☆ 4.6 Article

Experimental Tests and Numerical Simulations on the Ballistic Impact Response of a Highly Inhomogeneous Aluminium Foam

MATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

Design of a novel multi-walled tube-reinforced aluminum foam for energy absorption

Zhi-jia Zhang et al.

Summary: The novel MWTRF showed improved quasi-static compression performance and energy absorption compared to traditional structures, with AF stabilizing buckling and changing compression deformation modes. Numerical studies indicated that density distribution in MWTRF impacted energy absorption efficiency, with density of AF and thickness of EMWT affecting energy absorption capability. The proposed MWTRF demonstrated outstanding energy absorption efficiency compared to other core topologies on material selection map.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nondestructive Evaluation of Aluminium Foam Panels Subjected to Impact Loading

Gabriella Epasto et al.

Summary: An innovative Metallic Foam Shell protective device was proposed for protecting railway axles against flying ballast impact damage, with potential application in offshore structures. Experimental results demonstrated the excellent energy absorption capacity and mechanical properties of aluminium foam sandwich structures.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Construction & Building Technology

Mechanical properties and energy absorption capabilities of aluminium foam sandwich structure subjected to low-velocity impact

Ying Zhao et al.

Summary: This study investigates the dynamic behaviors, deformation and damage mechanisms, and energy absorption of aluminium foam sandwich structures subjected to low-velocity impact. Experimental and numerical analyses were conducted to evaluate the influences of face sheet thickness, core height, and density on the performance of energy absorption. The results show that the combination of impact energy and energy absorption indicators play a crucial role in the optimal design of sandwich structures.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Prediction and prevention of fracture defect in plastic forming for aluminum foam sandwich panel

Xi Zhang et al.

Summary: This study investigated the predicting and avoiding method of core fracture in plastic forming for aluminum foam sandwich panel (AFSP) by introducing ductile fracture criteria and conducting experiments and simulations. It was found that multi-step forming and increasing core relative density can reduce the risk of core fracture during curved AFSP forming.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical Study on the Plastic Forming of Doubly Curved Surfaces of Aluminum Foam Sandwich Panel Using 3D Voronoi Model

Xi Zhang et al.

Summary: The study presented a numerical investigation on the plastic forming of doubly curved surfaces of aluminum foam sandwich panels. It established a mesoscopic 3D Voronoi model to realistically describe the structure of closed-cell aluminum foam, and conducted simulations and experiments to analyze the deformation behaviors and forming defects. The results indicated that the Voronoi AFSP model accurately reflected the actual defects and demonstrated high forming accuracy in plastic forming of doubly curved sandwich panels.

METALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Finite element analysis of porous polymer coated pipelines subjected to impact

Ole Vestrum et al.

Summary: Subsea steel pipelines are often coated with external polymer coatings to provide corrosion protection and thermal insulation, while also contributing significantly to energy absorption during impact events. Through simulations and experiments, it is essential to further explore the strain-rate and thermal sensitivity of the coating material to improve the accuracy of modeling and predictions in pipeline design.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2021)

添加到收藏夹

Review Chemistry, Physical

Sandwich Structures for Energy Absorption Applications: A Review

Faris Tarlochan

Summary: It is essential to design proper engineering structures as energy absorbers for high dynamic loading situations, such as accidents, blasts, or impacts. One type of energy absorbers is sandwich structures, which are capable of absorbing high kinetic energy through irreversible deformation. These structures, particularly with foam and architected cores, show potential for wider applications due to their lightweight nature and high-energy absorption capabilities, despite the lack of consensus on a particular design among existing literature.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Composites

High-velocity perforation behaviour of sandwich panels with Al/SiCp composite foam core

M. Golestanipour et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Constitutive modeling of a graded porous polymer based on X-ray computed tomography

Ole Vestrum et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Al-Based Metal Foams (AMF) as Permanent Cores in Casting: State-of-the-Art and Future Perspectives

Graziano Ubertalli et al.

METALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Sandwich Panels with Polymeric Foam Cores Exposed to Blast Loading: An Experimental and Numerical Investigation

Kristoffer Aune Brekken et al.

