-Mimicking Polymers

Present and future anatomical models for biomedical applications will need bio-mimicking three-dimensional (3D)-printed tissues. These would enable, for example, the evaluation of the quality-performance of novel devices at an intermediate step between ex-vivo and in-vivo trials. Nowadays, PolyJet technology produces anatomical models with varying levels of realism and fidelity to replicate organic tissues. These include anatomical presets set with combinations of multiple materials, transitions, and colors that vary in hardness, flexibility, and density. This study aims to mechanically characterize multi-material specimens designed and fabricated to mimic various bio-inspired hierarchical structures targeted to mimic tendons and ligaments. A Stratasys((R)) J750((TM)) 3D Printer was used, combining the Agilus30((TM)) material at different hardness levels in the bio-mimicking configurations. Then, the mechanical properties of these different options were tested to evaluate their behavior under uni-axial tensile tests. Digital Image Correlation (DIC) was used to accurately quantify the specimens' large strains in a non-contact fashion. A difference in the mechanical properties according to pattern type, proposed hardness combinations, and matrix-to-fiber ratio were evidenced. The specimens V, J1, A1, and C were selected as the best for every type of pattern. Specimens V were chosen as the leading combination since they exhibited the best balance of mechanical properties with the higher values of Modulus of elasticity (2.21 +/- 0.17 MPa), maximum strain (1.86 +/- 0.05 mm/mm), and tensile strength at break (2.11 +/- 0.13 MPa). The approach demonstrates the versatility of PolyJet technology that enables core materials to be tailored based on specific needs. These findings will allow the development of more accurate and realistic computational and 3D printed soft tissue anatomical solutions mimicking something much closer to real tissues.

Automated summary

This study used PolyJet technology to create bio-mimicking 3D-printed tissue models and evaluated their mechanical properties. The results showed that the mechanical properties varied according to pattern type and material combination. Specimens V were identified as the best combination with the highest mechanical properties. These findings are important for the development of more accurate and realistic computational and 3D printed soft tissue anatomical models.