☆ 4.7 Article

Potentiality of Utilizing Woven Pineapple Leaf Fibre for Polymer Composites

POLYMERS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Textiles

Effect of layering sequence on mechanical properties of woven kenaf/jute fabric hybrid laminated microwave-processed composites

Manoj Kumar Singh et al.

Summary: In this research, multi-layered composites of pure and hybrid woven fibre mats were fabricated using a microwave-assisted compression moulding process. Different hybrid composites were produced by stacking different fibre mats and matrix materials. It was found that the stacking sequence had a minimal effect on the flexural strength, tensile strength, and impact strength of the composites.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

添加到收藏夹

Article Materials Science, Textiles

Influence of Stacking Sequence and Fiber Content on the Mechanical Properties of Natural and Synthetic Fibers Reinforced Penta-Layered Hybrid Composites

V Mohanavel et al.

Summary: This study investigates the influence of fiber content, stacking pattern, and sequence on the mechanical properties of hybrid composites. It was found that the presence of glass fiber mats during the stacking process has a significant effect on the mechanical properties of the composites. The results showed changes in strength and toughness depending on the composition and arrangement of fibers in the composites.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effect of Stacking Sequences, Fabric Orientations, and Chemical Treatment on the Mechanical Properties of Hybrid Woven Jute-Ramie Composites

C. Tezara et al.

Summary: The research analyzed the effect of stacking sequences, fibre orientations, and alkali treatment on the mechanical properties of hybrid jute and ramie reinforced vinyl ester composites. It was found that composites with 0 degrees fibre orientation showed significantly higher tensile and flexural strength, and combining fibre orientation with lower alkali treatment concentration can improve the mechanical properties of the composites.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Mechanical

Effects of stacking sequence of pineapple leaf-flax reinforced hybrid composite laminates on mechanical characterization and moisture resistant properties

Santosh Kumar et al.

Summary: The study concluded that stacking sequence significantly affects the performance of pineapple leaf fiber and flax fiber composite materials. Increasing flax fiber content improves mechanical and moisture resistant properties, while increasing pineapple leaf fiber content enhances elongation and flexibility. Outer layer flax fiber configuration enhances tensile, flexural, impact, and moisture properties, while inner layer flax fibers improve shear properties.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

添加到收藏夹

Article Materials Science, Textiles

The Effects of Stacking Sequence on the Tensile and Flexural Properties of Kenaf/Jute Fibre Hybrid Composites

T. Khan et al.

Summary: This study analyzed the effects of stacking sequence of kenaf and jute fibers on hybrid composites, showing that K/J/K composites exhibited higher tensile and flexural properties with better fiber/matrix interfacial bonding compared to J/K/J composites. The layering sequence plays an important role in the mechanical performance of hybrid composites for potential engineering applications like aircraft interiors.

JOURNAL OF NATURAL FIBERS (2021)

添加到收藏夹

Article Materials Science, Textiles

Tensile and Bending Strength Analysis of Ramie Fiber and Woven Ramie Reinforced Epoxy Composite

Zulkifli Djafar et al.

Summary: The study reveals that the number of woven ramie layers and the weight of the ramie fiber greatly impact the tensile and bending strengths of the composite. The highest strengths were observed in the five layers of woven ramie composite and the E type of ramie fiber.

JOURNAL OF NATURAL FIBERS (2021)

添加到收藏夹

Article Polymer Science

The Effect of Hybridisation on Mechanical Properties and Water Absorption Behaviour of Woven Jute/Ramie Reinforced Epoxy Composites

Cionita Tezara et al.

Summary: This study investigates the mechanical properties of epoxy composites reinforced by jute-ramie hybridisation, finding that the hybrid composite outperforms pure jute composites. However, exposure to aqueous environments leads to a reduction in mechanical properties, although they remain higher than those of pure epoxy resin. The appropriate stacking sequence and material selection significantly impact mechanical properties and water absorption behavior of the composites.

