☆ 4.7 Article

Hierarchical Wrinkles for Tunable Strain Sensing Based on Programmable, Anisotropic, and Patterned Graphene Hybrids

POLYMERS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Environmental

High-strength, highly conductive and woven organic hydrogel fibers for flexible electronics

Xiangdong Wang et al.

Summary: This paper presents a new method to balance the electrical conductivity and mechanical strength of materials by embedding HEC in hydrogel, resulting in an organic hydrogel with high strength and high conductivity. Additionally, temperature-sensitive particles were added to prepare temperature-sensitive conductive fibers for multiple sensors in the future.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Environmental

Protein-assisted freeze-tolerant hydrogel with switchable performance toward customizable flexible sensor

Yu Wang et al.

Summary: The study developed a biocompatible hydrogel sensor with adjustable performance, exhibiting extreme self-adhesion and robust mechanical strength for personalized application requirements. The hydrogels demonstrated anti-freezing performance and fast, sensitive mechanical responsiveness, making them suitable for perceiving body motions and physiological movements on the skin.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A Wide-Range Linear and Stable Piezoresistive Sensor Based on Methylcellulose-Reinforced, Lamellar, and Wrinkled Graphene Aerogels

Guochen Li et al.

Summary: This study introduces a novel wide-range piezoresistive sensor based on methylcellulose reinforced reduced graphene oxide aerogel, which shows superior linearity, high sensitivity, fast response time, and reliable cyclic performance, making it suitable for various health monitoring and motion detecting applications.

ADVANCED MATERIALS TECHNOLOGIES (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

3D Printed Flexible Strain Sensors: From Printing to Devices and Signals

Haodong Liu et al.

Summary: The revolutionary advancements in flexible electronics offer great potential for wearable devices and electronic skin, with flexible strain sensors serving as essential components in integrated electronic systems. 3D printing technology is preferred for manufacturing flexible strain sensors due to its cost-effectiveness, accuracy, and efficiency. Various printing methods, such as DLP, FDM, and DIW, are discussed in this study, along with the sensing mechanisms of the printed sensors and suggestions for future research directions.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Fabrication of ultra-high working range strain sensor using carboxyl CNTs coated electrospun TPU assisted with dopamine

Yuhao Wang et al.

Summary: Fiber-based strain sensors with ultra-high working range and high gauge factor were developed in this study using electrospun TPU nanofibrous membrane coated with carboxyl CNTs. The sensors exhibited good washing fastness, electrical conductivity, and sensitivity to human body motions.

APPLIED SURFACE SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Mixed-acid intercalation for synthesis of a high conductivity electrochemically exfoliated graphene

Damilola Momodu et al.

Summary: Precise control of electrochemical intercalation and exfoliation conditions can tune the properties of graphene. The study shows that careful selection of intercalation time is crucial in controlling the defects in graphene, and phosphorus and nitrogen-doping can enhance graphene properties. Additionally, extending intercalation times deteriorated electrical conductivity but improved thermal stability.

CARBON (2021)

添加到收藏夹

Article Engineering, Manufacturing

Gas-permeable and highly sensitive, washable and wearable strain sensors based on graphene/carbon nanotubes hybrids e-textile

Dijie Yao et al.

Summary: Gas-permeable and wearable e-textile strain sensors based on reduced graphene oxide/carbon nanotubes (rGO/CNTs) hybrids exhibit high sensitivity with gauge factors of 34.69 and 1.21 kPa(-1) at 1% tensile strain and 8.85 kPa pressure, respectively, along with good repeatability, super-hydrophobic performance, washability, and durability. These sensors can be used for healthcare monitoring human body motion and blood pulse.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Flexible electronics from hybrid nanocomposites and their application as piezoresistive strain sensors

Mukaddes Sevval Cetin et al.

Summary: The study prepared conductive flexible polymer nanocomposites by incorporating conductive fillers into SEBS matrix, with hybrid composites generally showing higher sensitivity. Polymer type significantly influenced mechanical, electrical, and electromechanical properties, while test conditions directly affected material performance.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Physical

Knitted Ti3C2Tx MXene based fiber strain sensor for human-computer interaction

Xiyao Fu et al.

Summary: The fiber strain sensor developed based on Ti3C2Tx@P(VDF-TrFE) polymer nanofibers prepared via electrostatic spinning exhibits high gauge factor, rapid response, and outstanding durability, enabling real-time monitoring of human motions and physiological signals, and is suitable for wearable electronic devices.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Reduced graphene oxide coated polyurethane composite foams as flexible strain sensors for large deformation

Zhe Shi et al.

Summary: The combination of graphene composite with three-dimensional structure effectively enhances the properties of RPF composite foams, with higher density and smaller pore size samples demonstrating better elasticity and responsive piezoresistivity. The RPFs show good potential application as flexible and highly sensitive strain sensors for large deformation, with quick response times in compression and bending modes.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2021)

添加到收藏夹

Article Materials Science, Composites

Highly sensitive, flexible, green synthesized graphene/biomass aerogels for pressure sensing application

Shi Wei et al.