APPLIED SCIENCES-BASEL (2020)

添加到收藏夹

Article Engineering, Mechanical

Low velocity impact on crash components with steel skins and polymer foam cores

Aase Reyes et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Finite element modeling of porous polymer pipeline coating using X-ray micro computed tomography

Ole Vestrum et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Physical

Experimental study on the quasi-static compression behavior of multilayer aluminum foam sandwich structure

Cheng-Xu Ren et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Review Engineering, Mechanical

Dynamic compressive behaviour of cellular materials: A review of phenomenon, mechanism and modelling

Yongle Sun et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Quasi-static behaviour of crash components with steel skins and polymer foam cores

Aase Reyes et al.

MATERIALS TODAY COMMUNICATIONS (2018)

添加到收藏夹

Article Engineering, Mechanical

Ballistic impact of layered and case-hardened steel plates

Jens Kristian Holmen et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Two-scale study of the fracture of an aluminum foam by X-ray tomography and finite element modeling

Clemence Petit et al.

MATERIALS & DESIGN (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modelling of aluminium foam core sandwich panels under impact perforation

A. Babakhani et al.

MATERIALS SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Mechanical

Impact perforation of sandwich panels with aluminum foam core: A numerical and analytical study

I. Elnasri et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2016)

添加到收藏夹

Article Engineering, Mechanical

Experimental validation of micromechanical models for brittle aluminium alloy foam

Liviu Marsavina et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)

添加到收藏夹

Review Materials Science, Multidisciplinary

Quantitative X-ray tomography

E. Maire et al.

INTERNATIONAL MATERIALS REVIEWS (2014)

添加到收藏夹

Article Mechanics

Blast resistance and multi-objective optimization of aluminum foam-cored sandwich panels

Chang Qi et al.

COMPOSITE STRUCTURES (2013)

添加到收藏夹

Article Engineering, Mechanical

Low-velocity perforation behavior of composite sandwich panels with aluminum foam core

Zhibin Li et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2013)

添加到收藏夹

Article Engineering, Marine

Comparison of aluminium sandwiches for lightweight ship structures: Honeycomb vs. foam

V. Crupi et al.

MARINE STRUCTURES (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recent Trends in Aluminum Foam Sandwich Technology

John Banhart et al.

ADVANCED ENGINEERING MATERIALS (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Property variations in large AlSi7 alloy foam ingots

Francesca Campana et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

添加到收藏夹

Article Engineering, Mechanical

Ballistic impact experiments of metallic sandwich panels with aluminium foam core

Weihong Hou et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Aluminium Foam Sandwich Panels: Manufacture, Metallurgy and Applications

John Banhart et al.

ADVANCED ENGINEERING MATERIALS (2008)

添加到收藏夹

Article Mechanics

On the ballistic resistance of double-layered steel plates: An experimental and numerical investigation

S. Dey et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)

添加到收藏夹

Article Engineering, Mechanical

Perforation of aluminium foam core sandwich panels under impact loading - An experimental study

H. Zhao et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2007)

添加到收藏夹

Article Engineering, Industrial

Prediction of fracture in hub-hole expanding process using a new ductile fracture criterion

Y. K. Ko et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)

添加到收藏夹

Article Mechanics

The response of clamped sandwich plates with metallic foam cores to simulated blast loading

DD Radford et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)

添加到收藏夹

Article Engineering, Mechanical

The use of metal foam projectiles to simulate shock loading on a structure

DD Radford et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2005)

添加到收藏夹

Article Mechanics

Aluminum foam-filled extrusions subjected to oblique loading: experimental and numerical study

A Reyes et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2004)

添加到收藏夹

Article Materials Science, Composites

X-ray tomography applied to the characterization of cellular materials. Related finite element modeling problems

E Maire et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

添加到收藏夹

Article Mechanics

Constitutive modeling of aluminum foam including fracture and statistical variation of density

A Reyes et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2003)

添加到收藏夹

Article Engineering, Mechanical

Validation of constitutive models applicable to aluminium foams

AG Hanssen et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2002)

添加到收藏夹

Article Mechanics

A computational model of viscoplasticity and ductile damage for impact and penetration

T Borvik et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Isotropic constitutive models for metallic foams

VS Deshpande et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.