POLYMERS (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Mechanical properties of hybrid sugar palm/ramie fibre reinforced epoxy composites

J. P. Siregar et al.

Summary: The study on reinforced epoxy hybrid composites of sugar palm fiber and ramie fiber showed that the mechanical properties were enhanced. The hybrid composite with a higher tensile and flexural strength exhibited positive hybridization effects, contributing to the success in achieving a green composite.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Polymer Science

A comparison study on the mechanical properties of composites based on kenaf and pineapple leaf fibres

Lin Feng Ng et al.

POLYMER BULLETIN (2020)

添加到收藏夹

Article Materials Science, Textiles

Effect of Stacking Sequence on Mechanical Properties and Moisture Absorption Characteristic of Hybrid PALF/Glass Fiber Composites

A. Karimzadeh et al.

FIBERS AND POLYMERS (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Influence of sequential positioning of fibre mats in enhancing the properties of natural fibre mat hybrid composite

K. Balasubramanian et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterization and thermal kinetic analysis of pineapple leaf fibers and their reinforcement in epoxy

Jyoti Jain et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2019)

添加到收藏夹

Review Engineering, Multidisciplinary

Review on mechanical properties evaluation of pineapple leaf fibre (PALF) reinforced polymer composites

Santosh Sadashiv Todkar et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Textiles

Mechanical behavior of woven natural fiber fabric composites: Effect of weaving architecture, intra-ply hybridization and stacking sequence of fabrics

M. Rajesh et al.

JOURNAL OF INDUSTRIAL TEXTILES (2018)

添加到收藏夹

Article Engineering, Environmental

Mechanical Properties of Layered Laminated Woven Bamboo Gigantochloa Scortechinii/Epoxy Composites

Kannan Rassiah et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanical Properties of Natural Fiber Braided Yarn Woven Composite: Comparison with Conventional Yarn Woven Composite

Murugan Rajesh et al.

JOURNAL OF BIONIC ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Textiles

Studies on Mechanical and Morphological Characterization of Developed Jute/Hemp/Flax Reinforced Hybrid Composites for Structural Applications

Vijay Chaudhary et al.

Journal of Natural Fibers (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bending test in epoxy composites reinforced with continuous and aligned PALF fibers

Gabriel Oliveira Gloria et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Layering pattern effects on vibrational behavior of coconut sheath/banana fiber hybrid composites

K. Senthil Kumar et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Proceedings Paper Polymer Science

Mechanical and Thermal Properties of PALF Reinforced Epoxy Composites

T. T. Nagarajan et al.

MACROMOLECULAR SYMPOSIA (2016)

添加到收藏夹

Article Materials Science, Paper & Wood

Effect of Fiber Orientation on Mechanical Properties of Kenaf-Reinforced Polymer Composite

Ching Kuan Yong et al.

BIORESOURCES (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fabrication, characterization and modelling of laminated composites based on woven jute fibres reinforced epoxy resin

Hind Abdellaoui et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analyses of woven hemp fabric characteristics for composite reinforcement

M. I. Misnon et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of layering sequence and chemical treatment on the mechanical properties of woven kenaf-aramid hybrid laminated composites

R. Yahaya et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Polymer Science

Physical, Mechanical, and Morphological Properties of Woven Kenaf/Polymer Composites Produced Using a Vacuum Infusion Technique

Suhad D. Salman et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)

添加到收藏夹

Review Polymer Science

A Review on Pineapple Leaves Fibre and Its Composites

M. Asim et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of fiber content on mechanical, morphological and thermal properties of kenaf fibers reinforced poly(vinyl chloride)/thermoplastic polyurethane poly-blend composites

Y. A. El-Shekeil et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Potentiality of utilising natural textile materials for engineering composites applications

Mohd Iqbal Misnon et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Materials Science, Composites

Effect of jute fibre loading on the mechanical and thermal properties of oil palm-epoxy composites

M. Jawaid et al.

JOURNAL OF COMPOSITE MATERIALS (2013)

添加到收藏夹

Article Materials Science, Textiles

Interactive effect between warp and weft of a woven ramie fabric under biaxial loadings

Ge Wang et al.

JOURNAL OF THE TEXTILE INSTITUTE (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Woven hybrid composites: Tensile and flexural properties of oil palm-woven jute fibres based epoxy composites

M. Jawaid et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.