Summary: The study introduces a green and easy method to fabricate pressure sensors based on bacteria cellulose and caffeic acid-reduced graphene oxide composite aerogel, which shows high sensitivity, ultra-low detection limit, and fast response. The sensor performs well in monitoring human behaviors and subtle strains, with excellent reproducibility in pressure loading-unloading cycles.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Composites

Stretchable strain and temperature sensor based on fibrous polyurethane film saturated with ionic liquid

Niu Jiang et al.

Summary: This study presents a simple route to design multifunctional sensors for strain and temperature sensing by combining the electrospun technique and ultrasonication anchoring technique. The fabricated TPU/IL sensor exhibits fast response time, wide sensing range, and excellent durability for strain sensing, as well as high accuracy for temperature sensing.

COMPOSITES COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Composites

High performance dual strain-temperature sensor based on alginate nanofibril/graphene oxide/polyacrylamide nanocomposite hydrogel

Wenwen Hou et al.

Summary: This study developed a high-performance dual strain-temperature sensor based on alginate nanofibril/graphene oxide/polyacrylamide nanocomposite hydrogel, exhibiting superior mechanical properties and sensitivity, making it suitable for applications in human-machine interaction, artificial prosthetics, and electronic interconnects.

COMPOSITES COMMUNICATIONS (2021)

添加到收藏夹

Review Chemistry, Analytical

Recent Progress of Toxic Gas Sensors Based on 3D Graphene Frameworks

Qichao Dong et al.

Summary: Air pollution is a growing global concern. Sensors are being developed for detecting harmful gases, with graphene showing promise due to its high sensitivity. Recent studies have shown that graphene with a 3D structure can increase gas sensitivity levels.

SENSORS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Skin-Inspired Pressure Sensor with MXene/P(VDF-TrFE-CFE) as Active Layer for Wearable Electronics

Xiao-Quan Shen et al.

Summary: This study developed a new capacitive pressure sensor with high sensitivity and low cost, capable of detecting dynamic physiological signals and being competitive in the field of wearable electronics.

NANOMATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Using Folding Structure to Enhance Measurement Range, Sensitivity of the Flexible Sensors: A Simple, Eco-Friendly, and Effective Method

Junwen Zhu et al.

Summary: Flexible sensing technology has great application value in motion monitoring and physiological signal detection. A method based on folding structure is proposed to enhance the sensitivity and measurement range of sensors, which shows good hysteresis and repeatability properties. The proposed method is simple, economical, environment friendly, and widely suitable, with potential to fabricate high performance sensors.

ADVANCED MATERIALS TECHNOLOGIES (2021)

添加到收藏夹

Article Materials Science, Composites

Design of flexible strain sensor with both ultralow detection limit and wide sensing range via the multiple sensing mechanisms

Jianwen Chen et al.

Summary: This study introduces a new strategy for designing flexible strain sensors with ultralow detection limit and wide sensing range, utilizing a dual sensing layer with multiple sensing mechanisms. This innovative approach may address the longstanding challenge of high-performance flexible strain sensors.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Laser-assisted micropyramid patterned PDMS encapsulation of 1D tellurium nanowires on cellulose paper for highly sensitive strain sensor and its photodetection studies

Venkatarao Selamneni et al.

Summary: This work demonstrates the fabrication and successful application of tellurium-nanowires (Te-NWs)/paper based devices encapsulated with micropyramid patterned polydimethylsiloxane (PDMS) films as strain sensors and photodetectors, showing improved sensitivity and photoresponsivity. The devices were also successfully used to monitor angular movements in the human body, opening up avenues for research on tellurium-based flexible and wearable devices.

NANOTECHNOLOGY (2021)

添加到收藏夹

Article Instruments & Instrumentation

Graphene-based pressure sensor and strain sensor for detecting human activities

Kai Li et al.

Summary: Novel sensors, pressure sensors and strain sensors, were fabricated using the same materials and similar processes with high sensitivity and broad working range. The sensors can detect human activities such as breathing and wrist pulsing, making them suitable for wearable electronic devices for human health monitoring.

SMART MATERIALS AND STRUCTURES (2021)

添加到收藏夹

Article Instruments & Instrumentation

Highly stretchable and sensitive strain sensor based on Ti3C2-coated electrospinning TPU film for human motion detection

Boyu Zhao et al.

Summary: A stretchable strain sensor was developed using Ti3C2 decorated ETPU film, showing high gauge factor and durability. The sensor can monitor human motions like joint bending and pronunciation, holding promising application prospects in artificial skin and wearable health-care electronics.

SMART MATERIALS AND STRUCTURES (2021)

添加到收藏夹

Review Chemistry, Analytical

Advanced Flexible Skin-Like Pressure and Strain Sensors for Human Health Monitoring

Xu Liu et al.

Summary: Recent research has shown that flexible pressure and strain sensors integrated with the human body have great potential in healthcare. Significant progress has been made in the design strategies, sensor structures, performance parameters, and applications of these sensors. Future research should focus on improving the flexibility and sensitivity of flexible sensors, as well as their biocompatibility, versatility, and durability.

MICROMACHINES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solution-Processable Conductive Composite Hydrogels with Multiple Synergetic Networks toward Wearable Pressure/Strain Sensors

Huige Wei et al.

Summary: CCH is a biocompatible, flexible yet robust conductive composite hydrogel, with excellent mechanical strength, sensing performance, and fatigue resistance, suitable for wearable pressure/strain sensors. Additionally, CCH can monitor human motion and diagnose speech.

ACS SENSORS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Novel insights into the design of stretchable electrical systems

Louis Martin-Monier et al.

Summary: Soft electronics have attracted considerable interest due to their biomechanical compatibility. The study introduces the novel concept of periodic stretchable patterns combining multiple conductive materials to produce tailored responses, and demonstrates constant resistance-strain responses up to 50% elongation. Additionally, counterintuitive sinusoidal responses are achieved by integrating three materials, with potential applications in sensing and soft robotics.

SCIENCE ADVANCES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Laser Fabrication of Graphene-Based Flexible Electronics

Rui You et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tunable Fabrication of Conductive Ti3C2Tx MXenes via Inflating a Polyurethane Balloon for Acute Force Sensing

Shengpeng Han et al.

LANGMUIR (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hollow MXene Sphere/Reduced Graphene Aerogel Composites for Piezoresistive Sensor with Ultra-High Sensitivity

Meng Zhu et al.

ADVANCED ELECTRONIC MATERIALS (2020)

添加到收藏夹

Review Nanoscience & Nanotechnology

Bioinspired Multiscale Wrinkling Patterns on Curved Substrates: An Overview

Yinlong Tan et al.

NANO-MICRO LETTERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Controllable formation of periodic wrinkles in Marangoni-driven self-assembled graphene film for sensitive strain detection

Jia Yufei et al.

SCIENCE CHINA-MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

1D/2D Nanomaterials Synergistic, Compressible, and Response Rapidly 3D Graphene Aerogel for Piezoresistive Sensor

Xueyuan Cao et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Core-shell structured graphene aerogels with multifunctional mechanical, thermal and electromechanical properties

Jannatul Dil Afroze et al.

CARBON (2020)

添加到收藏夹

Article Chemistry, Analytical

An integrated all-solid-state screen-printed potentiometric sensor based on a three-dimensional self-assembled graphene aerogel

Jinghui Li et al.

MICROCHEMICAL JOURNAL (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hierarchical Reduced Graphene Oxide Ridges for Stretchable, Wearable, and Washable Strain Sensors

Jia Song et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bioinspired Superhydrophobic Papillae with Tunable Adhesive Force and Ultralarge Liquid Capacity for Microdroplet Manipulation

Yinlong Tan et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Skin-inspired flexible and high-sensitivity pressure sensors based on rGO films with continuous-gradient wrinkles

Jin Jia et al.

NANOSCALE (2019)

添加到收藏夹

Article Instruments & Instrumentation

RGO-coated elastic fibres as wearable strain sensors for full-scale detection of human motions

Qing Mi et al.

SMART MATERIALS AND STRUCTURES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Synergistical MXene/Reduced Graphene Oxide Aerogel for a Piezoresistive Sensor

Yanan Ma et al.

ACS NANO (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Epidermis Microstructure Inspired Graphene Pressure Sensor with Random Distributed Spinosum for High Sensitivity and Large Linearity

Yu Pang et al.

ACS NANO (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation of fabric strain sensor based on graphene for human motion monitoring

Hanna Lee et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Materials Science, Paper & Wood

Super-compressible, fatigue resistant and anisotropic carbon aerogels for piezoresistive sensors

Meng Wang et al.

CELLULOSE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superfast and high-sensitivity printable strain sensors with bioinspired micron-scale cracks

Honglie Song et al.

NANOSCALE (2017)

添加到收藏夹

Article Chemistry, Physical

Multi-dimensional flexible reduced graphene oxide/polymer sponges for multiple forms of strain sensors

Bao-Xun Zhang et al.

CARBON (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Flexible and Transparent Strain Sensors with Embedded Multiwalled Carbon Nanotubes Meshes

Bangbang Nie et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Physical

All-graphene strain sensor on soft substrate

Sungwoo Chun et al.

CARBON (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Highly Flexible Wrinkled Carbon Nanotube Thin Film Strain Sensor to Monitor Human Movement

Sun-Jun Park et al.

ADVANCED MATERIALS TECHNOLOGIES (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Stretchable and Sensitive Strain Sensor Based on Silver Nanowire-Elastomer Nanocomposite

Morteza Amjadi et al.

ACS NANO (2014)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.